Top 10 Coil Spring Compressor Tool – Suspension Tools

As an Amazon Associate I earn from qualifying purchases.

1. ABN

#ad

13/16in Socket 1/2in Drive, ABN 11.5in Strut Spring Compressor Tool – Set of 2 Pair – Macpherson Spring Compression

#ad
ABN #ad - Easy to use: use the abn 11. 5” inch strut spring compressor tool – set of 2 pair – macpherson spring compression, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, strut tubes, tighten, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, and remove the strut; Lubricate threads with anti-seize compound for prolonged life.

Built to last: constructed with forged hooks and center screw hardened for maximum strength and longevity; Designed to withstand extreme pressure in any environment; For professional use. Locks into place: acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.

Easy storage: heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Wide range of compatibility: universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut; Hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool; 11. 5-inch threaded rods for 10-inch to 105-inch maximum opening to fit jaws to coils Wide jaws with standard diameter of approximately 6 inches OD front coil springs.
BrandABN #ad
ManufacturerABN #ad
Height1.2 Inches
Length0.3 Inches
Weight8 Pounds
Width1.2 Inches
Part Number9210
ModelABN 9210

2. Shankly

#ad

2 Steel Jaw Claws to Wrap Coil Spring Safely, 370mm Drop Forged Coil Spring Compressor

#ad
Shankly #ad - Versatile fit: works well with springs between 90-370mm. Drop forged cr-v steel: shankly’s coil spring compressor tool is built with heat treated, high quality CR-V steel to ensure you obtain a professional job performance every time.

Maximum jaw opening is 370mm. Strong grip: this spring coil compressor features specially crafted claws which enhance safety by wrapping around coils for a sure grip. Limited space, no problem: Shankly’s coil spring compressor kit is designed for use in limited space under the wheel arch. One year warranty: actions speak louder than words. We are so confident in this heavy duty coil spring compressor that it’s backed by a one year manufacturer's warranty.
BrandShankly #ad
ManufacturerShankly #ad
Part NumberVT01031B
Model4350275409

3. CARTMAN

#ad

3/4in Socket 1/2in Drive, CARTMAN 11.5in Strut Spring Compressor Tool – Set of 2 Pair – Macpherson Spring Compression

#ad
CARTMAN #ad - This tools strut spring Compressor quickly and safely compresses the spring for easy. The broad spring contact and built in detent pins help to lock the spring into place for safer. The hooks are forged and the center screw is hardened for long life. Replacement of the strut cartridge or strut assembly repair. This item is designed to compress many MacPherson Strut Spring sizes.
BrandCARTMAN #ad
ManufacturerCartman #ad
Part NumberCM-MS-1612
Model10

4. OEM TOOLS

#ad

OEMTOOLS 27036 MacPherson 10.75 Inch Strut Spring Compressor | Set of 2 Universal Spring Compression Tools | 9.75 Inch Maximum Safe Opening | Easy to Use Suspension Tool

#ad
OEM TOOLS #ad - Allows quick compression of the coil spring to replace the shock absorber or spring. Detent pins provide for safety. Easy to use. Broad spring contact and built in detent pins help to lock the spring into place for safer spring compression. Note: lubricate the threads of this tool with anti-seize compound to prolong the life of the center screw. Hooks are forged and the center screw is hardened for long life. Comes in Sturdy blow-molded case.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height2.3 Inches
Length13.4 Inches
Width8 Inches
Part Number27036
Model27036
WarrantyOEMTOOLS Limited Lifetime

5. SURGEDO

#ad

SURGEDO Coil Spring Compressor Remover Installer Tool Kit, 1/2in Drive Internal Strut Compressor Tool, Heavy Duty Steel Hook to Hold Auto Car Spring Safely

#ad
SURGEDO #ad - Wide compatibility: the strut spring compressor is used for the repair and replacement of shock absorbance, struts and springs. Thickened thread design to ensure durable and strength. Using it to remove and install automotive coil springs up to 5-5/8”O.

D, designed to grasp a maximum 3/4” wire diameter spring. The coil compressor hook holds the spring tightly by rotating the easy-to-use hex nut. Easy to use: 1/2" drive compression disc spring to replace shock absorber unit or spring. Strength and durability: forged structures allow for repair of bent struts, strut tubes and damaged parts. Please use anti-sticking agent to lubricate the thread and prolong the service life.

Durable steel hooks: this spring compressor tool has a special claw-like claw that is wound around the coil to ensure firm grip and improve safety. Unique design: internal compressor adopts inner coil spring for easy disassemble, it is more efficient than traditional two pieces spring compressors. It is suitable for any 7/8" hand socket wrench or high torque impact wrench, you can easy to twist the spring compressor.
BrandSURGEDO #ad
ManufacturerSURGEDO #ad
Weight1.94 Pounds

6. OEM TOOLS

#ad

OEMTOOLS 27035 Coil Spring Compressor

#ad
OEM TOOLS #ad - Slide hammer is required for use with oem #27032 Axle Puller, OEM #27049 Pilot Bearing Puller. Slide hammer is required for use with oem #27129 Rear Axle Bearing Puller, OEM #27184 2/3 Jaw Puller. Aid in the Installation of Coil Spring. Comes in sturdy Blow-mold Storage Case.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height2.6 Inches
Length13.4 Inches
Weight6 Pounds
Width8 Inches
Part Number27035
Model27035
WarrantyOEMTOOLS Limited Lifetime

7. 8MILELAKE

#ad

8MILELAKE Macpherson Strut Spring Compressor Interchangeable Fork Coil Extractor Set

#ad
8MILELAKE #ad - No impact wrench! Hand ratchet only. Sgs test report: the max force 4487 KG. Includes three sets of jaws: 2 each of, 65-125mm, 88-160mm and 126-212mm. The coil spring compressors are manufactured under very strict quality control and are approved to endure extremely high loads. Compresses all types of MacPherson style coil springs front and rear. Professional multi Use MacPherson Interchangeable Fork Spring Compressor Set.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height0.59 Inches
Length2.17 Inches
Weight19.84 Pounds
Width0.98 Inches
Part NumberSZ
ModelSpring Tool

8. Hiltex

#ad

Auto Suspension Remover and Installer Kit, Heat-Treated Steel | Strut, Hiltex 50604 10" Coil Spring Compressors | Hardened

#ad
Hiltex #ad - Compressors fit most strut sizes on domestic and import vehicles and can be used on other types of strut springs. Bolts are made with a hardened and tempered, precision-machined steel with a black oxide finish that prevents corrosion and rust. Compressor jaws are made with drop forged, heat treated steel with chrome plating for high strength and durability. Compressors are designed to maintain and preserve spring curvature while compressing. Permits quick and safe removal or installation of springs while repairing struts; Minimum tensile strength of bolts and 105, 000 PSI.
BrandHiltex #ad
ManufacturerRidgerock Tools Inc. #ad
Height10 Inches
Length3.75 Inches
Width2.75 Inches
Part Number50604
Model50604

9. OEM TOOLS

#ad

OEMTOOLS 27200 Coil Spring Compressor | Compress Coil Springs on All Passenger Trucks & Autos | Safety Tool for Installing & Removing Coil Springs | Fits Most MacPherson Strut Springs & Coil Springs.

#ad
OEM TOOLS #ad - Protection: if something happens to your strut coil spring compressor during normal, everyday use, then don’t stress. Easy removal and installation: this spring compressor quickly and easily compresses most MacPherson strut springs and coil springs.

See the product manual for full instructions and listings. With sliding locks on the case, your compressor isn’t going anywhere. Sturdy locking: our compressor tools feature built-in detent latches to help lock coil in place. The accompanying safety gauge helps you to test if this tool is right for your coil. Durable materials: this coil tool features forged construction for strength and durability.

The top-quality steel will enable long usage and keeping your coil in place. Convenient storage: this coil spring compressor tool comes with a vibrant red carrying case. This product is covered by the OEMTOOLS Limited Lifetime. However, you can take it anywhere with the travel handle and lightweight design.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height1.8 Inches
Length13.1 Inches
Weight3.95 Pounds
Width9.3 Inches
Part Number27200
Model27200
WarrantyOEMTOOLS Limited Lifetime

10. Shankly

#ad

Universal, Spring Compression Tool, Shankly Coil Spring Compressor Tool 2 Pieces

#ad
Shankly #ad - Dimensions: this coil spring compressor tool has an operating capacity of 300 mm and overall length of 300 mm. Shankly’s strut spring compressor features double ended jaws with attachable security hooks for added safety and control.

Versatile tool: shankly’s strut compressor works as a spring compressor for struts and other coil springs on most passenger and light commercial vehicles, providing the mechanic a versatile compressor solution. Strong and durable: shankly’s coil spring compressor has a drop forged enamel body and is composed of top quality materials, giving the mechanic confidence spring compressor jobs will be done right.

Easy to use: shankly’s spring strut compressor is simple to operate, allowing the mechanic to get the job done right and then move on. Makes spring compression safer: compressing struts and springs can be dangerous. 10 inch bolt provides max height of removable spring at 9 ½ inches.
BrandShankly #ad
ManufacturerShankly #ad
Part NumberB1008
Model8542035204