Hobbypower Pixhawk PX4 32Bit Flight Controller + M8N GPS + Power Module +Shock Absorber for Multirotor FPV

#ad
Hobbypower #ad - Pixhawk V2. 4. 8 32bit flight controller - advanced 32 bit cortexm4 arm high performance processor, can; - integrated backup power supply and failure backup controller, can run rtos nuttx real time operating system; - 14* pwm/ actuator output; - bus interface uart, with hardware floating point processing unit - main frequency: 256k, 168mhz ram - 32 bit stm32f103 backup co processor sensor: - l3gd20 3 axis digital 16 bit gyroscope - LSM303D 3 axis 14 bit accelerometer /magnetometer - MPU6000 6 axis accelerometer / magnetometer - MS5611 high precision barometer Interface: - 5* UART, SPI, I2C, the main controller can be safely switched to backup control; - Provide automatic and manual mode; - Provide redundant power input and fault transfer function; - Color LED lamp; - Multi tone buzzer interface; - Micro SD to record flight data; Processor: - 32 bit 2M flash memory STM32F427 Cortex M4, 1*compatible high voltage, 2*hardware flow control - 2*CAN - Spektrum DSM/DSM2/DSM-X satellite receiver compatible input - Futaba SBUS compatible input and output - PPM signal input - RSSI PWM or voltage input - I2C - SPI - 3.

Hobbypower Pixhawk PX4 32Bit Flight Controller + M8N GPS + Power Module +Shock Absorber for Multirotor FPV #ad - 3 and 6. 6vadc input - external usb micro interface m8n gps Module - Receiver type 72-channel u-blox M8 engine - Nav. Bus interface uart, I2C, spi, CAN. Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control. Provide automatic and manual mode.

Update rate1 single gnss: up to 18 hz - concurrent gnss: up to 10 hz - memory ROM NEO-M8M/Q or Flash NEO-M8N - Supply voltage 1.

More information about Hobbypower #ad

HRB 4S Lipo Battery 14.8V Lipo 4S 6000mAh 50C with Deans T Plug for Traxxas Slash X-Maxx RC Buggy Truggy Crawler Monster Car ,Helicopter,Airplane

#ad
YOWOO #ad - 3. Don't put it beside the high temperature condition. Features: 1. Superior japan and Korea Lithium Polymer raw materials. Hrb professional lipo battery; Superior Japan and Korea Lithium Polymer raw materials. Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. Description:continuous discharge rate: 50c;voltage: 14.

HRB 4S Lipo Battery 14.8V Lipo 4S 6000mAh 50C with Deans T Plug for Traxxas Slash X-Maxx RC Buggy Truggy Crawler Monster Car ,Helicopter,Airplane #ad - 8v;cells : 4s; Dimension: 6. 1x1. 89x1. 42inch. Application:14. 8v 6000mah is compatible with traxxas x-maxx monster truck x-maxX 8S ,RC airplane, FPV, drone, car, boat, truck, Only if the voltage, dimension and the plug match, helicopter, then it will fit. We guarantee you'll love the hrb rC battery and if you aren't absolutely satisfied, returned it within 30 days for a full refund.

2. Don't over charge more than 4. 2v and dont over discharge below 3. 7v. 5. Check carefully the battery condition before using or charging. Dedicating to providing better flight experience.

More information about YOWOO #ad


Similar products



Readytosky 3DR Radio Telemetry Kit 915Mhz 100mW Air + Ground Module Open Source for Standard Version APM2.6 APM2.8 pixhawk 2.4.6 2.4.8 Flight Controller

#ad
Readytosky #ad - Application:14. 8v 6000mah is compatible with traxxas x-maxx monster truck x-maxX 8S ,RC airplane, boat, dimension and the plug match, drone, Only if the voltage, helicopter, truck, car, FPV, then it will fit. We guarantee you'll love the hrb rC battery and if you aren't absolutely satisfied, returned it within 30 days for a full refund.

Support otg of android Cellphones, and computer OTG. The latest 3dr digital design, beautiful, wiring complete, plus a separate shell, more secure, more stable data transmission. This 3d radio telemetry Kit is small size, light weightunder 4 grams without antenna. If you need download drivers, please check this link :https://www.

Readytosky 3DR Radio Telemetry Kit 915Mhz 100mW Air + Ground Module Open Source for Standard Version APM2.6 APM2.8 pixhawk 2.4.6 2.4.8 Flight Controller #ad - Silabs. Com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers. It can use with the standard APM and Pixhawk, didn't support other flight controllers due to there are many modified port. 3dr telemetry kit specifications - very small size - light weight under 4 grams without antenna - 915mhz - receiver sensitivity to -121 dbm - transmit power up to 20dbm 100mw / 250mw - transparent serial link - air data rates up to 250kbps - mavlink protocol framing and status reporting - frequency hopping spread spectrum FHSS - Adaptive time division multiplexing TDM - Support for LBT and AFA - Configurable duty cycle - Built in error correcting code can correct up to 25% data bit errors - Demonstrated range of several kilometers with a small omni antenna - Can be used with a bi-directional amplifier for even more range - Open source firmware - AT commands for radio configuration - RT commands for remote radio configuration - Adaptive flow control when used with APM - Based on HM-TRP radio modules, with Si1000 8051 micro-controller and Si4432 radio module Package including: 1pc X 3DR Radio Telemetry Kit 915mhz 100mW / 250mW Hrb professional lipo battery; Superior Japan and Korea Lithium Polymer raw materials.

Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. Description:continuous discharge rate: 50c;voltage: 14.

More information about Readytosky #ad


Similar products



BW® Glass Fiber Flight Controller Anti-vibration Damping Plate Shock Absorber Set for APM2.5/2.6 /KK /MWC

#ad
BW #ad - It can use with the standard APM and Pixhawk, didn't support other flight controllers due to there are many modified port. Suit for various kinds of flight controller, like APM 2. 5/2. 6, kk, mwc. Material: Glass fiber. Weight: 25g package includes: 1 x bw anti-vibration board 1 x bw anti-vibration ball 1 x bw Double-sided adhesive If any questions, please do not hesitate to contact us and we will try our best to help you ! Hrb professional lipo battery; Superior Japan and Korea Lithium Polymer raw materials.

BW® Glass Fiber Flight Controller Anti-vibration Damping Plate Shock Absorber Set for APM2.5/2.6 /KK /MWC #ad - Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. Description:continuous discharge rate: 50c;voltage: 14. 8v;cells : 4s; Dimension: 6. 1x1. 89x1. 42inch. Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in 4. Application:14. 8v 6000mah is compatible with traxxas x-maxx monster truck x-maxX 8S ,RC airplane, boat, dimension and the plug match, Only if the voltage, drone, helicopter, truck, FPV, car, then it will fit.

More information about BW #ad


Similar products



ShareGoo Mini OSD Module On Screen Display Video Record for APM APM2.8 Pixhawk PX4 Flight Controller Airplanes Strap

#ad
ShareGoo #ad - 1x sharegoo strap hrb professional lipo battery; Superior Japan and Korea Lithium Polymer raw materials. Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. Make sure you disconnect your USB cable from the APM 2 board before attempting to use the OSD. Description:continuous discharge rate: 50c;voltage: 14.

8v;cells : 4s; Dimension: 6. 1x1. 89x1. 42inch. 1. 1 apm has an companion OSD board called MinimOSD. Important note: you cannot connect use the OSD when your APM 2. 1. 1. Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in. This is useful if you're flying in first person View FPV mode or don't want to use a laptop at the field to see your telemetry data in the Mission Planner.

ShareGoo Mini OSD Module On Screen Display Video Record for APM APM2.8 Pixhawk PX4 Flight Controller Airplanes Strap #ad - Important note: you cannot connect use the osd when your apm 2. This is useful if you're flying in first Person View FPV mode or don't want to use a laptop at the field to see your telemetry data in the Mission Planner. Top quality Materials & Superb Craftsmanship.

More information about ShareGoo #ad


Similar products



powerday APM Power Module V1.0 XT60 Female Male Plug for APM2.8 APM2.6 APM Pixhawk Flight Controller

#ad
Rcmodel 49122 #ad - This is useful if you're flying in first person View FPV mode or don't want to use a laptop at the field to see your telemetry data in the Mission Planner. Important note: you cannot connect use the osd when your apm 2. It isnotdesigned to power servos. It is not designed to power servos. Description:continuous discharge rate: 50c;voltage: 14.

8v;cells : 4s; Dimension: 6. 1x1. 89x1. 42inch. Features: -the apm power module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. In addition the module also comes with BEC function, you can output 5.

powerday APM Power Module V1.0 XT60 Female Male Plug for APM2.8 APM2.6 APM Pixhawk Flight Controller #ad - 3 dc, 3a maximum continuous current for the flight control board to provide a stable power supply. Note: the power module is only designed to power apm, a rc receiver and APM accessories GPS, 3DR radio. Switching regulator outputs 5. 3v and 3A max. Application:14. 8v 6000mah is compatible with traxxas x-maxx monster truck x-maxX 8S ,RC airplane, boat, FPV, helicopter, drone, truck, car, dimension and the plug match, Only if the voltage, then it will fit.

We guarantee you'll love the hrb rC battery and if you aren't absolutely satisfied, returned it within 30 days for a full refund.

More information about Rcmodel 49122 #ad


Similar products



Readytosky M8N GPS Module Built-in Compass Protective Case with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 Flight Controller

#ad
Readytosky XGT60-BLACK #ad - Use your aircraft's own ESC/BEC for that. Special designed for pixhawk 2. 4. 6 2. 4. 8 flight controller, aSIN:B07CHQ7SZ4. Note:if you use it to aPM Flight Controller, Please replace the connect by yourself. The ultimate accuracy is 06 meters, actually almost 09 meters, greater than the previous generation NEO-7N 1.

4-1. 6 meters accuracy. A new generation m8n GPS, with low power consumption and high precision. The gps light only can light up when it search the satellite signal outdoor; ROM already been fix, it cannot be flash and change. Attention: the gps can only use in Pixhawk and APM Flight controller, it can't work with other flight controller.

Readytosky M8N GPS Module Built-in Compass Protective Case with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 Flight Controller #ad - Switching regulator outputs 5. 3v and 3A max. Is also connected via USB they share the same port. 40° c to 85° c - -40° c to 105° c - rohs compliant lead-free package includes 1xm8n gps module Built-in Compass - 1x Black GPS Holder ★Important:The GPS light only can light up when it search the satellite signal outdoor.

1. 1. Make sure you disconnect your USB cable from the APM 2 board before attempting to use the OSD.

More information about Readytosky XGT60-BLACK #ad


Similar products



Hobbypower PPM Encoder V2.0 for Pixhawk PPZ Mk MWC Megapirate APM Flight Controller

#ad
Hobbypower 4978 #ad - The design of the ppm Encoder is based on the Paperazzi PPM Encoder. Is also connected via USB they share the same port. This is useful if you're flying in first person View FPV mode or don't want to use a laptop at the field to see your telemetry data in the Mission Planner. Important note: you cannot connect use the osd when your apm 2.

Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in. In this case the board powered by fc dimensionmm: 28 x 19 x 5 weightg: 9include all wire package content as picture shows PPM Encoder x 1 10Pin input cable 60mm x1 4Pin output cable 100mm x1 Hrb professional lipo battery; Superior Japan and Korea Lithium Polymer raw materials.

Hobbypower PPM Encoder V2.0 for Pixhawk PPZ Mk MWC Megapirate APM Flight Controller #ad - Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. In case you would like to change the settings of the PPM encoder to invert the PPM signal and change the fail safe pre-defined values you will need an AVR ISP programmer in order to reprogram it. Switching regulator outputs 5.

3v and 3A max. Description:continuous discharge rate: 50c;voltage: 14. 8v;cells : 4s; Dimension: 6. 1x1.

More information about Hobbypower 4978 #ad


Similar products



YoungRC F450 Drone Frame Kit 4-Axis Airframe 450mm Quadcopter Frame Kit with Landing Skid Gear

#ad
YoungRC #ad - Large mounting tabs on main frame bottom plate for easy camera mounting. Make sure you disconnect your USB cable from the APM 2 board before attempting to use the OSD. Include one Strap. Firmware is free and was created by John Arne and Olivier Adler. 1. 1. Max input voltage: 30V, Max current sensing: 90A. Size: 10 x 8 x 1cm / 3.

YoungRC F450 Drone Frame Kit 4-Axis Airframe 450mm Quadcopter Frame Kit with Landing Skid Gear #ad - 9 x 3. 1 x 04in. This is useful if you're flying in first person View FPV mode or don't want to use a laptop at the field to see your telemetry data in the Mission Planner. Important note: you cannot connect use the osd when your apm 2. Easy assembly. Instructional video: https://www. Youtube. Com/watch?v=zgKRQ-jxSUE.

Top quality Materials & Superb Craftsmanship. Features: built from quality glass fiber and polyamide nylon. Switching regulator outputs 5. 3v and 3A max. Voltage and current measurement configured for 5V ADC.

More information about YoungRC #ad


Similar products



FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S

#ad
FrSky SG_B01HZB6XTI_US #ad - Number of channels: 16S-Bus : 8CPPM. Rssi output: analog voltage output 0~3. 3v. Operating current: [email protected] It can use with the standard APM and Pixhawk, didn't support other flight controllers due to there are many modified port. Suit for various kinds of flight controller, like APM 2. 5/2. 6, kk, mwc. Material: Glass fiber.

In case you would like to change the settings of the PPM encoder to invert the PPM signal and change the fail safe pre-defined values you will need an AVR ISP programmer in order to reprogram it. Ultra high strength material: Built from quality glass fiber and polyamide nylon. It is resistant to falling and impact.

FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S #ad - Integrated pcb connections for direct soldering of your ESCs, make your esc, power supply and other wiring more quickly and safely. Pre-threaded brass sleeves for all of the frame bolts. Colored arms for orientation to keep you flying in the right direction. Large mounting tabs on main frame bottom plate for easy camera mounting.

Description:continuous discharge rate: 50c;voltage: 14. 8v;cells : 4s; Dimension: 6. 1x1.

More information about FrSky SG_B01HZB6XTI_US #ad


Similar products



Radiolink Pixhawk PX4 32 Bit ARM Flight Controller + NEO-M8N GPS + Pixhawk Power Module for RC Multirotor Quad for RC Multirotor Quad with 4G Micro-SD

#ad
Radiolink #ad - Note: the power module is only designed to power apm, a rc receiver and APM accessories GPS, 3DR radio. Processor: 32bit stm32f427 arm cortex m4 core + fpu floating point unit 168 mhz / 256 kb ram / 2 mb ram 32bit stm32f103 fault protection coprocessor sensor: st micro l3gd20h 16 bit gyroscope st micro lsm303d 14 bit accelerometer/magnetometer invensense mpu 6000 3-axis accelerometer/gyroscope MEAS MS5611 barometer Package included: 1x Radiolink PIX Flight Controller ; 1x M8N GPS Module ;1x GPS Stand Holder ; 1x Power Module ;1x Safe Switch ; 1x Buzzer; 1x 4G Memory Card ; 1x Dupont Cable; 2x Adhesive Hrb professional lipo battery; Superior Japan and Korea Lithium Polymer raw materials.

Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. Switching regulator outputs 5. 3v and 3A max. In case you would like to change the settings of the PPM encoder to invert the PPM signal and change the fail safe pre-defined values you will need an AVR ISP programmer in order to reprogram it.

Radiolink Pixhawk PX4 32 Bit ARM Flight Controller + NEO-M8N GPS + Pixhawk Power Module for RC Multirotor Quad for RC Multirotor Quad with 4G Micro-SD #ad - Ultra high strength material: Built from quality glass fiber and polyamide nylon. It is resistant to falling and impact. Integrated pcb connections for direct soldering of your ESCs, make your esc, power supply and other wiring more quickly and safely. Pre-threaded brass sleeves for all of the frame bolts. Colored arms for orientation to keep you flying in the right direction.

More information about Radiolink #ad


Similar products