FrSky Taranis Compatible Receiver X8R 8-channel 2.4ghz ACCST&RSSI&SBUS Easy To Use Receiver

#ad
FrSky #ad - Model name:x8r-pcb specifications: Dimension: 46. 47*26. 78*14. 12mm l *w *h weight: 16. 6g number of channels: 16ch 1~8ch from conventional channel outputs, 1~16ch from SBUS port or combine two X8R to become a 16 channels receiver With RSSI PWM output 0~3. 3v operating Voltage Range: 4. 0~10v operating current: [email protected] Operating Range: full range >1.

5km firmware upgradeable compatibility: frsky dft/djt/dht/dht-u in d_mode frsky taranis x9d plus/xjt in d8 mode frsky Taranis X9D Plus/XJT in D16 mode X8R-EU version only works with FrSky Taranis X9D Plus-EU version/XJT-EU version in D16-EU mode. 1more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

FrSky Taranis Compatible Receiver X8R 8-channel 2.4ghz ACCST&RSSI&SBUS Easy To Use Receiver #ad - 2parallel two x8R to become a 16 channel receiver. 3with rssi pwm output 0~3. 3v. Features: 1more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. 4smart port enabled, realizing two-way full duplex transmission. 5frsky Brand.

2parallel two x8R to become a 16 channel receiver.

More information about FrSky #ad

FrSky Taranis Compatible Receiver X8R 8-Channel 2.4ghz ACCST&RSSI&SBUS Easy to Use Receiver

#ad
FrSky NPH-01266 #ad - With rssi pwm output 0~3. 3v smartport enabled, realizing two-way full duplex transmission. The new smartport supports the new hub-less sensors as well as the older hub analog sensors. The x8r supports 8 standard servo outputs, and you can access all 16 channels by using the Sbus line with Sbus supported servos or use a FrSky S.

Bus decoder for the full 16 channels. For 8 channels in d8 mode you can use the frsky Taranis or XJT, DFT, DJT, DHT and DHT-U modules. Specifications: number of Channels: 16 Dimension: 46. 5mm x 27mm x 14. 4mm 1. 83" x 1. 06" x. 56" weight: 16. 8g. 59 oz operating VoltageRange: 4V-100v operating current: [email protected] Operating Range: >1.

FrSky Taranis Compatible Receiver X8R 8-Channel 2.4ghz ACCST&RSSI&SBUS Easy to Use Receiver #ad - 5km fullrange rssi output: analog voltage output 0~3. 3v compatibility: all 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode. Parallel two x8R to become a 16 channel receiver. Parallel two x8R to become a 16 channel receiver.

More information about FrSky NPH-01266 #ad


Similar products



COLCASE Fireproof Explosionproof Lipo Safe Bag for Lipo Battery Storage and Charging , Large Space Highly Sturdy Double Zipper Lipo Battery Guard 198x150x135mm

#ad
COLCASE #ad - Double zipper : double zipper make the lipo safe bag well sealed and convenient to use. Safeguard lipo battery : this flame retardant bag is a convenient way of safeguarding your Lipo batteries during charging, transit, and storage. Helps to contain flames in the event of a fire it is large enough to place multiple batteries at once This bag is made of premium quality: Solid built Lipo battery bag with high quality Velcro in the front, give more protection on the sides, holds your lipo battery safely Warning: Never leave charging battery unattended.

. Charge the batteries in the Safe charging bag for peace of mind and a higher level of safety. Specification : use: for safer charging and storage of lipo batteries Dimensions LxWxH: 19. 8*15*13. 5 cm weight: 150g material: textile fiberglass material with Fire retardant coating Package Contents: 1 x Lipo Battery Safe Bag With rssi pwm output 0~3.

COLCASE Fireproof Explosionproof Lipo Safe Bag for Lipo Battery Storage and Charging , Large Space Highly Sturdy Double Zipper Lipo Battery Guard 198x150x135mm #ad - 3v. Ensure the lipo safe bag is sealed while charging. The lipo safe bag is intended to reduce the chances of damaged in the event of a lipo fire. 100% fire proof ! stands up against fire and heat up to 1000 ℉550 ℃. No fiberglass annoy: Outer surface was painted with Fire retardant coating, no glass fiber will annoy anymore.

More information about COLCASE #ad


Similar products



FrSky Yaapu Telemetry Converter Cable Pixhawk to Taranis X9D Plus QX7 Jumper T16 Smart Port R9 Slim+ R9 X8R XSR R9M X4R Receiver

#ad
elechawk #ad - Double zipper : double zipper make the lipo safe bag well sealed and convenient to use. Safeguard lipo battery : this flame retardant bag is a convenient way of safeguarding your Lipo batteries during charging, transit, and storage. Set the protocol of the serial port to 10 passthrough FrSky telemetry via mission planner step3.

Specification: length: 20cm How to: step1. Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. All 16 channels requires the frsky taranis, djt, dft, or the xjt module bound in D16 mode.

FrSky Yaapu Telemetry Converter Cable Pixhawk to Taranis X9D Plus QX7 Jumper T16 Smart Port R9 Slim+ R9 X8R XSR R9M X4R Receiver #ad - . You can run yaapu frsky Telemetry Script or other scripts like FlightDeck and LuaPilott. Install script on your transmitter step2. For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DHT and DHT-U modules. Fireproof explosionproof safe bag : inner surface is made of supreme fire retardant fiberglass nylon.

100% fire proof ! stands up against fire and heat up to 1000 ℉550 ℃. No fiberglass annoy: Outer surface was painted with Fire retardant coating, no glass fiber will annoy anymore.

More information about elechawk #ad


Similar products



FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone

#ad
FrSky #ad - Ipex connector, replaceable antennas. Double zipper : double zipper make the lipo safe bag well sealed and convenient to use. Safeguard lipo battery : this flame retardant bag is a convenient way of safeguarding your Lipo batteries during charging, transit, and storage. Providing outstanding customer service is our number one priority.

Supports redundancy function Support telemetry and Smart Port enabled. Frsky ultra mini receiver R-XSR is the evolution of FrSky full range XSR receiver. 100% fire proof ! stands up against fire and heat up to 1000 ℉550 ℃. No fiberglass annoy: Outer surface was painted with Fire retardant coating, no glass fiber will annoy anymore.

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone #ad - The r-xsr is a standalone receiver with all the functions of XSR, in addition, it's almost 1/3 size and 1/3 weight of XSR receiver. Specifications Dimension: 16*11*5. 4mm l*w*h weight: 1. 5g number of channels: 16ch 1-16ch from sbus channel, 1~8ch from cppm channel operating Voltage Range: 4~10V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode With rssi pwm output 0~3.

3v. Large space : enough space to place multiple batteries at once about 15-20 pcs 2200mah 3S Lipo batteries 198x150x135mm. This cable can converter frsky telemetry from your flight controllerpixhawk1, x4rsB, R-XSR, 3, X6R, R9, x8r, X4R, R9M, RX8R, 2, S8R, 4 to the receiver R9 Slim+, XSR.

More information about FrSky #ad


Similar products



Onyehn 8 Pcs 4 Pairs XT60 XT-60 XT 60 Plug Male and Female Connector with Sheath Housing Cover with 150mm 12AWG Silicon Wire for RC Lipo Battery FPV Racing Drone 4 Pairs

#ad
Onyehn #ad - These original nylon xt60 plugs can handle over 60A current for extended periods without exceeding 80Degc Thanks to their better contact surface area. Switchable sbuS/ CPPM signal output. Ipex connector, replaceable antennas. Made from high-temp nylon and gold plated bullet connectors, both included in the injection mold at the time when forming the connector.

100% fire proof ! stands up against fire and heat up to 1000 ℉550 ℃. No fiberglass annoy: Outer surface was painted with Fire retardant coating, no glass fiber will annoy anymore. Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

Onyehn 8 Pcs 4 Pairs XT60 XT-60 XT 60 Plug Male and Female Connector with Sheath Housing Cover with 150mm 12AWG Silicon Wire for RC Lipo Battery FPV Racing Drone 4 Pairs #ad - All 16 channels requires the frsky taranis, djt, dft, or the xjt module bound in D16 mode. Supports redundancy function Support telemetry and Smart Port enabled. Large space : enough space to place multiple batteries at once about 15-20 pcs 2200mah 3S Lipo batteries 198x150x135mm. This cable can converter frsky telemetry from your flight controllerpixhawk1, s8R, RX8R, 4 to the receiver R9 Slim+, 3, 2, X6R, x4rsB, R9, R9M, R-XSR, X4R, x8r, XSR.

Make you get all flight information on the display of the transmitter like Jumper T16, Taranis X9D Plus QX7/X7S, Horus X10S X12S.

More information about Onyehn #ad


Similar products



VIMVIP 10pcs 300mm Male to Male Servo Extension Cable Lead Futaba JR Fre

#ad
NEXTANY #ad - Vimvip 10pcs 300mm male to male servo extension cable lead futaba jr fre description: 100% brand new 300mm servo extend line Length:300mm Used for RC Car, plane and helicopter servo connection or receiver connection! Package: 10 x VIMVIP RC Servo Extension Lead Cable-Male To Male With rssi pwm output 0~3.

3v. Large space : enough space to place multiple batteries at once about 15-20 pcs 2200mah 3S Lipo batteries 198x150x135mm. This cable can converter frsky telemetry from your flight controllerpixhawk1, s8R, 4 to the receiver R9 Slim+, x8r, X4R, x4rsB, 3, X6R, 2, RX8R, R9M, R9, R-XSR, XSR. Make you get all flight information on the display of the transmitter like Jumper T16, Taranis X9D Plus QX7/X7S, Horus X10S X12S.

VIMVIP 10pcs 300mm Male to Male Servo Extension Cable Lead Futaba JR Fre #ad - Suitable for yaapu frsky Telemetry Script or other scripts like FlightDeck and LuaPilott. 20cm length with many adapter cables for different flight controllers and receivers. Ultra mini size and light weight. Male to male servo Extension Cable Lead Futaba JR. Used for rc car, plane and helicopter servo connection or receiver connection!

For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DHT and DHT-U modules. Fireproof explosionproof safe bag : inner surface is made of supreme fire retardant fiberglass nylon. 100% fire proof ! stands up against fire and heat up to 1000 ℉550 ℃.

More information about NEXTANY #ad


Similar products



Xiangtat 4pcs RC GPS Folding Antenna Mount Holder Set Kit for Drone Multicopter Quadcopter DJI WKM NAZA YS X4 X6

#ad
Lotus Mall #ad - Supports redundancy function Support telemetry and Smart Port enabled. Sturdy build with the ability to fold into a lowered position. Fits most multi-rotors using 2 screw points. Adopt aluminum turning and CNC manufacturing for durable to use. Male to male 300mm. Servo extend Line for Rc. Package include:10 x VIMVIP Futaba Servo Cable.

Compatible with all gps sticks. Switchable sbuS/ CPPM signal output. Fits most multi-rotors using 2 screw points. Specifications: material: plastic Color: Black, Silver Random color Height: 13cm Dia. 3cm compatible with: for qav 250 etc multi copter net weight per pc : 11g please attention, so please check it before you bid it, we will send random color item to you as our stock, thanks for your understanding Package Including 4 * GPS Folding Antenna Mount Holder With rssi pwm output 0~3.

Xiangtat 4pcs RC GPS Folding Antenna Mount Holder Set Kit for Drone Multicopter Quadcopter DJI WKM NAZA YS X4 X6 #ad - 3v. Double zipper : double zipper make the lipo safe bag well sealed and convenient to use. Safeguard lipo battery : this flame retardant bag is a convenient way of safeguarding your Lipo batteries during charging, transit, and storage. Compatible with all gps sticks gps folding Antenna Mount Holder for Quadcopter Multi copter Sturdy build with the ability to fold into a lowered position.

. Easy to install and use.

More information about Lotus Mall #ad


Similar products



Universal GPS Antenna Mount Folding Bracket Anodized Aluminum Carbon

#ad
USAQ #ad - For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DHT and DHT-U modules. Fireproof explosionproof safe bag : inner surface is made of supreme fire retardant fiberglass nylon. Double zipper : double zipper make the lipo safe bag well sealed and convenient to use. Safeguard lipo battery : this flame retardant bag is a convenient way of safeguarding your Lipo batteries during charging, transit, and storage.

Ipex connector, replaceable antennas. Rod diameter: about 4mm, Red, Height: about 16. 2cm. Gps folding antenna Mount Holder for Quadcopter Multi copter. Supports redundancy function Support telemetry and Smart Port enabled. Large space : enough space to place multiple batteries at once about 15-20 pcs 2200mah 3S Lipo batteries 198x150x135mm.

Universal GPS Antenna Mount Folding Bracket Anodized Aluminum Carbon #ad - This cable can converter frsky telemetry from your flight controllerpixhawk1, r9M, R9, RX8R, 2, x8r, X6R, x4rsB, 4 to the receiver R9 Slim+, S8R, X4R, 3, R-XSR, XSR. Make you get all flight information on the display of the transmitter like Jumper T16, Taranis X9D Plus QX7/X7S, Horus X10S X12S. Suitable for yaapu frsky Telemetry Script or other scripts like FlightDeck and LuaPilott.

20cm length with many adapter cables for different flight controllers and receivers. Ultra mini size and light weight.

More information about USAQ #ad


Similar products



OEM - Flame Wheel Landing Gear for DJI Flame Wheel 450/550 Set 4 PCS

#ad
0 6958265104114 #ad - Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. All 16 channels requires the frsky taranis, djt, dft, or the xjt module bound in D16 mode.

Color: black, Silver, Blue. Ipex connector, replaceable antennas. Male to male servo Extension Cable Lead Futaba JR. Used for rc car, plane and helicopter servo connection or receiver connection! Male to male 300mm. Servo extend Line for Rc. Package include:10 x VIMVIP Futaba Servo Cable. Compatible with all gps sticks.

OEM - Flame Wheel Landing Gear for DJI Flame Wheel 450/550 Set 4 PCS #ad - Supports redundancy function Support telemetry and Smart Port enabled. Sturdy build with the ability to fold into a lowered position. Fits most multi-rotors using 2 screw points. Adopt aluminum turning and CNC manufacturing for durable to use. Includes: 4 pc Landing Gear and Screws. Rod diameter: about 4mm, Red, Height: about 16.

More information about 0 6958265104114 #ad


Similar products



Pixnor Apm2.6 MWC GPS Compass Antenna Folding Fixed Mount Bracket Holder for DJI Red

#ad
Pixnor 172354O63OI5005 #ad - Us-based customer service & technical support - should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST. 100% brand new and high quality cNC Aluminum GPS Folding Antenna Base Mount Holder Bracket Set.

Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. All 16 channels requires the frsky taranis, dft, djt, or the xjt module bound in D16 mode.

Pixnor Apm2.6 MWC GPS Compass Antenna Folding Fixed Mount Bracket Holder for DJI Red #ad - Switchable sbuS/ CPPM signal output. Description the item is a professional and practical GPS folding antenna base mount holder set, which mainly adopts aluminum turning and CNC manufacturing for durable to use, and is suitable for most DJI quadcopter and multicopter. Rod diameter: about 4mm, Height: about 16.

2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use.

More information about Pixnor 172354O63OI5005 #ad


Similar products