As an Amazon Associate I earn from qualifying purchases.
Siphon based pump system. Molded from durable, high-density polyethylene. Sport type: boating. 10' hose with hanger for easy storage. Use on light commercial equipment, landscape crews, farms, dockside and cottage applications.
Wheeled for easy transportation, high density polypropelyne for dent, corrosion and rust resistance. 14 gallon portable fuel container. Hand pump allows you to eliminate spillage and overfills by stopping and restarting the flow of fuel when needed. Comes with maxflo siphon pump with at-the-handle pump control allows for auto-shut-off and restarts and clean, hassle-free siphon control.

Tank built-in fittings: two 1. 5" female npt fitting - fitting is sealed and water-tight, to use remove membrane with razor knife TWO. 5" female npt fitting - fitting is open do noT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
65 gallon fresh or gray water holding tank manufactured by class a Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage. Due to the manufacturing process +/-. 25" on each measurement. Class a customs manufactures this item in the USA in Elkhart, concession trailers, off-road vehicles, Indiana. Non-pressurized tank: tank must be vented allowing air in and out during use. Water tank measurements: 44.


Tanks are made in a warehouse clean each tank prior to use to remove any debris, hot dog carts, pop-up camper, smaller food vendors and portable hand washing sinks.
Tank built-in fittings: two 1. 5" female npt fitting - fitting is sealed and water-tight, to use remove membrane with razor knife TWO. 5" female npt fitting - fitting is open do noT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings. For filling tank it is recommended to use a fill dish or other gravity process. 75 gallon fresh or gray water holding tank manufactured by class a Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.

Impressive brightness: the 3pcs light strip includes 270 pcs 5050-SMD LED chips, outputs a 3900LLM 6000K super bright white light to light up your entire truck bed. You can also add on the included mounting hardware for extra security. Quick installation: peel and stick, the self-adhesive tape with tough-as nail adhesive enhancer for strong sticking.





Plasticweld can withstand continuous temperatures Up To 250Of 121Oc And Intermittent Temperatures Up To 300Of 148Oc When Fully Cured. Cure and set time: after kneading the two part formula together by hand, plasticweld Takes 25 Minutes To Set And Cures In 3 Hours.
Bonds instantly. Applications: abs, marine repairs & fiberglass parts, Auto Bumpers And Trim, plastic water tanks, Vinyl Surfaces And Siding, pvc & cpvc pipes and Plastics, And Plumbing. Will not shrink or pull away. J-b weld plasticweld is designed for diy plastic repairs on abs, pvc & cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water. Superior strength.
1. Scepter
#ad
Scepter USA 6792 Duramax 14 Gallon Flo-N-Go Fuel Caddy, Red
#adScepter #ad - 10 foot hose with two shut-off valves, at both the thank and the hose connector make the hoes easy to disconnect for refilling and transportation. Ideal for industrial, commercial and recreational applications.Siphon based pump system. Molded from durable, high-density polyethylene. Sport type: boating. 10' hose with hanger for easy storage. Use on light commercial equipment, landscape crews, farms, dockside and cottage applications.
More information #ad
One person can indeed roll it, however when unit is full it requires 2 people to lift it into vehicle as it weighs approximately 112 pounds. For use with gasoline, diesel, or kerosene fuels. Wheeled for easy transportation, high density polypropelyne for dent, corrosion and rust resistance. 14 gallon portable fuel container. Hand pump allows you to eliminate spillage and overfills by stopping and restarting the flow of fuel when needed. Comes with maxflo siphon pump with at-the-handle pump control allows for auto-shut-off and restarts and clean, hassle-free siphon control.
Brand | Scepter #ad |
Manufacturer | Scepter #ad |
Height | 33.8 Inches |
Length | 16.2 Inches |
Weight | 19 Pounds |
Width | 12.7 Inches |
Part Number | 6792 |
Model | 6792 |
Warranty | 1 Year Limited |
More information #ad
2. classAcustoms
#ad
Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank
#adclassAcustoms #ad - Do not make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.Tank built-in fittings: two 1. 5" female npt fitting - fitting is sealed and water-tight, to use remove membrane with razor knife TWO. 5" female npt fitting - fitting is open do noT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
More information #ad
Great extra water storage in rv, hot dog carts, pop-up camper, smaller food vendors and portable hand washing sinks. 65 gallon fresh or gray water holding tank manufactured by class a Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage. Due to the manufacturing process +/-. 25" on each measurement. Class a customs manufactures this item in the USA in Elkhart, concession trailers, off-road vehicles, Indiana. Non-pressurized tank: tank must be vented allowing air in and out during use. Water tank measurements: 44.
Brand | classAcustoms #ad |
Manufacturer | Class A Customs #ad |
Part Number | T-6500 |
More information #ad
3. Lund
#ad
Lund 73750 Black 50-Gallon Full-Mid Size Vertical Liquid Storage Tank
#adLund #ad - Not intended for transferring gasoline or other flammables and should be not be used as an auxiliary fuel tank. Recommended for construction and agricultural use and designed to accommodate LUND's full-size cross bed boxes.More information #ad
Comes with a limited lifetime warranty that protects against defects in materials and workmanship. 50-gallon rectangular liquid storage tank made of 14-gauge steel with a black finish. Measures 60-inches l x 18-inches W x 12-inches H.Brand | Lund #ad |
Manufacturer | Lund #ad |
Height | 18 Inches |
Length | 60 Inches |
Weight | 76 Pounds |
Width | 12 Inches |
Part Number | 73750 |
Model | 73750 |
Warranty | Limited Lifetime Warranty |
More information #ad
4. classAcustoms
#ad
Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank
#adclassAcustoms #ad - Due to the manufacturing process +/-. 25" on each measurement. Water tank measurements: 505” longest length not including fittings x 17. 5” x 19. 5” - tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. Do not make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage.Tanks are made in a warehouse clean each tank prior to use to remove any debris, hot dog carts, pop-up camper, smaller food vendors and portable hand washing sinks.
More information #ad
Class a customs manufactures this item in the USA in Elkhart, scuffs or marking from the manufacturing process. Great extra water storage in rv, off-road vehicles, concession trailers, indiana. Non-pressurized tank: tank must be vented allowing air in and out during use. Tank built-in fittings: two 1. 5" female npt fitting - fitting is sealed and water-tight, to use remove membrane with razor knife TWO. 5" female npt fitting - fitting is open do noT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings. For filling tank it is recommended to use a fill dish or other gravity process. 75 gallon fresh or gray water holding tank manufactured by class a Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
Brand | classAcustoms #ad |
Manufacturer | Class A Customs #ad |
Part Number | T-7500 |
More information #ad
5. Nilight
#ad
RV, SUV, Nilight TR-09 3PCS 60 Bed Light Strip 270 LED with On/Off Switch Blade Fuse Splitter Extension Cable for Cargo, Pickup Truck, Boat,2 Years Warranty
#adNilight #ad - Flexible & durable design: the light strip is in iP67 sealed housing, super durable and flexible with up to 30, well protect strip against raindrop, dirt and sand, 000 hrs lifespan.Impressive brightness: the 3pcs light strip includes 270 pcs 5050-SMD LED chips, outputs a 3900LLM 6000K super bright white light to light up your entire truck bed. You can also add on the included mounting hardware for extra security. Quick installation: peel and stick, the self-adhesive tape with tough-as nail adhesive enhancer for strong sticking.
More information #ad
Always ensure the circuit safety for your on-road driving. Wide application: can be widely used for RV Awning Light, step bar led light, truck bed light, side door light etc. Ease and safe electrical hookup: come with splitter cable, 5A inline blade fuse, on/off switch, extension cable, mounting hardware for all your wiring needs.Brand | Nilight #ad |
Manufacturer | Nilight #ad |
Part Number | TR-09 |
Model | TR-09 |
Warranty | 2 Years Warranty |
More information #ad
6. Valterra
#ad
Campers, Trailers, Valterra Twist-On Waste Valve, Mess-Free Waste Valve for RV's
#adValterra #ad - No more mess with an old valve problem. Eliminates expensive service work. Twists onto your current waste valve. Rotates to most convenient position.More information #ad
Brand | Valterra #ad |
Manufacturer | Valterra Products LLC #ad |
Height | 0.78 Inches |
Length | 1.55 Inches |
Weight | 1 Pounds |
Width | 0.78 Inches |
Part Number | T58 |
Model | T58 |
More information #ad
7. Camco
#ad
Camco Dual Flush Pro Holding Tank Rinser with Gate Valve- Thoroughly Cleans Entire Septic System and Breaks Down Tough Clogs in Pipes 39062
#adCamco #ad - Convenient way to clean the entire septic system. Clear, break resistant polycarbonate adapters make it easy to see when the tank is done rinsing.More information #ad
Anti-siphon valve and complete valve assembly included. Allows to backfill and flush black and grey water tanks. Forces water back up into plumbing lines to break up clogs in pipes.Brand | Camco #ad |
Manufacturer | Camco #ad |
Height | 5 Inches |
Length | 10 Inches |
Weight | 1.5 Pounds |
Width | 9 Inches |
Part Number | 39062 |
Model | 39062 |
Warranty | 1 year against manufacturing defects |
More information #ad
8. Camco
#ad
Camco Ready to Use Gate Valve with Built-in Clear Adapter | Fits All 3-inch Sewer Fittings | Ready to Use Construction 39053
#adCamco #ad - Universal fit: Fits all 3-inch sewer fittings. Backup gate valve: Provides a quick fix for leaky valves. Features: clear adapter features 4 bayonet prongs for easy hookup; Cap provides a leak-free, odor-tight connection.More information #ad
Clear adapter: the 3 ½-inch long clear adapter allows you to see when the tank is completely empty. Ready to use: simply connect to your RV's drain pipe.Brand | Camco #ad |
Manufacturer | Camco #ad |
Height | 15.5 Inches |
Length | 0.8 Inches |
Width | 5.8 Inches |
Part Number | 39053 |
Model | 39053 |
Warranty | 1 year manufacturer |
More information #ad
9. Hopkins
#ad
FloTool 42003MI 16-Quart Drain Container
#adHopkins #ad - Integrated handle and grip for easy carrying and handling. Stores upright or flat without leaking. Developed for high capacity for multiple changes and large equipment. Extended design captures the full stream of oil eliminating messes. Leak proof design for secure disposal.More information #ad
Brand | Hopkins #ad |
Manufacturer | FloTool #ad |
Height | 6 Inches |
Length | 17.25 Inches |
Width | 20 Inches |
Part Number | 42003MI |
Model | 42003MI |
Warranty | As labelled |
More information #ad
10. J-B Weld
#ad
J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty, 2 oz.
#adJ-B Weld #ad - Plasticweld does not shrink and Can Be Molded, Sanded, Shaped, Drilled And Cut. Rebuild automotive trim, fiberglass parts and vinyl siding. Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC. Product features and strength: j-b weld plasticweld has lap shear strength of 600 psi.Plasticweld can withstand continuous temperatures Up To 250Of 121Oc And Intermittent Temperatures Up To 300Of 148Oc When Fully Cured. Cure and set time: after kneading the two part formula together by hand, plasticweld Takes 25 Minutes To Set And Cures In 3 Hours.
More information #ad
J-b weld plasticweld Set And Cure Color Is Off White. J-b weld plasticweld: a hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds And Surfaces. Bonds instantly. Applications: abs, marine repairs & fiberglass parts, Auto Bumpers And Trim, plastic water tanks, Vinyl Surfaces And Siding, pvc & cpvc pipes and Plastics, And Plumbing. Will not shrink or pull away. J-b weld plasticweld is designed for diy plastic repairs on abs, pvc & cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water. Superior strength.
Brand | J-B Weld #ad |
Manufacturer | JBWeld #ad |
Height | 1.19 Inches |
Length | 7.5 Inches |
Weight | 0.15 Pounds |
Width | 3.8 Inches |
Part Number | 8237 |
Model | 8237 |
Warranty | LIMITED WARRANTY |
More information #ad