Hobbypark Adjustable Pushrod Connector Linkage Stoppers D1.8mm RC Model Plane Parts Pack of 25

#ad
DNhobby #ad - Pack of 25pcs push Connectors +1 Piece hex wrench. Diameter of the hole:1. 8mm fit 1. 5 / 1. 6 / 1. 7 / 1. 8mm. Net weight:Approx 086g/pc. Item: linkage Stoppers D1. 8mm package include: 25xLinkage Stoppers D1. 8mm 1 x hex wrench Features: Diameter of the Hole:1. 8mm suitable for Pushrods 1. 5 / 1. 6 / 1. 7 / 1. 8mm only work for linear movement, not on servos Compatibile with:RC Airplane Note:Check your specific model's manual for compatibility, or Contact us.

More information about DNhobby #ad

Hobbypark 25pcs Adjustable Pushrod Connector Linkage Stoppers D1.3mm RC Airplane Plane Parts

#ad
DNhobby #ad - Diameter of the hole:1. 3mm fit pushrods 1. 0 / 1. 2 / 1. 1 / 1. 3mm. Net weight:Approx 07g/pc. Pack of 25pcs push Connectors +1 Piece hex wrench. Item: linkage Stoppers D1. 3mm package include: 25xLinkage Stoppers D1. 3mm 1 x hex wrench Features: Diameter of the Hole:1. 3mm suitable for Pushrods 1. 0 / 1. 1 / 1. 2 / 1. 3mm only work for linear movement, not on servos Compatibile with:RC Airplane Note:Check your specific model's manual for compatibility, or Contact us.

More information about DNhobby #ad


Similar products



Hobbypark 25-Pack Adjustable D2.1mm Pushrod Connector Linkage Stoppers RC Model Airplane Replacement

#ad
DNhobby #ad - Pack of 25pcs push Connectors +1 Piece hex wrench. Diameter of the hole:2. 1mm; fit Pushrods 1. 8 / 1. 9 / 2. 0mm. Item: linkage Stoppers D2. 1mm package include: 25xLinkage Stoppers D2. 1mm 1 x hex wrench Features: Diameter of the Hole:2. 1mm suitable for Pushrods1. 8 / 1. 9 / 2. 0mm only work for linear movement, not on servos Compatibile with:RC Airplane Note:Check your specific model's manual for compatibility, or Contact us.

25xpushrod Connectors. 1x piece hex wrench. Diameter of the hole:1. 3mm fit pushrods 1. 0 / 1. 2 / 1. 1 / 1. 3mm. Net weight:Approx 07g/pc. Approx 097g/pc.

More information about DNhobby #ad


Similar products



Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control

#ad
Miuzei #ad - Approx 097g/pc. Interface type: compatible with jr & futaba interface. All kind of r/c Toys and Arduino experiments. No load running Speed: 009±001 sec/60° at 4. 8v rotary angle: 120°. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally.

Diameter of the hole:2. 1mm; fit Pushrods 1. 8 / 1. 9 / 2. 0mm. 25xpushrod Connectors. Pack of 25pcs push Connectors +1 Piece hex wrench. Miuzei sg90 9g micro servo motor kit for rc robot arm helicopter airplane remote control product specificationmode number:ms18 control specification:control system:change the pulse widthamplifier type:analog controlleroperating trave:l120°±10° 900→2100 μsecLeft&Right travelling Angle deviation:≤ 6°Centering deviation:≤ 1°Neutral position:1500 μsecDead band width:7 μsecRotating direction:Counter Clockwise 900→2100μsecPulse width range:900→2100 μsecMaximum travel:About 120° 900→2100 μsecApply Environmental Condition:Operating Temperature Range:-10℃~50℃Operating Voltage Range:4.

Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control #ad - 8v~6. 0v electrical specification Function of the Performance:Operating speed at no load 009±001 sec/60°4.

More information about Miuzei #ad


Similar products



Ernst Manufacturing Ultra Stand for Model Airplanes

#ad
Ernst Manufacturing, Inc 157 #ad - Removable cradles push-fit into base; features two tool compartments. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally. Model airplane stand safely holds your plane during assembly and maintenance.

Diameter of the hole:2. 1mm; fit Pushrods 1. 8 / 1. 9 / 2. 0mm. Interface type: compatible with jr & futaba interface. Constructed of lightweight, sturdy plastic, The Ultra stand is fuel proof and not affected by paint or adhesives. The stand will hold most planes from a park flyer-size model up to about a. 60 sport or trainer.

Ernst Manufacturing Ultra Stand for Model Airplanes #ad - 1x piece hex wrench. Includes foam rubber padding to protect your paint or coating. Measures 9. 5 by 18 by 11. 5 inches. Pack of 25pcs push Connectors +1 Piece hex wrench.

More information about Ernst Manufacturing, Inc 157 #ad


Similar products



Finware 10 Pair Amass XT30U XT30 Upgrade Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

#ad
Finware #ad - Brand name: amassitem name: xt30ubanana plug: 2mmmetal material: Brass gold-platedPlastic Material: PA66Flammability Rating: UL94 V0Contact Resistance: 070mΩrated voltage: dc 500vrated current: 15ainstantaneous Current: 30ARecommend Use: 1000 timesRecommend Cable Spec. 14-18 awgrecommend temperature: -20°c ~ 120°c xt-30 XT30 XT30U Diameter of the hole:1.

3mm fit pushrods 1. 0 / 1. 2 / 1. 1 / 1. 3mm. Net weight:Approx 07g/pc. Interface type: compatible with jr & futaba interface. High temperature Nylon Material XT-30 Xt-30u connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. 25xpushrod Connectors. Made of high temperature nylon the plug is also less likely to deform or melt.

Finware 10 Pair Amass XT30U XT30 Upgrade Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery #ad - 12" black and 12" Red 3. 5mm high quality Heat Shrink Tubing 2:1 included. All kind of r/c Toys and Arduino experiments. No load running Speed: 009±0

More information about Finware #ad


Similar products



Hangar 9 Sealing Iron Sock, HAN141

#ad
Hangar 9 #ad - Application fields: remote control helicopters, micro robot, robot arm and boats. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally. Model airplane stand safely holds your plane during assembly and maintenance.

. Heat shrink 3. 5mm 2:1 both red and Black Included - 2 Feet Total. Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec. Removable cradles push-fit into base; features two tool compartments. All kind of r/c Toys and Arduino experiments. Hangar 9 sealing iron sock, HAN141 Diameter of the hole:1. 3mm fit pushrods 1.

Hangar 9 Sealing Iron Sock, HAN141 #ad - 0 / 1. 2 / 1. 1 / 1. 3mm. Net weight:Approx 07g/pc. Constructed of lightweight, sturdy plastic and is fuel proof.

More information about Hangar 9 #ad


Similar products



WMYCONGCONG 15 Nylon Control Horns 21x11 mm + Pushrod Connector Linkage Stopper 1.3mm + 1.2 x 210mm Steel Push Rods Parts for RC Airplane Plane

#ad
WGCD #ad - Interface type: compatible with jr & futaba interface. Includes foam rubber padding to protect your paint or coating. Measures 9. 5 by 18 by 11. 5 inches. Heat shrink 3. 5mm 2:1 both red and Black Included - 2 Feet Total. Amplifier type:analog controller Operating voltage: 4. 8v~6. 0v. Constructed of lightweight, sturdy plastic and is fuel proof.

. High temperature Nylon Material XT-30 Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally. Model airplane stand safely holds your plane during assembly and maintenance. Removable cradles push-fit into base; features two tool compartments.

WMYCONGCONG 15 Nylon Control Horns 21x11 mm + Pushrod Connector Linkage Stopper 1.3mm + 1.2 x 210mm Steel Push Rods Parts for RC Airplane Plane #ad - Specification: Push Rods: Diameter: 1. 2mm/0047" length: 210mm/8. 27" material: stainless steel Color: Silver Tone Weigth: 30g/1. 05oz suitable for gasoline airplanes, nitro airplanes and model boats. Linkage stopper: Overall Size: 3.

More information about WGCD #ad


Similar products



Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

#ad
Finware #ad - Heat shrink 2:1 both red and Black Included - 2 Feet Total. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally. Model airplane stand safely holds your plane during assembly and maintenance.

High temperature Nylon Material. All kind of r/c Toys and Arduino experiments. Pack of 25pcs push Connectors +1 Piece hex wrench. The plug is also less likely to deform or melt. 12" black and 12" red 5mm high Quality Heat Shrink Tubing 2:1 included. These original nylon xt60 plugs can handle 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area.

Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery #ad - Diameter of the hole:2. 1mm; fit Pushrods 1. 8 / 1. 9 / 2. 0mm. Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. Constructed of lightweight, sturdy plastic and is fuel proof. 25xpushrod Connectors.

More information about Finware #ad


Similar products



Top Flite MonoKote Jet White 6', TOPQ0204

#ad
Top Flite TOPQ0204 #ad - Monokote is also one of the most puncture- and scratch-resistant RC covering films on the market- qualities you'll find in all of the rich, vibrant colors available. Pack of 25pcs push Connectors +1 Piece hex wrench. Hangar 9 sealing Iron Sock, HAN141. Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec.

Fingerprint resistant and buffs to a high luster finish. Note: monokote requires high-heat application that is NOT suitable for use directly on foam models. Diameter of the hole:2. 1mm; fit Pushrods 1. 8 / 1. 9 / 2. 0mm. Top flite monokote jet White 6', TOPQ0204. High temperature Nylon Material XT-30 Heat shrink 2:1 both red and Black Included - 2 Feet Total.

Top Flite MonoKote Jet White 6', TOPQ0204 #ad - And once applied, its special adhesive gets a grip that not even years of accumulated exhaust residue can break. Amplifier type:analog controller Operating voltage: 4. 8v~6. 0v.

More information about Top Flite TOPQ0204 #ad


Similar products



Hobbypark Φ1.2mm x L180mm 7.1 inch Steel Z Pull / Push Rods Parts for RC Airplane Plane Boat Replacement Pack of 10

#ad
DNhobby #ad - Top flite monokote jet White 6', TOPQ0204. Xt-30u connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. Removable cradles push-fit into base; features two tool compartments. Rod diameter :Ø1. 2mm. Application fields: remote control helicopters, micro robot, robot arm and boats. Pack of 10 Heat shrink 2:1 both red and Black Included - 2 Feet Total.

Hangar 9 sealing Iron Sock, HAN141. Size:Φ1. 2mm x l180mm. No load running Speed: 009±001 sec/60° at 4. 8v rotary angle: 120°. 25xpushrod Connectors. Diameter of the hole:2. 1mm; fit Pushrods 1. 8 / 1. 9 / 2. 0mm. High temperature Nylon Material. 15 amp 30a instantaneous Current Handling Bullet Connectors. Constructed of lightweight, sturdy plastic and is fuel proof.

More information about DNhobby #ad


Similar products