Top 10 Exhaust Tips 2.5 Inlet 5 Outlet – Automotive Replacement Exhaust Pipes

As an Amazon Associate I earn from qualifying purchases.

1. WESDON

#ad

Exhaust Tip 5.00" Dia X 12.00" Long 2.50" Inlet Bolt On Rolled Slant Polished Stainless Steel W50012-250-BOSS-RS Wesdon Exhaust Tip

#ad
WESDON #ad - Bolt on style fits a Exhaust Pipe 2. 50 inlet. Slant angle Round Edge. Polished to Mirror Finish Stainless Steel. 2. 50 inch inlet 5. 00 inch dia 12. 00 in long rolled Slant Bolt On Exhaust Tip. 5. 00 inch diameter 12. 00 inches Long.
BrandWESDON #ad
ManufacturerWesdon #ad
Height5 Inches
Length12 Inches
Width5 Inches
Part NumberW50012-250-BOSS-RS

2. AUTOSAVER88

#ad

Black Paint Finish Stainless Steel Material, 9" Length, 4" Outlet, AUTOSAVER88 2.5 Inch Inside Diameter Exhaust Tip, Bolt-On Installation Design, 2 1/2" Inlet

#ad
AUTOSAVER88 #ad - Bolt-on design easily fastens to the exhaust pipe after tightening screws. Notice: please measure the outlet diameter of your pipe prior to purchase of this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 2.

5 inches. Protects your exhaust pipe from sunlight and rain to prevent rusting and deformation. Made from stainless steel and black paint coating to provide a sleek look to your car exhaust. Universally compatible with vehicles that have exhaust pipes with an outlet diameter of 2. 5 inches. Standard 2. 5" x 4" x 9" inlet, outlet, and overall length respectively.
BrandAUTOSAVER88 #ad
ManufacturerAUTOSAVER88 #ad
Part NumberEXT059

3. GPRO PERFORMANCE

#ad

GPRO PERFORMANCE Diesel TRUCK/SUV/Muscle car Stainless Black Bolt-On Angled Rolled Exhaust Tip 2.5” IN/ 5” OUT /12”OL

#ad
GPRO PERFORMANCE #ad - 2. 5”inlet / 5”outlet / 12” Overall Length. Matte black Powder Coated. Easy bolt-On. Stainless Steel #304.
BrandGPRO PERFORMANCE #ad
ManufacturerGPRO PERFORMANCE #ad
Part NumberGPT255012RACBK

4. LCGP

#ad

Bolt On Stainless Steel Polished Exhaust Tail Pipe, Exhaust Tip 3" Inlet 5" Outlet 12" Overall Length

#ad
LCGP #ad - There are a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust. Easy to install: bolt on installation, not easy to screw off. Note: if you think it isn’t tight enough, additional welding will be a nice safeguard. Made of high quality Stainless steel with strong anti-corrosive, Never Rusty. Polished surface treatment and Rolled Edge & Angled Cut design. 3 inch inside diameter inlet, 5 inch outside diameter outlet, 12 inch overall length.
BrandLCGP #ad
ManufacturerLCGP #ad
Height5.2 Inches
Length12.2 Inches
Width5.2 Inches
Part Number305012RACB

5. Upower

#ad

Upower 2.5 Inch Inlet 4 Inch Outlet Exhaust Tip 2 1/2" to 4" Blue Burnt Exhaust Tailpipe 9" Long Double Wall Straight Cut 304 SS Weld On Pack of 2

#ad
Upower #ad - Before to buy, please make sure the Brand Logo "Upower". Pack of 2 blue exhaust tips; Professional installation is highly recommended; No instruction included. Weld on installation and Double Wall Straight Cut design. There is 1 year warranty for each purchase. Fits: to ensure proper fit make sure your exhaust INLET diameter is 2. 5 inch. Materials: vacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
BrandUpower #ad
ManufacturerPartsSquare #ad
Height4.72 Inches
Length10.24 Inches
Width9.06 Inches
Part Number184287
Warranty1 Year

6. LCGP

#ad

LCGP 2.5" to 4" Diesel Exhaust Tip, Double Wall Design, 5" Overall Length

#ad
LCGP #ad - Tip style: angled cut - rolled Edge, Surface Finished : Polished. 2. 5" inlet 4" outlet ; 5" Overall Length Diesel Exhaust Tip. Professional installation is recommended. Made of high quality T304 stainless steel for long-lasting durability. Installation type: Weld-on. Protect your original pipe from the sun and rain, avoid rusting and deformation.
BrandLCGP #ad
ManufacturerLCGP #ad
Height4 Inches
Length5.5 Inches
Width4 Inches
Part Number254005DAC

7. RP Remarkable Power

#ad

2.5" Inlet 4" Outlet 12" Long Stainless Steel Rolled Edge Exhaust Tip EXT09, RP Remarkable Power

#ad
RP Remarkable Power #ad - Function: exhaust waste gas, Reduce Pressure and Noise, Filter the waste gas to reduce pollution. Important note: installation instruction is not included, professional help in installation may be needed.

Size: 2. 5 inch inlet, 12 inch overall lehgth, 4 inch outlet, 100% Brand New Exhaust Tip. Installation style: weld on design, rolled edge. Note: if you think it isn’t tight enough, Angled Cut 20 degree, Single Layer, additional welding will be a nice safeguard. Material: made by high quality stainless steel, polish stainless surface, light weight, heat-resisting, anti-corrosion and decorate appearance.
BrandRP Remarkable Power #ad
ManufacturerMotorDexon #ad
Part NumberRP_EXT09_G1

8. Upower

#ad

Upower Pack of 2 Exhaust Tip 2.5 inch Inlet 4 inch Outlet 9" Long 304 Stainless Steel 2.5" to 4" Diesel Exhaust Tailpipe Tip Double Wall Slant Cut

#ad
Upower #ad - Weld on installation and Double Wall Slant design. Fits: to ensure proper fit make sure your exhaust INLET diameter is 2. 5 inch. There is 1 year warranty for each purchase. Materials: made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. Pack of 2 exhaust tips; Professional installation is highly recommended; No instruction included. Before to buy, please make sure the Brand Logo "Upower".
BrandUpower #ad
ManufacturerPartsSquare #ad
Height4.72 Inches
Length10.24 Inches
Width9.06 Inches
Part Number184290
Warranty1 Year

9. MONOKING

#ad

2.5" Inlet Black Exhaust Tip,MONOKING Universal Bolt On Exhaust Tips for Truck Car Tailpipes 2.5" Inlet 5.5" x 3" Outlet 9" Long

#ad
MONOKING #ad - Package content - package comes with 1x Exhaust Tip. We provide 1 years warranty and lifetime professional tech support for customers. Please measure outer diameter of your tailpipe before purchasing to make sure vehicle has enough space to install.

Solid black powder coated to high temperature resistance, not easy to fall off. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench. If you think it isn’t tight enough, additional welding will be a nice safeguard. Bolt on install - easy install, holds up long time. 2. 5'' id exhaust tip - only fit 2.

5'' outer diameter tailpipe. Durable material- made from strong 304 stainless steel to avoid rusting and deformation. 2. 5" inlet diameter, 5. 5" x 3" outlet diameter, 9" overall length. Distinctive style - 20 degree of the angle end, slant cut design improved the overall style and appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
BrandMONOKING #ad
ManufacturerMONOKING #ad
Part NumberET2020BOBK25-02

10. WESDON

#ad

Exhaust Tip 5.00" Diameter X 18.00" Long 2.50" Inlet Slant Angle Cut Chrome Plated W50018-250-ACPS Wesdon Exhaust Tip

#ad
WESDON #ad - Weld on Style. Polished Nickel Chrome Plated. Fits a 2. 50 exhaust pipe 2. 50 inlet 5. 00 inch Outlet. Slant Angle Cut. 5. 00 diameter 18. 00 long.
BrandWESDON #ad
ManufacturerWesdon #ad
Height5 Inches
Length18 Inches
Weight7 Pounds
Width5 Inches
Part NumberW50018-250-ACPS
ModelW50018-250-ACPS