JUMPER R8 Full Duplex Telemetry Receiver RX

#ad
Jumper #ad - Jumper r8 full duplex telemetry receiver rxthe r8 receiver is the first receiver that can directly transmit the PIX and PX4 flight control data TX, RX to the remote control of the world, and can display the flight control data to the remote control through the APM script! This receiver will be very good with T16 as T16 has big color screen.

JUMPER R8 Full Duplex Telemetry Receiver RX #ad - Here is a video of showing how it works: https://www. Youtube. Com/watch?v=byaqqdhxf7o spec:number of channels: 8ch pWM / 16ch SBUSRSSI Signal Strength Indication output: PWMOperating voltage range: 4. 0~8. 4voperating current range: [email protected] distance: full distance >2. 0kmcompatibility: D8 mode D16 mode Jumper.

Jumper-R8-Receiver.

More information about Jumper #ad

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone

#ad
FrSky #ad - Specifications Dimension: 16*11*5. 4mm l*w*h weight: 1. 5g number of channels: 16ch 1-16ch from sbus channel, 1~8ch from cppm channel operating Voltage Range: 4~10V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Ultra mini size and light weight. Supports redundancy function Support telemetry and Smart Port enabled.

Moreover, there redundancy function is integrated into this tiny receiver ensures the security, and the IPEX connector makes it more convenient for you to replace antennas. Us-based customer service & technical support - should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST.

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone #ad - The r-xsr is a standalone receiver with all the functions of XSR, in addition, it's almost 1/3 size and 1/3 weight of XSR receiver. Ipex connector, replaceable antennas. Switchable sbuS/ CPPM signal output. Providing outstanding customer service is our number one priority. Frsky ultra mini receiver R-XSR is the evolution of FrSky full range XSR receiver.

More information about FrSky #ad


Similar products



18 PCS Anti-Slipping Switch Rubber Cap Sheath Cover for FrSky X9D QX7 Flysky Spektrum Transmitter

#ad
elechawk #ad - Package included: 18 pcs rubber cap 4 black, 2 white, 2 green and 2 transparentNote: If the rubber cap longer than your switch, 4 red, 2 blue, you can trim it to a proper length by scissors. Features: this anti-slipping rubber cap can be put on the switch of the transmitter to prevent slipping and reduce the pressure on your finger when you toggle the switch.

Us-based customer service & technical support - should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST. Ipex connector, replaceable antennas. If the rubber cap longer than your switch, you can trim it to a proper length by scissors.

18 PCS Anti-Slipping Switch Rubber Cap Sheath Cover for FrSky X9D QX7 Flysky Spektrum Transmitter #ad - The cap can be put on the switch of transmitter to prevent slipping and reduce pressure on finger when toggle the switch. Colorful rubber caps make it easy for you to recognize the function of each switch. Supports redundancy function Support telemetry and Smart Port enabled. Switchable sbuS/ CPPM signal output.

To make the remote control more comfortable. Providing outstanding customer service is our number one priority. Included 18 pcs rubber cap 4 black, 2 white, 4 red, 2 blue, 2 green and 2 transparent.

More information about elechawk #ad


Similar products



WINGONEER CP2102 Micro USB to TTL/Serial Module UART 6 Pin Serial Converter STC Downloader for Arduino

#ad
WINGONEER® WINGONEER #ad - Switchable sbuS/ CPPM signal output. Wingoneer trademark Reg. No:4747611wingoneer cp2102 micro usb to ttl/serial module uart 6 pin serial converter stc downloader For ArduinoProduct Description:Micro Mini-USB connection standard input connected to a computer USB interface cable with two power 3. 3v and 5v voltage outputWith a resettable fuse.

Embedded usB transceiver, without external circuit device. Micro mini-usb connection standard input connected to a computer USB interface cable with two power 3. 3v and 5V voltage output. In the event of accidental short, can effectively protect your downloads and computer USB portOnboard status indicator lights transceiver, properly installed rear drive status indicator lit, receiving indicator flashes when communicating with LED running lights.

WINGONEER CP2102 Micro USB to TTL/Serial Module UART 6 Pin Serial Converter STC Downloader for Arduino #ad - Supports baud rates from 300bps ~ 1mbps betweenusb block micro mini-usb interface for seatsmd components for the regular company of welding, without external circuit deviceContaining clock circuit, beautiful appearanceWith DTR trigger signal output can be directly pro mini ATMEGA328P board download programs and other communicationEmbedded USB transceiver, stable quality, no external circuitry isContains power-on reset circuitOn-chip voltage regulator output voltage 3.

3vin line with USB2. 0 specification requirementssuspend pin supports usb suspend stateasynchronous serial data bus compatible with all handshakes and modulation controller interface signals Supported data formats for 8 data bits, 1 stop bit and parity bitsConnotation 512 byte receive buffer and 512 byte transmit bufferSupport for hardware or X-ON / X-OFF handshakePackage included:1x WINGONEER CP2102 USB To TTL/Serial Module UART STC Downloader Ultra mini size and light weight.

Usb block micro mini-usB interface for seat. The cap can be put on the switch of transmitter to prevent slipping and reduce pressure on finger when toggle the switch.

More information about WINGONEER® WINGONEER #ad


Similar products