4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter

#ad
Deegoo #ad - Controllable angle range from 0 to 180 degrees, excellent linearity, precision control. Specification:Connector Wire Length 300mm/11. 8 inchoperating Speed: 017sec / 60 degrees 4. 8v no loadOperating Speed: 013sec / 60 degrees 6. 0v no loadstall torque: 12kg/cm6V, 13kg/cm7. 2voperation Voltage: 3. 0v - 7. 2vgear type: all metal gearsdead band width: 4usplug specification: JR FUTABA and so onTemperature range: -30 - +60degItem Size: 40

7*19. 7*42. 9mm1. 6*078*1. 69inchservo weight: 55gcontrol specifications:Control Method: PWMPulse Width: 500-2500Duty Ratio: 05ms-2. 5mspulse period: 20msconnection:red wire: +yellow wire: pwm/signalbrown wire: gndfeatures:gear type: all metal gearspower supply: Through External AdapterStable and Shock ProofCompliant with most standard receiver connector: Futaba, Hitec, GWS etcGreat for biped robot / robot / remote control car, Sanwa, suitable for models of 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraftNote:1.

4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter #ad - . Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can;t turn up to claimed degree. 2.

More information about Deegoo #ad

2 Sets Servo Mount Bracket 2 DOF for MG995 MG996R S3003 Steering Gear Pan and Tilt Mount Robot Car Boat

#ad
elechawk #ad - Compatible with tower pro mg996, hitec, parallax, hs422, mg996r, mg995, sg5010, futaba s3003, mg995r or hs322, etc 40×20×36mm servo. This set bracket can be assembled to a 2 Degree of Freedom gimbal. Package included: 2 x aluminum alloy multi-function servo bracket 2 x Short U-type servo bracket 2 x Ball bearing 2 x Screw set 4 x Metal Servo horn Notice: The Kit comes with hardwarebearing and screws kit and NOT include servos.

The servo bracket can also be used in the shoulders and knees or another joint of humanoid robots, biped robots etc. Pan and Tilt for a horizontal surface. A camera or sensor can be mount on the bracket for a robot or a rover. Include 2 sets servo mount. High quality ball bearing, rotating smoothly. Aluminium matte coat, light and strong.

More information about elechawk #ad


Similar products



Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control

#ad
Miuzei #ad - No load running Speed: 009±001 sec/60° at 4. 8v rotary angle: 120°. Pan and Tilt for a horizontal surface. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally. The servo bracket can also be used in the shoulders and knees or another joint of humanoid robots, biped robots etc.

Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control #ad - Application fields: remote control helicopters, micro robot, robot arm and boats. Interface type: compatible with jr & futaba interface. High quality ball bearing, rotating smoothly. A camera or sensor can be mount on the bracket for a robot or a rover. All kind of r/c Toys and Arduino experiments. Miuzei sg90 9g micro servo motor kit for rc robot arm helicopter airplane remote control product specificationmode number:ms18 control specification:control system:change the pulse widthamplifier type:analog controlleroperating trave:l120°±10° 900→2100 μsecLeft&Right travelling Angle deviation:≤ 6°Centering deviation:≤ 1°Neutral position:1500 μsecDead band width:7 μsecRotating direction:Counter Clockwise 900→2100μsecPulse width range:900→2100 μsecMaximum travel:About 120° 900→2100 μsecApply Environmental Condition:Operating Temperature Range:-10℃~50℃Operating Voltage Range:4.

8v~6. 0v electrical specification Function of the Performance:Operating speed at no load 009±001 sec/60°4.

More information about Miuzei #ad


Similar products



HiLetgo PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot

#ad
HiLetgo 3-01-1070 #ad - High quality ball bearing, rotating smoothly. The pca9685 chip is wrapped in the center of the board. No load running Speed: 009±001 sec/60° at 4. 8v rotary angle: 120°. A camera or sensor can be mount on the bracket for a robot or a rover. Aluminium matte coat, light and strong. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally.

HiLetgo PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot #ad - Communication Interface: IIC. Pan and Tilt for a horizontal surface. Interface type: compatible with jr & futaba interface. Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec. Voltage: dc5-10V power supply. Compatible with tower pro mg996, mg995r or hs322, futaba s3003, mg995, Parallax, hitec, sg5010, mg996r, HS422, etc 40×20×36mm servo.

This set bracket can be assembled to a 2 Degree of Freedom gimbal. 16-way steering gear control. The servo bracket can also be used in the shoulders and knees or another joint of humanoid robots, biped robots etc. Application fields: remote control helicopters, micro robot, robot arm and boats.

More information about HiLetgo 3-01-1070 #ad


Similar products



Favordrory 30 Pieces 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts, 5 Sizes

#ad
Favordrory #ad - All kind of r/c Toys and Arduino experiments. 16-way steering gear control. Pan and Tilt for a horizontal surface. All pwm output lines have a 220 ohm series resistor protection and can easily drive LED. The pca9685 chip is wrapped in the center of the board. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally.

Communication Interface: IIC. Interface type: compatible with jr & futaba interface. Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec. A camera or sensor can be mount on the bracket for a robot or a rover. Size: 5 different lengths of 10 cm/ 3. 95 inch, 15 cm/ 5. 9 inch, 30 cm/ 11. 8 inch, 50 cm/ 19. 7 inch and 60 cm/ 23.

Favordrory 30 Pieces 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts, 5 Sizes #ad - 6 inch, each length has 6 pieces servo extension cords. Quantity: this package includes 30 pieces of female to male servo extension cable, enough for you to use, different length can meet your different needs.

More information about Favordrory #ad


Similar products



Smraza 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Airplane Car Boat Control with Cable, Mini Servos Arduino Project

#ad
Smraza #ad - Voltage: dc5-10V power supply. High quality ball bearing, rotating smoothly. Fit for all kind of r/c toys and also make electronics DIY based on Arduino, Raspberry Pi. Interface type: compatible with jr & futaba interface. If you have any technical questions, please feel free to contact our support staff via Amazon.

The pca9685 chip is wrapped in the center of the board. All kind of r/c Toys and Arduino experiments. Operating Voltage: 4. 8v~6. 0v. We have a professional engineering team dedicated to providing tutorials and support to help you get started. Apply environmental condition: operating Temperature Range: -10℃~50℃ Operating Voltage Range: 4.

Smraza 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Airplane Car Boat Control with Cable, Mini Servos Arduino Project #ad - 8v~6. 0v 2. Aluminium matte coat, light and strong. Compatible with tower pro mg996, mg995r or hs322, sg5010, mg995, mg996r, Parallax, HS422, futaba s3003, hitec, etc 40×20×36mm servo. This set bracket can be assembled to a 2 Degree of Freedom gimbal. Electrical specification Function of the Performance: Operating speed at no load: 0

More information about Smraza #ad


Similar products



ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant

#ad
ELEGOO EL-CB-001 #ad - Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec. Good connector: the connector of these wires are Futaba style connector with 3 pins, and it has an angle, in case you will install incorrectly, very convenient. Feature: female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.

We'd like to receive your valuable suggestions for our products and make your idea come true. Stall torque 4. 8v: 17. 5oz /in 1kg/cm. Maximum angle: 120°. Aluminium matte coat, light and strong. Faster transfer rates and more memory. Control using atmel atmega328p chipthe same with Arduino UNO R3. Fit for all kind of r/c toys and also make electronics DIY based on Arduino, Raspberry Pi.

ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant #ad - Interface type: compatible with jr & futaba interface. Amplifier type: analog controller. Comes with 1 year warranty and lifetime technical Support. So we can control the quality of our productions by ourselves for you.

More information about ELEGOO EL-CB-001 #ad


Similar products



4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat

#ad
Deegoo #ad - Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally. Communication Interface: IIC. Fit for all kind of r/c toys and also make electronics DIY based on Arduino, Raspberry Pi. Interface type: compatible with jr & futaba interface.

4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat #ad - The brown one is the Ground so connect to it Arduino Ground. Maximum angle: 120°. 16-way steering gear control. I believe it is a good tool for you. Amplifier type: analog controller. Running speed at no load: 009 ± 001 sec/60°4. 8v 008 ± 001 sec/60°6V. Small size and light weight. Application: used for fixed-wing, KT, small robot, helicopter, glider, robotic arm and other models.

Amplifier type:analog controller Operating voltage: 4. 8v~6.

More information about Deegoo #ad


Similar products



ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

#ad
ELEGOO EL-SM-003 #ad - 100% compatible with the Arduino IDE and RoHS Compliant. All kind of r/c Toys and Arduino experiments. Features: - a, c, b, d four-phase LED indicates the status of the stepper motor work. The pca9685 chip is wrapped in the center of the board. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally.

Communication Interface: IIC. Operating Voltage: 4. 8v~6. 0v. Dead band setting: 7 microseconds. Voltage: dc5-10V power supply. Size: 5 different lengths of 10 cm/ 3. 95 inch, 15 cm/ 5. 9 inch, 30 cm/ 11. 8 inch, 50 cm/ 19. 7 inch and 60 cm/ 23. 6 inch, each length has 6 pieces servo extension cords. Quantity: this package includes 30 pieces of female to male servo extension cable, enough for you to use, different length can meet your different needs.

ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino #ad - New improvement: clear prints on the female header connector, more precise and easier to use the wire. The elegoo uno r3 board now uses an atmega16u2 instead of the ATMega8U2 chip.

More information about ELEGOO EL-SM-003 #ad


Similar products



4-Pack MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

#ad
Deegoo #ad - Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec. Amplifier type:analog controller Operating voltage: 4. 8v~6. 0v. Fit for all kind of r/c toys and also make electronics DIY based on Arduino, Raspberry Pi. Interface type: compatible with jr & futaba interface. Dead band setting: 7 microseconds. Specifications: compliant with most standard receiver connector: Futaba, Sanwa, Hitec, GWS etc.

. The pca9685 chip is wrapped in the center of the board. Operating Voltage: 4. 8v~6. 0v. Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board with a little gift. Mg996r micro servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. Stable and Shock Proof. Stall torque 4. 8v: 17. 5oz /in 1kg/cm.

4-Pack MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot #ad - Running speed at no load: 009 ± 0

More information about Deegoo #ad


Similar products



EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables

#ad
EDGELEC ED-DP_L20_Mix_120pcs #ad - Micro servo motor for 1:10 RC car robot helicopter servo remote controlled aircraft for DIY. Package include: 20cm 7. 9inch / 40pin male to female jumper wires / 40pin Female to Female jumper wires / 40pin Male to Male jumper wires Total 120pcs. Connector type: standard 2. 54mm pitch dupont housing connector / 1pin-1pin.

Please note: the starting current of the motor should be over than 1A. A camera or sensor can be mount on the bracket for a robot or a rover. Running speed at no load: 009 ± 001 sec/60°4. 8v 008 ± 001 sec/60°6V. Amplifier type: analog controller. 16-way steering gear control. Package include: 20cm 7. 9inch / 40pin male to female jumper wires / 40pin female to Female jumper wires / 40pin Male to Male jumper wires Total 120pcs Include 2 sets servo mount.

EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables #ad - New improvement: clear prints on the female header connector, more precise and easier to use the wire. The elegoo uno r3 board now uses an atmega16u2 instead of the ATMega8U2 chip. Mg996r micro servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor.

More information about EDGELEC ED-DP_L20_Mix_120pcs #ad


Similar products