SunFounder Standard Gripper Kit Paw for Robotic Arm Rollarm DIY Robot Arduino Uno Mega 2560 Nano

#ad
SunFounder #ad - Just try it! package included: 1 x set of acrylic plates 2 x sunfounder servo 9g 1 x m3*10+6 single-pass hexagon copper standoff 4 x m2*8 round head phillips screw 4 x m2 nut 1 x M3*8 Round Head Phillips Screw 4 x M3*10 Round Head Phillips Screw 2 x M3*12 Round Head Phillips Screw 2 x M3*20 Round Head Phillips Screw 2 x M3 Nut 7 x M3 Self-locking Nut 1 x 3M Anti-slip Tape 10 x M1.

2*4 self-tapping screw rollpaw is a simple solution for projects requiring small grippers and driven by two servos, it can be used with ease in your projects. Controlled with two servos: one to control the paw to grip and let go, the other to rotate the paw. Maximum opening distance of the jaws: 60mm. Working voltage: 4.

SunFounder Standard Gripper Kit Paw for Robotic Arm Rollarm DIY Robot Arduino Uno Mega 2560 Nano #ad - 8~6v. Provides detailed user manual, code, and assembly and application videos. When the jaws is fully stretched, the maximum distance is 60mm, which means it can grip an object with a 60-mm diameter. The joints of the two jaws are all connected with self-locking nuts, so that they would not fall off easily during the rotating and keep the paw "safe and sound".

Introduction the Rollpaw kit is a simple solution for projects that need small grippers. The rollpaw is easy to assemble and use with the code provided. It is driven by two 9g sunfounder servos: one to control the jaws to open and close, and the other to control the rotating of the paw.

More information about SunFounder #ad

SainSmart 6-Axis Desktop Robotic Arm & Grippers, Assembled for Arduino UNO MEGA2560

#ad
SainSmart #ad - Mg996 55g servo specifications: Size: 407*19. 7*42. 9mm working torque: 9. 4-13kg/cm respond rotation speed: 53-62r/m working temperature: -30~+60°c dead zone: 5us Plug: JR, Tutaba Rotation angle: 180 degree Analog servo Working current: 100mA Working voltage: 5-7. 2v metal gear, coreless motor, two ball bearing Operation speed: 0

17s/60 degree4. 8v; 014s/60 degree6. 0v sg90 9g servo specifications: Size: 23*12. 2*29mm weight: 9g Working torque: 1. 6kg/cm respond rotation speed: 012-013s/60 degree working temperature: -30~+60 c dead zone: 5ms plug: JR, Tutaba Rotation angle: 180 degree Analog servo Working current: 100mA Working voltage: 3.

SainSmart 6-Axis Desktop Robotic Arm & Grippers, Assembled for Arduino UNO MEGA2560 #ad - 5-6v metal gear package list: 4x mg996r servo 2x sG90 servo 1x Structural Frame Bearings All necessary screws Manual: http://wiki. Sainsmart. Com/index. Php/diy_6-axis_servos_control_palletizing_robot_arm_model_for_Arduino_UNO_MEGA2560 NOTE: Mega Board is not Included. A fun stem educational experience in mechanical engineering and electronics.

Simple setup: all the parts are fully assembled, allowing for immediate programming and use.

More information about SainSmart #ad


Similar products



Hiwonder 6 Channel Digital Servo Tester with Over-Current Protection

#ad
Hiwonder SG_B073XZH264_US #ad - There is a small button under each knob of controller, the servo will return to the center of the state, press it, remove the center of the state, the knob can not control the servo rotation; then press it, the knob can continue to control the servo rotation. We provide a lot of source code on our wiki webpage SainSmart Wiki for the Arduino Mega, making this unit suitable for beginners!

Parameter: dimension : 76mm*53mm2. 99in*2. 09in weight: 37g 1. 31oz wiring instruction +: connect 5-8. 4v power supply -:connect the power supply negative the  voltage that the tester require should correspond to the voltage required by a servo that you controlled Package Content: 1 x Servo Tester If you have any questions, please feel free to contact us at [email protected]

Hiwonder 6 Channel Digital Servo Tester with Over-Current Protection #ad - Com, we'll offer help to you asap production quality: structure consists of different thickness of CNC machined PVC plates, making it a durable and quality product guaranteed. A fun stem educational experience in mechanical engineering and electronics. Dimension : 76mm*53mm2. 99in*2. 09in; weight: 37g 1. 31oz.

The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.

More information about Hiwonder SG_B073XZH264_US #ad


Similar products



Seamuing 2Pcs Robotic Claw Gripper Robot Arm Clamp Claw Mechanical Claws for Arduino Compatible with MG995/996

#ad
MakerHawk #ad - Overall length: 108mm when paw closed the longest length. There is a small button under each knob of controller, the servo will return to the center of the state, the knob can not control the servo rotation; then press it, press it, remove the center of the state, the knob can continue to control the servo rotation.

Material: aluminum alloy. Overall width: 98mm maximum overall width when paw is opened. Robotic claw gripper robot arm clamp claw mechanical Claws for Arduino Compatible with MG995/996Specification:Material: aluminum alloyClaw weight: 68g2. 4ozmaximum paw angle: 54mm/2. 13inchmaximum angle does not add the expansion board maximum opening distance 55mm, install the extension board after the maximum is 94mmOverall length: 108mm/4.

Seamuing 2Pcs Robotic Claw Gripper Robot Arm Clamp Claw Mechanical Claws for Arduino Compatible with MG995/996 #ad - 25inch when paw closed the longest length. Overall width: 98mm/3. 86inch maximum overall width when paw is openedpackage Including2 * aluminum alloy Mechanical Gripper Production quality: structure consists of different thickness of CNC machined PVC plates, making it a durable and quality product guaranteed.

Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. Simple setup: all the parts are fully assembled, allowing for immediate programming and use. Stem education: simulate this real palletizing robot arm and learn about the basic construction of a real robot arm.

More information about MakerHawk #ad


Similar products



ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant

#ad
ELEGOO EL-CB-003 #ad - 5 * 2. There is a small button under each knob of controller, the knob can not control the servo rotation; then press it, remove the center of the state, the servo will return to the center of the state, press it, the knob can continue to control the servo rotation. Material: aluminum alloy. Claw weight: 68g not including motor, the kit is very light.

Compatible with Robot MG995 MG996. 1mm dc barrel jack compatible with 5. We have the manufacture factory, making productions and selling by ourselves. Microcontroller: atmega2560 compatible with arduino ide operating voltage: 5v input: voltagerecommended : 7-12v Input Voltage limits : 6-20V Digital I/O Pins: 54 of which 15 provide PWM output Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.

ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant #ad - We'd like to receive your valuable suggestions for our products and make your idea come true. The second one is a not connected pin, that is reserved for future purposes. Stronger reset circuit. 3v. Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. This version is optimized in the original version, mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use.

We provide a lot of source code on our wiki webpage SainSmart Wiki for the Arduino Mega, making this unit suitable for beginners!

More information about ELEGOO EL-CB-003 #ad


Similar products



Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control

#ad
Miuzei #ad - Overall width: 98mm maximum overall width when paw is opened. Use 5. The second one is a not connected pin, that is reserved for future purposes. Stronger reset circuit. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Application fields: remote control helicopters, micro robot, robot arm and boats. Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec. Amplifier type:analog controller Operating voltage: 4. 8v~6. 0v. 5mm dc barrel jack. The main joints utilize metal gear servos MG966R and SG90, ensuring a reliable and smooth operation.

Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control #ad - Motion flexibility: quality servos, precision structure, and 6 axis design allow an immense range of motion and flexibility within its reasonable limits. Programmable: servos are completely programmable using any microcontroller and code. 1mm dc barrel jack compatible with 5. The chip is atmega2560-16au and Atmega16u2, same with the official version.

Improved and expert version: 1.

More information about Miuzei #ad


Similar products



Charmed Labs Pixy2 Smart Vision Sensor - Object Tracking Camera for Arduino, Raspberry Pi, BeagleBone Black

#ad
Charmed Labs PIXY2 #ad - Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally. Robot vision made easy - press the button to teach Pixy2 an object. New with pixy2: line following mode and integrated LED light source!

A multitude of connection options means you can use Pixy with almost any microcontroller. In future, which operate with 5V and with the Due that operate with 3. 1mm dc barrel jack compatible with 5. 3v. The mega is 100% compatible with arduino IDE and most shields designed for the Arduino mega2560 r3,RoHS Compliant.

Charmed Labs Pixy2 Smart Vision Sensor - Object Tracking Camera for Arduino, Raspberry Pi, BeagleBone Black #ad - All kind of r/c Toys and Arduino experiments. It connects directly to arduino with the included cable, and fully supports Raspberry Pi and BeagleBone Black with included software libraries. Overall width: 98mm maximum overall width when paw is opened. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, shields will be compatible both with the board that use the AVR, the IOREF that allow the shields to adapt to the voltage provided from the board.

Also included in the box is a USB cable, and mounting hardware to attach Pixy to your robot creation. 5 * 2. Simple setup: all the parts are fully assembled, allowing for immediate programming and use.

More information about Charmed Labs PIXY2 #ad


Similar products



SunFounder Mega 2560 R3 ATmega2560-16AU Board Compatible with Arduino

#ad
SunFounder AMAT0008 #ad - The voltage that the controller require should correspond to the voltage required by a servo that you controlled. Maximum paw angle: 54mm maximum angle does not add the expansion board maximum opening distance 55mm, install the extension board after the maximum is 94mm. In future, which operate with 5V and with the Due that operate with 3.

All kind of r/c Toys and Arduino experiments. Please note: the starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally. Robot vision made easy - press the button to teach Pixy2 an object. New with pixy2: line following mode and integrated LED light source!

SunFounder Mega 2560 R3 ATmega2560-16AU Board Compatible with Arduino #ad - Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec. No load running Speed: 009±001 sec/60° at 4. 8v rotary angle: 120°. 5 * 2. Overall width: 98mm maximum overall width when paw is opened.

More information about SunFounder AMAT0008 #ad


Similar products



ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant

#ad
ELEGOO EL-CB-001 #ad - 5 * 2. We provide a lot of source code on our wiki webpage SainSmart Wiki for the Arduino Mega, making this unit suitable for beginners! Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. Overall length: 108mm when paw closed the longest length. No load running Speed: 0

09±001 sec/60° at 4. 8v rotary angle: 120°. The mega 2560 r3 board is 100% compatible with Arduino. A fun stem educational experience in mechanical engineering and electronics. Dimension : 76mm*53mm2. 99in*2. 09in; weight: 37g 1. 31oz. The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1.

ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant #ad - We have the manufacture factory, making productions and selling by ourselves. Powered via the usb connection or with an external power supply. Simplify your programming - receive just the objects you're interested in. Use whatever controller you want - includes software libraries for Arduino, Raspberry Pi, and BeagleBone Black.

More information about ELEGOO EL-CB-001 #ad


Similar products



SainSmart Sensor Shield Digital Analog Module V4 for Arduino Duemilanove UNO Mega2560 ATMEL

#ad
SainStore Inc. 101-50-107 #ad - Simple setup: all the parts are fully assembled, allowing for immediate programming and use. Stem education: simulate this real palletizing robot arm and learn about the basic construction of a real robot arm. The power source is selected automatically. The atmega2560-16au has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library.

Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. Faster transfer rates and more memory. Control using atmel atmega328p chipthe same with Arduino UNO R3. Buckled communication Port:Selectable between I2C and UART. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.

SainSmart Sensor Shield Digital Analog Module V4 for Arduino Duemilanove UNO Mega2560 ATMEL #ad - Technical details* operating voltage: 5vdc* input voltage recommended: 7-12vdc* input voltage limits: 6-20VDC* Buckled Analog Port:Handy, solid connection to 6 Analog inputs with VCC/GND* Digital IO port:13 ports prepared to digital modules or servos* Analog IO Port:2. 54 grid male pin header connections* buckled communication port:selectable between I2C and UARTPackage Content1x SainSmart Sensor Shield V4 Production quality: structure consists of different thickness of CNC machined PVC plates, making it a durable and quality product guaranteed.

The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1.

More information about SainStore Inc. 101-50-107 #ad


Similar products



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
Elegoo EL-CP-004 #ad - Stall torque 4. 8v: 17. 5oz /in 1kg/cm Dead band width: 7usec. No load running Speed: 009±001 sec/60° at 4. 8v rotary angle: 120°. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Application fields: remote control helicopters, micro robot, robot arm and boats.

The power source is selected automatically. The atmega2560-16au has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library. Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - 1mm dc barrel jack compatible with 5. It communicates using the original STK500 protocol reference, C header files. This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use. New improvement: clear prints on the female header connector, more precise and easier to use the wire.

The elegoo uno r3 board now uses an atmega16u2 instead of the ATMega8U2 chip. The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1.

More information about Elegoo EL-CP-004 #ad


Similar products