Radiolink 2.4GHz R12DS RC Radio Receiver Support SBUS/PWM DSSS&FHSS AT9/AT9S/AT10/AT10II

RadioLink 1117703 - After all of the above steps were finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection. At least a half inch. 7. After all of the above steps were finished, the LED indicator will turn and keep in red. Put the transmitter and the receiver close to each other within 1 meters.

2. Turn on the transmitter, then power on the R12DS. 3. 5. Then the best RF signal condition is obtained at any flying attitude. On at9/at9s/at10/at10ii display when work with flight controller APM or PIX. Large model aircraft may has some metal part interfering signal; in this case the antennas should be placedat both sides of the model.

Radiolink 2.4GHz R12DS RC Radio Receiver Support SBUS/PWM DSSS&FHSS AT9/AT9S/AT10/AT10II - 7 4096 section precision, 025us per section, servo anti-shake rudder. 6. Keep the antennas away from the motor, ESC, and other noise sources as far as possible. 1. Press and hold the easy Link ID SET one second, then the receiver starts work.

More information about RadioLink 1117703

RadioLink PRM-03 OSD Telemetry Module for AT9S AT10 Remote Control Drone Suit PIX APM R9D R9DS R10D R10DII R10DS R12DS

RadioLink - 6. Currently supports PIX, APM flight control. Support le di r9d, r10d, r9ds, r10dii, r10ds and R12DS receiver. Size: 27 * 13mm 2. Return flight speed, altitude, rssi value, roll, flight mode, climb speed, throttle, GPS asterisk, latitude and longitude, battery voltage, heading, pitch and distance information.

Support le di r9d, r10dii, r9ds, r10d, r10ds and R12DS receiver. Return speed, latitude and longitude, throttle, gps asterisk, roll, battery voltage, climb speed, flight mode, rssi value, heading, altitude, pitch and distance information. Voltage recovery battery voltage acquisition BAT MAX = 52. 9v, support for 1S ~ 12S battery 3.

RadioLink PRM-03 OSD Telemetry Module for AT9S AT10 Remote Control Drone Suit PIX APM R9D R9DS R10D R10DII R10DS R12DS - 7-504v. Currently supports PIX, APM flight control. 4. Detail Technical Parameters 1. Voltage recovery battery voltage acquisition BAT MAX = 52. 9v, support for 1S ~ 12S battery 3. 7-504v product features osd is designed to overlay textual video, our OSD is different from the original meaning, not suitable for text video overlay.

More information about RadioLink


Similar products



Radiolink R9DS 2.4GHz RC Receiver 10CH SBUS/PWM Signal DSSS/FHSS Spread Spectrum Compatible with AT9/AT9S/AT10II/AT10

Radiolink pcb board - Tips: the old at9 or at10 upgrade the prm-03 module to the at9 to v1. 2. 6 osd firmware version before using the OSD message. Radiolink is a high technology manufacturing company dedicated to researching, manufacturing and marketing of RC model radio transmitters. Please always be sure about choosing "Radiolink Direct" official store before add to cart, we DO NOT authorize "vvBuy"store to sell it.

Double signal spread spectrum: radiolink r9dS 10 channels using DSSS and FHSS spectrum anti-interference technology, you don't worry about signal loss. Fast response and mini size: all channels will response within 3ms, fast and stable. You will get: an advanced technology receiver and a 12-month warranty from the brand Radiolink and 24-hour friendly customer service.

Radiolink R9DS 2.4GHz RC Receiver 10CH SBUS/PWM Signal DSSS/FHSS Spread Spectrum Compatible with AT9/AT9S/AT10II/AT10 - Support le di r9d, r10d, r10dii, r9ds, r10ds and R12DS receiver. Return speed, throttle, altitude, latitude and longitude, battery voltage, roll, flight mode, rssi value, gps asterisk, heading, climb speed, pitch and distance information. Voltage recovery battery voltage acquisition BAT MAX = 52. 9v, support for 1S ~ 12S battery 3.

7-504v. The at10 upgrades to the V1.

More information about Radiolink pcb board


Similar products



11.1V 2200mAh 8C 3S Li-poly Li-Po RC Battery Pack for JR FUTABA FlySky FS-TH9X Transmitter

Beacon Pet - Actually control range depends on the using environment. Support le di r9d, r10dii, r10d, r9ds, r10ds and R12DS receiver. Return speed, throttle, rssi value, gps asterisk, roll, flight mode, altitude, climb speed, battery voltage, heading, latitude and longitude, pitch and distance information. Voltage recovery battery voltage acquisition BAT MAX = 52.

9v, support for 1S ~ 12S battery 3. 7-504v. The battery with four connections High capacity rechargeable battery with low price. Please always be sure about choosing "Radiolink Direct" official store before add to cart, we DO NOT authorize "vvBuy"store to sell it. Double signal spread spectrum: radiolink r9dS 10 channels using DSSS and FHSS spectrum anti-interference technology, you don't worry about signal loss.

11.1V 2200mAh 8C 3S Li-poly Li-Po RC Battery Pack for JR FUTABA FlySky FS-TH9X Transmitter - Fast response and mini size: all channels will response within 3ms, fast and stable. Maximum charging current:1A. Continuous Dischage Rate:8C. Description Hot Power 11. 1v 2200mah 20c lithium battery. Tips: the old at9 or at10 upgrade the prm-03 module to the at9 to v1. 2.

More information about Beacon Pet


Similar products



Apex RC Products #1028 - 4 each - 3" 6" 12" 24" JR / Spektrum / Hitec Style Servo Extension Variety Pack

Apex RC Products - Silicone wires - made With High Quality 22Awg Wire. Apex rc products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. All of our products are high quality at a great value. Jr style Connectors. Note: the excess charging current may damage the battery. 4 of each length servo Extension - 16 Extensions In Total.

You will get: an advanced technology receiver and a 12-month warranty from the brand Radiolink and 24-hour friendly customer service. 11. 1v 2200mah 8c 3s li-poly li-Po RC Battery Pack. Fit for devo 10/devo 7/jr/futABA Transmitter. Currently supports PIX, APM flight control. Continuous Dischage Rate:8C. Maximum charging current:1A.

Apex RC Products #1028 - 4 each - 3" 6" 12" 24" JR / Spektrum / Hitec Style Servo Extension Variety Pack - Actually control range depends on the using environment. Tips: the old at9 or at10 upgrade the prm-03 module to the at9 to v1. 2. 6 osd firmware version before using the OSD message. Support le di r9d, r10d, r10dii, r9ds, r10ds and R12DS receiver.

More information about Apex RC Products


Similar products



Radiolink Smallest Receiver R6DS 6CH PPM PWM Output 3s Response for RadioLink AT9 AT10 Transmitter

Crazepony - Currently supports PIX, APM flight control. Silicone wires - made With High Quality 22Awg Wire. Support le di r9d, r10dii, r10d, r9ds, r10ds and R12DS receiver. Return speed, battery voltage, flight mode, gps asterisk, climb speed, latitude and longitude, altitude, rssi value, throttle, heading, roll, pitch and distance information.

Voltage recovery battery voltage acquisition BAT MAX = 52. 9v, support for 1S ~ 12S battery 3. 7-504v. Fit for devo 10/devo 7/jr/futABA Transmitter. Actually control range depends on the using environment. Continuous Dischage Rate:8C. Note: the excess charging current may damage the battery. The at10 upgrades to the V1.

Radiolink Smallest Receiver R6DS 6CH PPM PWM Output 3s Response for RadioLink AT9 AT10 Transmitter - 06 osd firmware version. 10 channels: support sbus and pwm signal, while use the sbus, it can connect 10 channels. Jr style Connectors. Tips: the old at9 or at10 upgrade the prm-03 module to the at9 to v1. 2.

More information about Crazepony


Similar products



Support 3-6S Input, 5V/12V Output Support The LC Filter 3030mm Mount - HOBBYMATE XT60 PDB Power Distribution Board

HOMEMART - Actually control range depends on the using environment. Silicone wires - made With High Quality 22Awg Wire. Fit for devo 10/devo 7/jr/futABA Transmitter. Battery capacity: real 2200mAh. 4 of each length servo Extension - 16 Extensions In Total. The at10 upgrades to the V1. 06 osd firmware version. 10 channels: support sbus and pwm signal, while use the sbus, it can connect 10 channels.

2oz copper foil, 4 layer, 1. 6mm pCB. Continuous Dischage Rate:8C. Jr style Connectors. Please always be sure about choosing "Radiolink Direct" official store before add to cart, we DO NOT authorize "vvBuy"store to sell it. Double signal spread spectrum: radiolink r9dS 10 channels using DSSS and FHSS spectrum anti-interference technology, you don't worry about signal loss.

Support 3-6S Input, 5V/12V Output Support The LC Filter 3030mm Mount - HOBBYMATE XT60 PDB Power Distribution Board - Fast response and mini size: all channels will response within 3ms, fast and stable. The battery should be 4s liPo 13~18V DC Voltage: 12. 0 +/- 03vdc continuous current: 500mA Max. 0

More information about HOMEMART


Similar products



Radiolink R12DSM 2.4GHz 12CH Mini RC Receiver SBUS/PPM Signal DSSS&FHSS Dual Spread Spectrum Racing Drones AT9/AT9S/AT10/AT10II

Radiolink SG_B07FPCQL3F_US - 2. Turn on the transmitter, then power on the R12DSM. We are committed to providing customers with a high reliability and high performance product solution, as well as providing technical support and friendly after-sales service. How to match Code with Transmitter:1. Put the transmitter and the receiver close to each other within 1 meters.

Radiolink is a high technology manufacturing company dedicated to researching, manufacturing and marketing of RC model radio transmitters. Our products included: RC transmitter, flight controller, GPS, receiver, drone etc. There is a black button on the r12dsm, after about blinking 8 times, press the binding button twice in two seconds and release, receiver light start blinking, match code success then receiver signal LED always on.

Radiolink R12DSM 2.4GHz 12CH Mini RC Receiver SBUS/PPM Signal DSSS&FHSS Dual Spread Spectrum Racing Drones AT9/AT9S/AT10/AT10II - The red led indicates the PPM and blue/purple indicates SBUS. R12dsm receiver specifications:channel: 12chsignal Output: SBUS/PPMWork Current: 40-180mA5V Power Supply: 4. 8~6vrf power:. 3. Sbus/ppm and pwm signal changeshort press the id SET switch two times within 1 second, the signal is changed from SBUS to PPM.

More information about Radiolink SG_B07FPCQL3F_US


Similar products



60A RC Brushless Motor Electric Speed Controller ESC 4A UBEC with XT60 & 3.5mm bullet plugs

RC Electric Parts - The rc electric parts 60a electric speed controller esc is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 3. 5mm bullet plugs and an xt60 plug, eliminating the need for you to solder your own plugs on! The ESC can be programmed via the transmitter as explained in the instructions or using a programming card that can be purchased separately.

Benefits: programmable super smooth and accurate linear throttle adjustment Supports high RPM motors Utilizes smaller MOSFETs to minimize weight Minimal heat dissipation Specs: Continuous: 60A Bursts 80A for 10 seconds UBEC: 5. 5v/4a lipo battery: 2 - 4s cells nicd/nimh: 5 - 12 cells size: 71mm x 35mm x 17mm weight: 68g motor type: brushless motor brushless MotorMax RPM: 240, or 40, 000 rpm for a 2 pole, 80, 000 rpm for a 6 pole, 000 rpm for a 12 pole brushless motorESC Manual: https://www.

60A RC Brushless Motor Electric Speed Controller ESC 4A UBEC with XT60 & 3.5mm bullet plugs - Rcelectricparts. Com/esc-product-instructions. Htmlprogramming Card Linkhttps://www. Amazon. Com/dp/b07gcvlj12?ref=myi_title_dp Currently supports PIX, APM flight control. Note: the excess charging current may damage the battery. Work with rc cars, Helicopters, planes, & Drones. Hobbymate fpv drone pdb make the connection easy between the flight controller and PDB board and to the esc, what's more is if you don't have a socket for esc's, you can also solder the esc on the PDB board easy and make the building clean and clear.

More information about RC Electric Parts


Similar products



Radiolink Mini PIX Flight Controller FC Speed Controller for FPV Racing Drone/Helicopter/Fixed Wing and More

Radiolink - Jr style Connectors. Please always be sure about choosing "Radiolink Direct" official store before add to cart, we DO NOT authorize other store to sell it. Stable signal technology: dual antenna dsss and FHSS dual spread spectrum anti-jamming technology to make the signal more stable, so you can not be interfered by other devices when you are outdoors.

Super mini size: the ultra-small size of 1. 18*059in greatly reduces the installation space of the receiver and enhances the aesthetics of the model. Ultra-long receiving distance: the receiving distance can reach about 1100 meters above ground, 4000 meters in the air, but the actual control distance is related to the flight environment.

Radiolink Mini PIX Flight Controller FC Speed Controller for FPV Racing Drone/Helicopter/Fixed Wing and More - Receiver built-in gyroscope: supports radiolink AT9, AT10II, AT10, AT9S, the best choice for racing drones. Comes pre-soldered with XT60 Connector and 3. 5mm bullet plugs. 5. 5v/4a ubec very efficient- ESC will power receiver and servos. 4 of each length servo Extension - 16 Extensions In Total. Specifications:connector port: jst gh connectorreceiver In: PPM/SBUS Transmitter: 6 oneshot/PWMUSB Voltage: 5v+-0

3vwork Voltage: 5.

More information about Radiolink


Similar products



Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

Finware - These original nylon xt60 plugs can handle 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. Low battery protection, overheat Protection, Startup Throttle Protection, signal loss Protection, and Abnormal Voltage Protection. Programmable - Programming card or using Transmitter.

Made from high-temp nylon and gold plated bullet connectors, both included in the injection mold at the time when forming the connector. Fit for devo 10/devo 7/jr/futABA Transmitter. Hobbymate xt60-pdb was integrated bec 5v 3a the 12v 05a the output power for quadcopter camera, Receiver, VTX, Led Board and osd.

Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery - Made of 4 layer board, 35mm* 50mm size, can output 4 * 50A current at the same time. 5v output is designed for flight controller, Receiver, VTX, OSD. Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. Silicone wires - made With High Quality 22Awg Wire. Heat shrink 2:1 both red and Black Included - 2 Feet Total.

4 of each length servo Extension - 16 Extensions In Total. Continuous Dischage Rate:8C.

More information about Finware


Similar products