AKK A1 Mini 5.8Ghz 25mW VTX Raceband 600TVL 1/4 Cmos FPV AIO Camera with Clover Antenna for FPV Racing Drone

#ad
AKK #ad - Specification:output power: 25mW Input power: 3. 2-5v current consumption:3. 2v-5v, 200ma camera resolution: 600tvl video system:ntsc mini illumination: 1 lux Field of view: 120°viewing angle Antenna dimensions: 22mm X 29mm diameter Antenna: 4 lobe right hand circular polarized Frequency: 5. 8ghz 5 bands 37 channels Size: 18.

7*13mml*wpackage includes: 1x a1 aio fpv camera1x cable1x ManualThe 4-leaf antenna is an upgraded version of the 3-leaf antennas Super light weight:4. 5g, small size: 18. 7*13mml*W. Integrated booster circuit prevents motor and servo interference. Its signal range is ideal for park flyers or racing quads. Feature: Compatible with 5.

AKK A1 Mini 5.8Ghz 25mW VTX Raceband 600TVL 1/4 Cmos FPV AIO Camera with Clover Antenna for FPV Racing Drone #ad - 8ghz googles and monitor. It's just one more way AKK technology lets you have more fun with fewer hassles. All in one vtx + camera + antenna, plug and play, ready to fly. 37 channel with raceband, button control instead of switches to change channels, good quality image with zero latency, show with LED Digital Display.

Integrated booster circuit prevents motor interference, Signal Range Suitable for Ultra Micro RC Aircraft. Installs in seconds. 4-leaf antenna for better signal transmission, easy to install.

More information about AKK #ad

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

#ad
Crazepony #ad - Solder your power wires to the Battery input pads and your ready to fly. Print settings:print: 3d typerafts: noSupports: NoInfill: 100%SizeL*W*H: 4 * 2. 2 * 1. 3 cmpackage including1 * fpv camera mountblack1 * fpv Camera MountWhite1 * FPV Camera MountOrange This is a camera/vtx mount for the blade inductrix.

Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g. 3pcs inductrix fpv camera mount tiny whoop for Quadcopter CameraSummary:This is a Camera/VTX mount for the Blade Inductrix. Only fit for fx798t fx797T MC-01 camera. Weighs in at 2~3g. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera #ad - 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount Works well with the 1. 8 lense on these cameras.

All stock hardware is used, super simple installation.

More information about Crazepony #ad


Similar products



Makerfire 2pcs 5.8GHz FPV Antenna Circular Polarized TX RX RHCP RPSMA for FPV Racing Drone Like QAV250

#ad
Makerfire #ad - 5. 8g fpv antenna circular polarized omni cloud spirit tx rx rpsma for fpv multicopterthis circular polarized omni antenna can be used both at VTx antenna andVRxantennaSpecification: Frequency range: 5600-5950 MHzGain : 3DBiSWR: andlt;1. 53db horizontal lobe width: 360°3db verticle lobe width: 120°max power: 50wresistance: 50Ωlightning protection: dc GroundedPolarization: RHCPConnector: RPSMASize: 105×35mm feeder line 75mm)Weight: 12gMaterial: Cu--------------------Package Including2 * 5.

8g circular polarized omni Antenna RPSMA This is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g. Gain: 3dbi, frequency range: 5600-5950 MHz. 5. 8 ghz circular polarized Antenna Set for transmitter and receiver. Omnidirectional: 3db horizontal lobe width: 360°, 3dB verticle lobe width: 120°.

Makerfire 2pcs 5.8GHz FPV Antenna Circular Polarized TX RX RHCP RPSMA for FPV Racing Drone Like QAV250 #ad - Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation.

More information about Makerfire #ad


Similar products



Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone

#ad
Sinopine WT05 #ad - Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Connector: RPSMA. It is a combination of a FPV camera, a transmitter and an antenna. 5. 8 ghz circular polarized Antenna Set for transmitter and receiver. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation. Easy installation for racing drone, Only 3. 4g. All in one vtx + camera + antenna, plug and play, ready to fly. Description : the AIO Camera combo is perfect for ultra micro drone. Micro size and light weight only 3.

Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone #ad - 4g specification: Frequency:5. 8ghz 6 bands 48 channels, with raceband: 5658-5917MHz Output power:25mW Input voltage: 3. 3v-5. 5v current consumption: 280matyp camera resolution: 600tvl field of view: 120° Video Format:NTSC Antenna: Dipole Brass Antenna Size: 15X 12.

More information about Sinopine WT05 #ad


Similar products



Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft

#ad
Wolfwhoop #ad - Adjustable power 25mw/50mW/200mW, Long transmission range and less blink. 5. 8 ghz circular polarized Antenna Set for transmitter and receiver. Button contro l instead of switches to change channels. The aio camera combo is perfect for ultra micro drone. Omnidirectional: 3db horizontal lobe width: 360°, 3dB verticle lobe width: 120°.

Compatible with more types of RX. Micro size, light weight. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Connector: RPSMA. All in one vtx + camera + antenna, plug and play, ready to fly. High image resolution, good image contour and perfect low illumination.

Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft #ad - Plug and play, ready to fly, perfect for DIY. Specification: output power:0/25mw/50mw/200mW adjustable Set output power on 0, to avoid frequency interference Input power: 3. 2-5. 5v current consumption: 250ma-510ma25mw 270ma-640ma50mw 330ma-740ma200mw camera resolution: 600tvl video system:ntsc mini illumination: 1 lux Field of view: 120°FOV 150°DFOV Antenna dimensions: 22mm X 29mm diameter Antenna: cloverleaf antenna Frequency: 5.

8ghz 5 bands 40 channels, with raceband: 5658-5917 MHZ Size: 19. 50*14.

More information about Wolfwhoop #ad


Similar products



Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter

#ad
Wolfwhoop WR832 #ad - Button contro l instead of switches to change channels. We do not suggest over-voltage battery or car battery. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation.

Wolfwhoop is never good at brand promotion, the only thing we do is manufacturering. High image resolution, good image contour and perfect low illumination. Adjustable power 25mw/50mW/200mW, Long transmission range and less blink. Two switching buttons: easy to change frequency channels and bands. 40 channels: 5 bands and all frequencies compatible, b, Cover A, E, F, r bands.

Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter #ad - Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadcopter, airplane and boat etc. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Connector: RPSMA. Long range more than 2km range in the open area - Plug and play.

Power by 1S lipo battery.

More information about Wolfwhoop WR832 #ad


Similar products



HOBBYMATE M3 Nylon Standoffs 4mm for FPV Drone Quadcopter Building PC PCB Motherboard Standoffs

#ad
HOMEMART #ad - The aio camera combo is perfect for ultra micro drone. Two switching buttons: easy to change frequency channels and bands. Button contro l instead of switches to change channels. 5. 8 ghz circular polarized Antenna Set for transmitter and receiver. All in one vtx + camera + antenna, plug and play, ready to fly.

Easy installation for racing drone, Only 3. 4g. High image resolution, good image contour and perfect low illumination. Power by 1S lipo battery. Power off memory: Replay the very last frequency band and channel. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble.

HOBBYMATE M3 Nylon Standoffs 4mm for FPV Drone Quadcopter Building PC PCB Motherboard Standoffs #ad - Connector: RPSMA. Adjustable power 25mw/50mW/200mW, Long transmission range and less blink. Total 180 pieces. Plug and play, ready to fly, perfect for DIY. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1.

8 lense on these cameras. All stock hardware is used, super simple installation.

More information about HOMEMART #ad


Similar products



4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

#ad
Crazepony #ad - Power off memory: Replay the very last frequency band and channel. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation.

40 channels: 5 bands and all frequencies compatible, E, Cover A, F, b, r bands. Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadcopter, airplane and boat etc.180pcs nylon standoffs hex Spacers/ Screws/ Nuts Assorted Kit. Multifunction: the assortment come with Nylon Hex Spacers, applies to fpv drone building, Screw, pc pcb motherboard, Stand-off, Nut, audunio project.

4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector #ad - There are 3 millimeter bouth size come with beautiful single plastic box. Premium quality: all products are made of durable nylon, Strong, anticorrosive, compact and portable. What you get: 180pcs black m3 nylon hex Spacers Screw Nut Assortment, and our 18-month warranty and friendly customer service. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation.

This battery will give you higher rpms more power and a considerably longer flight time. High density with great safety fits tiny whoop--------------------Package Including4 * 230mAh HV 1S Lipo Battery 30C 3.

More information about Crazepony #ad


Similar products



EACHINE VR-007 Pro 5.8G 40CH FPV Goggles 4.3 Inch Video Headset Glasses with 3.7V 1600mAh Battery

#ad
EACHINE 5864146688 #ad - Working temperature: -20℃-80℃ package included: 1 x Eachine VR-007 Pro Goggles 1 x 3. 7v 1600mah battery 1 x rp-sma antenna 1 x usb charging cable 2 x Alcohol Cloth 1 x Manual This is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g. Description: brand: eachine item name : vr007 pro dimensionmm: 151x177x103 Weight : 217gbattery not included Battery Weight: 24g Screen Size: 4.

3 inch screen resolution: 480x272 Frequency Channel: built-in 40CH 5. 8ghz a/v automatic search receiver Antenna: 5. 8g 3db, rp-sma power Supply : 3. 7v-4. 2v battery : 1600mah 3. 7v 1s smart lipo battery, with power display function, supports USB 5V charging Current Consumption: 350-450mA Language Choice: multilinguals can be choosed in osd menuEnglish, French, Italian and so on.

EACHINE VR-007 Pro 5.8G 40CH FPV Goggles 4.3 Inch Video Headset Glasses with 3.7V 1600mAh Battery #ad - Omnidirectional: 3db horizontal lobe width: 360°, 3dB verticle lobe width: 120°. All in one vtx + camera + antenna, plug and play, ready to fly. Button contro l instead of switches to change channels. Material: cu, Weight: 12g. Tiny whoop Blade inductrix future choice of battery.

More information about EACHINE 5864146688 #ad


Similar products



SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2

#ad
onelinkmore OL0444-X #ad - Impedance:50Ω, insertion loss≤015db/3ghz, vswR≤1. 1;teflon insulator ; Color: Gold. Dimension: 54mm * 12. 5mm * 6mm, Weight: 6. 3g/per unit. Upgraded receiver, with Power Indicator and Frequency Display. Customized eyeglass, myopia below 400° needn't to wear glasses. Settled three-point fillet can reduce the pressure of long-time wear to the head.

High softness, more comfortable, ventilate and environmental sponge fit the contours of the face, less ambient light. Standard 1600mah 3. 7v 1s lipo battery, with power display function, supports USB 5V charging, long life. Sma 90 degree angle adapter jack to Plug; Commercial Grade SMA Series Adapters. Micro size, light weight.

All in one vtx + camera + antenna, plug and play, ready to fly. Product series:type sma is one kinf of rf coaxial connectors that is widely applied, characteristic impedance is 50 Ω, eg: connection for two-way radio, video, This SMA series is small threaded coaxial connectors with high frequency bandwidth, has a wide range of application, audio, with small-sized thread coupling, excellent performance, high reliability and long life, and other test equipment.

SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2 #ad - Product specification:temp range:-65~+165℃ pe cable-40~+85℃vibration:MIL-STD-202, Method 213Impedance:50ΩFrequency Range:DC~12. 4ghzworking voltage:335v maxinsulation resistance≥ 5000 MΩInsertion loss≤015 db/6ghzsma coaxial adapter body plating:goldplated connector material:Brass Gender:SMA Plug, male pin/SMA Jack, female pin Style:Right Angle Mounting Type:Free hanging This is a camera/vtx mount for the blade inductrix.

More information about onelinkmore OL0444-X #ad


Similar products



Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

#ad
Crazepony #ad - Omnidirectional: 3db horizontal lobe width: 360°, 3dB verticle lobe width: 120°. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: About 1. 8gno load speed: 65000±15% rpmrated load speed: 38500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1.

25mm jst plugquantity: 4 pcs 2 cw and 2 ccwWork for Blade Inductrix, Tiny Whoop, Nano QX etc. Package including2 * cw motor2 * CCW motor This is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g. Work for blade inductrix, Tiny Whoop, Nano QX etc.

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings #ad - Two switching buttons: easy to change frequency channels and bands. Button contro l instead of switches to change channels. Long range more than 2km range in the open area - Plug and play. 40 channels: 5 bands and all frequencies compatible, b, F, Cover A, E, r bands. Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadcopter, airplane and boat etc.

180pcs nylon standoffs hex Spacers/ Screws/ Nuts Assorted Kit. Multifunction: the assortment come with Nylon Hex Spacers, pc pcb motherboard, Nut, Stand-off, Screw, applies to fpv drone building, audunio project.

More information about Crazepony #ad


Similar products