Team Blacksheep TBS Battery Anti-Slip Pad 3pcs

#ad
Team BlackSheep #ad - Team BlackSheep. Super grippy, sticky battery pads for different size quads cut to your own size. Battery-anti-slip-pad-3pcs. Specificationsize lwh: 100 x 50 x 3 mmgrippiness: super incLUDES3 x Anti-slip battery pads of identical size with double-sided stickytape backing.

More information about Team BlackSheep #ad

MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle

#ad
MG Chemicals 422B-55ML #ad - Ideal for high temperature environments. It is essential that surfaces be free of any trace of grease or organic substances. Rohs compliant. No. Thinner Cleaner. Curing may be accelerated by applying moderate heat with either a convection oven or infrared lamps. At room temperature, the product will tack free in approximately 5-7 minutes, and full cure will be achieved in approximately 48 hours.

Fluoresces under UV-A light blacklight. Heat curing will improve the physical strength of this coating. We recommend curing in a convection oven at 65 degree C for one hour, but other temperature and time combinations can work well. Best results will be obtained by applying to thoroughly cleaned and dried parts or materials.

MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle #ad - Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. For spraying, liquid can be thinned using M. G. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. 8309 liquid or 8310A Gel stripper formulations. Easy rework and repairs: solder through the coating or remove with MG Cat.

Maximum constant service temperature of 200 °C 392 °F.

More information about MG Chemicals 422B-55ML #ad


Similar products



iFlight 10pcs RC LiPo Battery Straps 10x100mm Hook and Loop Reusable Fastening Cable Ties for 1-3S Micro Brushless FPV Racing Drone Quadcopter

#ad
iFlight #ad - Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. Fluoresces under UV-A light blacklight. Micro battery strap perfect for 1-3S tiny whoop brushless FPV racing drone. Each fastening tie is 100mm in length and 10mm in width. 8309 liquid or 8310A Gel stripper formulations. Iflight 10x100mm battery straps Specs:Length:10x100mmColor: blackWeight: around 0

4g/pcmaterial: soft nylon materialfeatures:easier to tight your batteriessuper lighter, Higher strength, much more durable, non-slip and useful strapsIt fits for most 1-3s lipo batteriesPerfect for the most brushless tiny whoop dronesPackage included:10pcs x 10x100mm micro battery strap Certified ul 94 v-0 file# E203094.

iFlight 10pcs RC LiPo Battery Straps 10x100mm Hook and Loop Reusable Fastening Cable Ties for 1-3S Micro Brushless FPV Racing Drone Quadcopter #ad - . Easy rework and repairs: solder through the coating or remove with MG Cat. Strong self gripping which can ensure the lipo won't slip out, easy to use. Maximum constant service temperature of 200 °C 392 °F. No. They also can be used to organize cables, and wires, cords, ideal for keeping all kinds of cords cables well organized and tidy in place.

Include an eye hole in the tail allowing the tie to be attached to a cable or hung from a hook. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage.

More information about iFlight #ad


Similar products



FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone

#ad
FrSky #ad - Maximum constant service temperature of 200 °C 392 °F. Made from nylon fabric material with hook & loop attachments, these battery straps are both reusable and durable. Providing outstanding customer service is our number one priority. Each fastening tie is 100mm in length and 10mm in width. No. Include an eye hole in the tail allowing the tie to be attached to a cable or hung from a hook.

Micro battery strap perfect for 1-3S tiny whoop brushless FPV racing drone. 8309 liquid or 8310A Gel stripper formulations. Specifications Dimension: 16*11*5. 4mm l*w*h weight: 1. 5g number of channels: 16ch 1-16ch from sbus channel, 1~8ch from cppm channel operating voltage Range: 4~10V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Certified ul 94 v-0 file# E203094.

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone #ad - Frsky ultra mini receiver R-XSR is the evolution of FrSky full range XSR receiver. Strong self gripping which can ensure the lipo won't slip out, easy to use. Supports redundancy function Support telemetry and Smart Port enabled. The r-xsr is a standalone receiver with all the functions of XSR, in addition, it's almost 1/3 size and 1/3 weight of XSR receiver.

Us-based customer service & technical support - should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST.

More information about FrSky #ad


Similar products



Ovonic 14.8V 1550mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY Parts

#ad
Emate #ad - Certified ul 94 v-0 file# E203094. Micro battery strap perfect for 1-3S tiny whoop brushless FPV racing drone. Strong self gripping which can ensure the lipo won't slip out, easy to use. Specification: brand: ovonic Chemistry: Li-polymerCell Number: 4S VoltageV: 14. 8v capacitymah: 1550mah discharge rate: 100c charge Plug: JST-XH Discharge Plug: XT60 ConnectorNet Weightdev.

20g: 192g battery dimension: 69x32x36mm compatible for: specially designed for nemesis 240 mini, flip fpv 260h mini, tweaker 180 micro quad, rc car, rc airplane, danaus, FLIP FPV 250S MINI, RC Truck, Drone, LRC Freestyle V1270-296, Remote Control, RC Boat, RC Helicopter, MXP180 FPV Quadcopter, Vortex, FPV.

Ovonic 14.8V 1550mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY Parts #ad - 8309 liquid or 8310A Gel stripper formulations. Maximum constant service temperature of 200 °C 392 °F. No. Voltage note: please check whether the battery surface is alright when you get it and whether the voltage is between 3. 7~4. 2v before using. Switchable sbuS/ CPPM signal output. Application: nemesis 240 mini, danaus, flip fpv 260h mini, flip fpv 250s mini, dimension and the plug match, LRC Freestyle V1270-296, tweaker 180 Micro Quad, mxp180 fpv quadcopter, Vortex, drone and FPV Only if the voltage, then it will fit.

What you get: ovonic 4s 14.

More information about Emate #ad


Similar products



iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 smaller IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller pack of 20pcs

#ad
iFlight #ad - Easy rework and repairs: solder through the coating or remove with MG Cat. 8309 liquid or 8310A Gel stripper formulations. They also can be used to organize cables, and wires, cords, ideal for keeping all kinds of cords cables well organized and tidy in place. Ultra mini size and light weight. No. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK.

Maximum constant service temperature of 200 °C 392 °F. Supports redundancy function Support telemetry and Smart Port enabled. 2. 4g receiver antenna with IPEX 4 Generation connector. 2. 4g remote control, surveillance, rc model, bluetooth and other antennas Use: Vehicles and Remote Control Toys This is specially designed for Frsky X4RSB, S6R, XM, XM+ Receiver, receivers, XMPF3E Flight Controller.

iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 smaller IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller pack of 20pcs #ad - Made from nylon fabric material with hook & loop attachments, these battery straps are both reusable and durable. 5. 9 inch 150mm - length, rF113 Silver plated Wire Material. Micro battery strap perfect for 1-3S tiny whoop brushless FPV racing drone. Voltage note: please check whether the battery surface is alright when you get it and whether the voltage is between 3.

More information about iFlight #ad


Similar products



16pcs HQProp 3x4x3 Tri-Blade Propeller 3 inch Props for RC FPV Drone Quadcopter Purple & Black

#ad
HQProp #ad - 2. 4g receiver antenna with IPEX 4 Generation connector. Strong self gripping which can ensure the lipo won't slip out, easy to use. Ipex connector, replaceable antennas. 8309 liquid or 8310A Gel stripper formulations. Micro battery strap perfect for 1-3S tiny whoop brushless FPV racing drone. Made from nylon fabric material with hook & loop attachments, these battery straps are both reusable and durable.

They also can be used to organize cables, and wires, cords, ideal for keeping all kinds of cords cables well organized and tidy in place. Ultra mini size and light weight. Smaller ipex connector type fit for new FRSKY X4R-SB frsky xm mini receivers. Pack of 16pcs hqprop 3 inch propeller 8pcs clear purple and 8pcs clear black.

16pcs HQProp 3x4x3 Tri-Blade Propeller 3 inch Props for RC FPV Drone Quadcopter Purple & Black #ad - 16pcs hqprop 3x4x3 tri-blade propeller 3 inch propsDescription:Brand name: HQPropSize: 3x4x3 inchMaterial: polycarbonateWeight: 1. 5g each mounting hole: 5mmcenter hub thickness: 5mmcolor: clear purple, clear blackPackage included: 8pcs HQ Prop 3x4x3 3-Blade Propeller clear black 8pcs HQ Prop 3x4x3 3-Blade Propeller clear purple Certified ul 94 v-0 file# E203094.

Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Each fastening tie is 100mm in length and 10mm in width. Easy rework and repairs: solder through the coating or remove with MG Cat.

More information about HQProp #ad


Similar products



35V 1000uf Ultra Low ESR - 6 pcs Panasonic FM Series Capacitors

#ad
Panasonic Panasonic FM Series #ad - Manufactured within a year. 5. 9 inch 150mm - length, rF113 Silver plated Wire Material. Dimension: 2. 7*1. 26*1. 4inch 69*32*36mm; Net weight: 6. 79oz/pc192g. 2. 4g receiver antenna with IPEX 4 Generation connector. Mounting hole: 5mm; size: 3x4x3 inch, weight: 1. 5geach. Endurance : 105 °c 5000 h to 10000 h. 100% authentic Panasonic made.

Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Pack of 16pcs hqprop 3 inch propeller 8pcs clear purple and 8pcs clear black. Ipex connector, replaceable antennas. Switchable sbuS/ CPPM signal output. Maximum constant service temperature of 200 °C 392 °F.

35V 1000uf Ultra Low ESR - 6 pcs Panasonic FM Series Capacitors #ad - Made with high quality poly carbonate material for maximum performance. Application: nemesis 240 mini, flip fpv 250s mini, tweaker 180 micro quad, drone and fpv only if the voltage, danaus, mxp180 fpv quadcopter, flip fpv 260h mini, dimension and the plug match, LRC Freestyle V1270-296, Vortex, then it will fit.

What you get: ovonic 4s 14. 8v 1550mah 100c xt60 Plug lipo battery. 6 pcs panasonic fm series electrolytic capacitors35v 1000uflow impedance ultra low esr, same as FR Series 40 % to 70 % less than FC Series 12mm x 25mm x 5mmlead spacing Certified ul 94 v-0 file# E203094.

More information about Panasonic Panasonic FM Series #ad


Similar products



TATTU 2500mAh 2S 7.4v Fatshark Goggles Headset LiPo Battery Pack with DC3.5mm Plug and LED Power Indicator

#ad
Tattu TA-2500-2S1P-fatshark-goggles #ad - Easy rework and repairs: solder through the coating or remove with MG Cat. 2. Energy density:special adapted to each UAV type and RC car/boat/heli type. 100% authentic Panasonic made. Each fastening tie is 100mm in length and 10mm in width. Fluoresces under UV-A light blacklight. Parameter: weight, 102g; dimensionl*w*h, 73.

TATTU 2500mAh 2S 7.4v Fatshark Goggles Headset LiPo Battery Pack with DC3.5mm Plug and LED Power Indicator #ad - 7*38. 1*18. 6mm; connector, DC3. 5mm. Applications: special designed for Fatshark Goggles. What you get: tattu liPo Battery Pack with DC3. 5mm Plug. High capacity for long flights, Extra lead for powering headset fat plate. Made with high quality poly carbonate material for maximum performance. 5. 9 inch 150mm - length, rF113 Silver plated Wire Material.

Include an eye hole in the tail allowing the tie to be attached to a cable or hung from a hook. 2. 4g receiver antenna with IPEX 4 Generation connector. 3.

More information about Tattu TA-2500-2S1P-fatshark-goggles #ad


Similar products



iFlight 5pcs RC LiPo Battery Straps 10x130mm Rubberized Straps Non-Slip for Tiny Whoop Quadcopters Indoor Micro FPV Racing Drone Red

#ad
iFlight #ad - High capacity for long flights, Extra lead for powering headset fat plate. Us-based customer service & technical support - should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST.

5. 9 inch 150mm - length, rF113 Silver plated Wire Material. Easy rework and repairs: solder through the coating or remove with MG Cat. Panasonic FM Series. Dimension: 2. 7*1. 26*1. 4inch 69*32*36mm; Net weight: 6. 79oz/pc192g. Micro battery strap perfect for 1-3S tiny whoop brushless FPV racing drone. In our opinion, these are by far the best performing lipo straps that secure your lipo and enable a quick lipo change.

iFlight 5pcs RC LiPo Battery Straps 10x130mm Rubberized Straps Non-Slip for Tiny Whoop Quadcopters Indoor Micro FPV Racing Drone Red #ad - These "small" size straps are 130mm long and 10mm wide description:Brand Name: iFlightItem Name: lipo battery strapLength: 130mmWidth: 10mmPackage Included:5pcs x fpv micro quad battery strapNote:battery and other parts are not included. Supports redundancy function Support telemetry and Smart Port enabled.

Strong self gripping which can ensure the lipo won't slip out, easy to use. Led indicator shows remaining voltage.

More information about iFlight #ad


Similar products



Universal Super Sticky Battery Pad - Rotor Riot UMMAGRIP

#ad
Rotor Riot #ad - Keep your gear in check with the Ummagrip Battery Pad made by pilot Ummagawd. Maximum constant service temperature of 200 °C 392 °F. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Hq durable prop more power, responsiveness, efficiency, and durability than most.

3 inch props suit for 100-150mm FPV Racing Drone Frame. This battery strap is rubberized on the side facing the lipo which ensures the lipo can't slip out. Easy rework and repairs: solder through the coating or remove with MG Cat. Precision machining, Low loss signal stability, High sensitivity, High quality.

Universal Super Sticky Battery Pad - Rotor Riot UMMAGRIP #ad - A must have for frsky XM+ and X4R rx/tx field repair. Originally made for the remix frame, this pad is now available to everyone! Simply cut it to the size that you need and peel the 3M adhesive to stick on your quad. 5. 9 inch 150mm - length, rF113 Silver plated Wire Material. No. Led indicator shows remaining voltage.

Manufactured within a year. Include an eye hole in the tail allowing the tie to be attached to a cable or hung from a hook.

More information about Rotor Riot #ad


Similar products