powerday S500 Quadcopter Fuselage Frame Kit PCB Version w/Carbon Fiber Landing Gear Skid

#ad
Rcmodel 49195 #ad - Feature -1. High quality pcb version carbon fiber material and exquisite design -2. Center plate with solder point -3. Frame only, no electronic parts < br>-4. Made carbon rod inside the arm, to make the arm hard and strong, not shake. Frame only, no electronic parts. S500 is a entry-level and practical multi-rotor air frame kit for F450 upgrade quadcopter, which are mainly made of durable PCB board and hard plastic materials.

High quality PCB version carbon fiber material and exquisite design. 5. Good qiality carbon fiber landing gear -Specification -1. Wheelbase: 500mm -2. Motor suggest: 2212 - 2216 size brushless motor -3. Prop suggest: 10"-12" -4. Battery suggest: 3s-4s 2200mAh-5200mAh -5. Esc suggest: 20a-40a -total weight with landing gear : 454g -package includes Unassembled -1x S500 quadcopter frame kit -1x Carbon fiber landing gear -1xpowerday strap Good qiality carbon fiber landing gear, Center plate with solder point.

More information about Rcmodel 49195 #ad

Readytosky 2212 920KV Brushless Motors CW CCW for F330 X525 F450 F500 F550 DJI Phantom Quadcopter4PCS

#ad
Readytosky #ad - Wider range - for f330 x525 450 500 550 dji phantom quadcopter Multirotor Stable performence - the design of a new type of impeller seat, more convenient disassembly. Specification: 2212 920kv Brushless Motor Outer diameter: 28. 0 mm height: 24. 0 mm without shaft kv: 920kv fit for dji phantom f330 x525 450 500 550quadcopter multirotor Rotation direction: Left hand tread Not Original DJI Phantom Product Feather: Good quality - With rigorous testing, you can take it easy to use.

Packed safely in Bubble Bag. Description: type : 22 x 12mm k v: 920kv fit for dji phantom f330 f450 f550 x525 rotation direction: right/Left hand tread CW/CCW Package Includes: 2 x right hand thread brushless motor CW 2 x left hand thread brushless motor CCW NO Color Box. Universal compatibility - the motor base is a multi group installation hole hole position chart, and to retain the appearance and the traditional motor consistency, compatible with the current market mainstream rack installation, to protect the coil and clean appearance Good quality - Rigorous testing.

Stable performence - the design of a new type of impeller seat providing more convenient disassembly. Low noise - the motors have gone through dynamic balance tests, to ensure that the motor runs stablely with low noise. Wider range of application - for f330 x525 f450 s500 F550 S550 DJI Phantom Quadcopter Multirotor.

Readytosky 2212 920KV Brushless Motors CW CCW for F330 X525 F450 F500 F550 DJI Phantom Quadcopter4PCS #ad - Universal compatibility - the motor base is a multi group installation hole hole position chart, compatible with many current market rack installations this helps to retain a clean appearance and protect the coil. Low noise - the whole system have gone through dynamic balance tests, to ensure that the motor running stablely with low noise.

More information about Readytosky #ad


Similar products



FrSky Taranis Compatible Receiver X8R 8-Channel 2.4ghz ACCST&RSSI&SBUS Easy to Use Receiver

#ad
FrSky NPH-01266 #ad - The new smartport supports the new hub-less sensors as well as the older hub analog sensors. The x8r supports 8 standard servo outputs, and you can access all 16 channels by using the Sbus line with Sbus supported servos or use a FrSky S. Bus decoder for the full 16 channels. For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DHT and DHT-U modules.

What's in the box: 1 x x8r 2 x short tool 1 x Manual Good quality - Rigorous testing. Stable performence - the design of a new type of impeller seat providing more convenient disassembly. Low noise - the motors have gone through dynamic balance tests, to ensure that the motor runs stablely with low noise.

FrSky Taranis Compatible Receiver X8R 8-Channel 2.4ghz ACCST&RSSI&SBUS Easy to Use Receiver #ad - Wider range of application - for f330 x525 f450 s500 F550 S550 DJI Phantom Quadcopter Multirotor. Universal compatibility - the motor base is a multi group installation hole hole position chart, compatible with many current market rack installations this helps to retain a clean appearance and protect the coil.

With rssi pwm output 0~3. 3v. Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

More information about FrSky NPH-01266 #ad


Similar products



Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

#ad
Finware #ad - Good quality - Rigorous testing. Stable performence - the design of a new type of impeller seat providing more convenient disassembly. Low noise - the motors have gone through dynamic balance tests, to ensure that the motor runs stablely with low noise. Wider range of application - for f330 x525 f450 s500 F550 S550 DJI Phantom Quadcopter Multirotor.

Universal compatibility - the motor base is a multi group installation hole hole position chart, compatible with many current market rack installations this helps to retain a clean appearance and protect the coil. With rssi pwm output 0~3. 3v. The plug is also less likely to deform or melt. 12" black and 12" red 5mm high Quality Heat Shrink Tubing 2:1 included.

Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery #ad - . The xt60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant. For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DHT and DHT-U modules. 10 pair high quality Female and Male XT60 Connectors. High temperature Nylon Material. Heat shrink 2:1 both red and Black Included - 2 Feet Total.

60 amp current Handling Bullet Connectors.

More information about Finware #ad


Similar products



HOBBYMATE M3 Nylon Standoffs 4mm for FPV Drone Quadcopter Building PC PCB Motherboard Standoffs

#ad
HOMEMART #ad - Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DHT and DHT-U modules. 10 pair high quality Female and Male XT60 Connectors. 60 amp current Handling Bullet Connectors. Total 180 pieces. Parallel two x8R to become a 16 channel receiver.

Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. All 16 channels requires the frsky taranis, dft, djt, or the xjt module bound in D16 mode. Come with the plastic box: spacers male-female 6mm + 6mm, m3 10pcs spacers male-female 8mm + 6mm, m3 10pcs spacers male-female 15mm + 6mm, m3 10pcs spacers male-female 12mm + 6mm, M3 10pcs Spacers Male-Female 10mm + 6mm, M3 10pcs Spacers Male-Female 20mm + 6mm, M3 10pcs Screws M3 x 6mm 60pcs Nuts M3 60pcs Package include: 1 Nylon Hex Screw Nut Assortment Kit in box Good quality - Rigorous testing.

HOBBYMATE M3 Nylon Standoffs 4mm for FPV Drone Quadcopter Building PC PCB Motherboard Standoffs #ad - Stable performence - the design of a new type of impeller seat providing more convenient disassembly. Low noise - the motors have gone through dynamic balance tests, to ensure that the motor runs stablely with low noise. Wider range of application - for f330 x525 f450 s500 F550 S550 DJI Phantom Quadcopter Multirotor.

Universal compatibility - the motor base is a multi group installation hole hole position chart, compatible with many current market rack installations this helps to retain a clean appearance and protect the coil. With rssi pwm output 0~3.

More information about HOMEMART #ad


Similar products



Support 3-6S Input, 5V/12V Output Support The LC Filter, w/Current Sensor - HOBBYMATE XT60 PDB Power Distribution Board

#ad
HOMEMART #ad - The battery should be 4s liPo 13~18V DC Voltage: 12. 0 +/- 03vdc continuous current: 500mA Max. 08a 5s/minute short-circuit tolerant 2 seconds/minute bec 12v3s lipo Output voltage= 3S LiPo voltage -1V Physical: Dimensions:36 x 50 x 4 mm without XT60 Mounting:305 x 305mm, Φ3mm Weight:7. 5g w/o xt60, 11gw/xt60 package including 1 * hobbymate xt60 power distribution Board 1 * 6PIN Connection Cable Good quality - Rigorous testing.

Stable performence - the design of a new type of impeller seat providing more convenient disassembly. Low noise - the motors have gone through dynamic balance tests, to ensure that the motor runs stablely with low noise. Wider range of application - for f330 x525 f450 s500 F550 S550 DJI Phantom Quadcopter Multirotor.

Support 3-6S Input, 5V/12V Output Support The LC Filter, w/Current Sensor - HOBBYMATE XT60 PDB Power Distribution Board #ad - Universal compatibility - the motor base is a multi group installation hole hole position chart, compatible with many current market rack installations this helps to retain a clean appearance and protect the coil. With rssi pwm output 0~3. 3v. Voltage:5. 0 +/- 01vdc continuous current:2 Amps9Max. 2.

More information about HOMEMART #ad


Similar products



LHI 4x 2212 920KV Brushless Motor CW / CCW + 4x SIMONK 30A ESC For DJI Phantom

#ad
Lighting Hobby LHI-2212-30ESC #ad - Current: 30a peak current: 40a 10s voltage: 2-3s lixx, bec: 5v/3a Size: 50x23x8mm Weight: ~28g Good quality - Rigorous testing. Stable performence - the design of a new type of impeller seat providing more convenient disassembly. Low noise - the motors have gone through dynamic balance tests, to ensure that the motor runs stablely with low noise.

Wider range of application - for f330 x525 f450 s500 F550 S550 DJI Phantom Quadcopter Multirotor. Universal compatibility - the motor base is a multi group installation hole hole position chart, compatible with many current market rack installations this helps to retain a clean appearance and protect the coil.

With rssi pwm output 0~3. 3v. 180pcs nylon standoffs hex Spacers/ Screws/ Nuts Assorted Kit. Multifunction: the assortment come with Nylon Hex Spacers, Nut, applies to fpv drone building, pc pcb motherboard, Stand-off, Screw, audunio project. There are 3 millimeter bouth size come with beautiful single plastic box.

LHI 4x 2212 920KV Brushless Motor CW / CCW + 4x SIMONK 30A ESC For DJI Phantom #ad - Premium quality: all products are made of durable nylon, anticorrosive, Strong, compact and portable. What you get: 180pcs black m3 nylon hex Spacers Screw Nut Assortment, and our 18-month warranty and friendly customer service. Hobbymate fpv drone pdb make the connection easy between the flight controller and PDB board and to the esc, what's more is if you don't have a socket for esc's, you can also solder the esc on the PDB board easy and make the building clean and clear.

12v output is designed Camera and LED board.

More information about Lighting Hobby LHI-2212-30ESC #ad


Similar products



BW® Glass Fiber Flight Controller Anti-vibration Damping Plate Shock Absorber Set for APM2.5/2.6 /KK /MWC

#ad
BW #ad - No low voltage cutoff, no over temp cutoff, because any cutoff in a multipotor = crash. Suit for various kinds of flight controller, KK, like APM 2. 5/2. 6, mwc. Material: Glass fiber. Weight: 25g. 60 amp current Handling Bullet Connectors. Weight: 25g package includes: 1 x bw® anti-vibration board 1 x bw® anti-vibration ball 1 x BW® Double-sided adhesive If any questions, please do not hesitate to contact us and we will try our best to help you ! Good quality - Rigorous testing.

Stable performence - the design of a new type of impeller seat providing more convenient disassembly. Low noise - the motors have gone through dynamic balance tests, to ensure that the motor runs stablely with low noise. Wider range of application - for f330 x525 f450 s500 F550 S550 DJI Phantom Quadcopter Multirotor.

BW® Glass Fiber Flight Controller Anti-vibration Damping Plate Shock Absorber Set for APM2.5/2.6 /KK /MWC #ad - Universal compatibility - the motor base is a multi group installation hole hole position chart, compatible with many current market rack installations this helps to retain a clean appearance and protect the coil. With rssi pwm output 0~3. 3v. 1. Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles.

Description: 1.

More information about BW #ad


Similar products



T-MOTOR Air Gear 350 Motor, Prop, and ESC Combo Pack for Quadcopter

#ad
T-MOTOR #ad - This t motor air gear 350 set is ideal for 1200g to 1500g quadcopter builds. T9545 plastic self-tightening props 2 CW+ 2 CCW. 4 pcs. Contents: 4 pcs. Heat shrink 2:1 both red and Black Included - 2 Feet Total. These escs have no BEC to reduce weight and interference. 4 pcs. The props are made in an efficient light-weight, high-strength plastic and provide 3 different attachment mechanisms: MT-style, MN-style, and self-tightening.

The t-motor air gear 350 set is ideal for 1200g to 1500g quadcopter builds. It features low noise and high speed response, and easy and quick installation. 60 amp current Handling Bullet Connectors. They feature 500 hz refresh rate, optimized throttle response, anti-interference design, ultra-low internal resistance, and minimized weight and size.

T-MOTOR Air Gear 350 Motor, Prop, and ESC Combo Pack for Quadcopter #ad - The props are made in an efficient light-weight, high-strength plastic and provide 3 different attachment mechanisms: MT-style, MN-style, and self-tightening. Escs: 4 pcs. T9545 plastic self-tightening props 2 cw and 2 ccw. Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. High temperature Nylon Material.

Hobbymate xt60-pdb was integrated bec 5v 3a the 12v 0

More information about T-MOTOR #ad


Similar products



iFlight 40pcs M3 Anti Vibration Rubber Damper Balls for FPV F4 F7 Flight Controller Soft Mount Shock Absorption Balls

#ad
iFlight #ad - Made of high quality rubber for lasting performance. It features low noise and high speed response, and easy and quick installation. Props: 4 pcs. Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

All 16 channels requires the frsky taranis, dft, djt, or the xjt module bound in D16 mode. High temperature Nylon Material. For f330 x525 450 500 550 dji phantom Quadcopter Multirotor. 2. 12v output is designed Camera and LED board. With a xt60 plug, easy to connect with your battery; support most popular flight controller CC3D naze32 SP Racing F3 F4 F7 FC.

iFlight 40pcs M3 Anti Vibration Rubber Damper Balls for FPV F4 F7 Flight Controller Soft Mount Shock Absorption Balls #ad - Hobbymate xt60-pdb was integrated bec 5v 3a the 12v 05a the output power for quadcopter camera, Receiver, VTX, Led Board and osd. Made of 4 layer board, 35mm* 50mm size, can output 4 * 50A current at the same time. 5v output is designed for flight controller, VTX, Receiver, OSD.180pcs nylon standoffs hex Spacers/ Screws/ Nuts Assorted Kit.

Multifunction: the assortment come with Nylon Hex Spacers, Screw, pc pcb motherboard, Stand-off, Nut, applies to fpv drone building, audunio project.

More information about iFlight #ad


Similar products



Pixnor Apm2.6 MWC GPS Compass Antenna Folding Fixed Mount Bracket Holder for DJI Red

#ad
Pixnor 172354O63OI5005 #ad - Rod diameter: about 4mm, Height: about 16. 2cm. Hobbymate xt60-pdb was integrated bec 5v 3a the 12v 05a the output power for quadcopter camera, VTX, Receiver, Led Board and osd. Made of 4 layer board, 35mm* 50mm size, can output 4 * 50A current at the same time. 5v output is designed for flight controller, VTX, Receiver, OSD.

Use for the newest f4 F7 flight controller on FPV quadcopter frame to anti vibration. Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in. No low voltage cutoff, no over temp cutoff, because any cutoff in a multipotor = crash. Suit for various kinds of flight controller, KK, like APM 2. 5/2. 6, mwc. Material: Glass fiber. 12v output is designed Camera and LED board.

Pixnor Apm2.6 MWC GPS Compass Antenna Folding Fixed Mount Bracket Holder for DJI Red #ad - With a xt60 plug, easy to connect with your battery; support most popular flight controller CC3D naze32 SP Racing F3 F4 F7 FC. For f330 x525 450 500 550 dji phantom Quadcopter Multirotor. 2. 180pcs nylon standoffs hex Spacers/ Screws/ Nuts Assorted Kit.

More information about Pixnor 172354O63OI5005 #ad


Similar products