As an Amazon Associate I earn from qualifying purchases.
1. EXZEIT #ad
Exzeit Strong Magnet Base for Led Work Light Light bar，Powerful Magnetic Mounting Bracket with Protecting Rubber for Off road Driving Lighting Two PCS #adEXZEIT #ad
- Plz make sure the connection surface between the magnect and your vehicle is clean and flat. There are 12pcs magnets in one base, making the work light base strong enough to stand stable, and 48 in total in two set, no shaking or falling down.
Strong magnet. Rough and unclean surface may decrease the magnet suction power. This powerful magnetic mounting bracket base are widely applicable to led work lights, SUVs, driving lights, tractor, fog lights on trucks, ATVs, etc.
Each base is coated with thickened rubber. Rubber coating helps it from sliding and scratching your car paint. Anti-scratch. Wide application. Installation instruction.
2. WFPOWER #ad
Emergency Light, Work Light Base Magnet, Fog Light, Powerful LED Light Magnetic Mount Holder with Rubber Pad for Off-Road Driving Lamp, Roof Light Bar, WFPOWER 2 Pack Light Bar Magnetic Mount Bracket #adWFPOWER #ad
- No-hole drilling to fix on your vehicles and devices. No drilling installation - mounting led light on the base and tighten anti-loose screws, then adsorbed on your car. Wide use - our bracket is suitable for most kinds of cars, ATV, 4WD, boat, UTE, SUV, truck, etc.
Anti-scratch protective Cover - Soft rubber covers help prevent scratching surface. Powerful magnet - our superior strong magnetic light bar mount are made of solid steel and powerful Neodymium Magnetic Discs, therefore providing strong connection between the vehicle and led light bar.
3. Nilight #ad
2 Years Warranty, Powerful Sucker Holder for Bottom-Mounted Offroad LED Work Light Mounting on Hood, Nilight 90042B 2PCS Magnetic Base LED Light Bar Mounting Brackets #adNilight #ad
- Easier mounting: no drilling needed, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, just do flattest, please the 7th picture on the left.
Anti-scratch: the magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation. Package include: 2 x magnetic mounting base.
Once matching well with the flat surface, it is strongly held even on emergency braking or driving on the rugged mountain road. Multiple mounting functions: you can use a single magnetic base separately to mount small led work light, or use two or three together to mount a longer bottom-mounted LED light bar. Strong hold: each magnetic base comes with 12 PCS magnets.
|Warranty||2 Years Warranty|
4. LXATPRT #ad
Universal Magnetic Light Bar Base, Emergency Light, Work Light Mounting Brackets, Roof Light Bar, Powerful LED Light Magnet Mount Holder with Rubber Pad for Off-Road Driving Lamp, Fog Light（2 Pack） #adLXATPRT #ad
- High compatibility: it can be used to install any side-mounted light bar on the hood or roof, double row, straight or curved, three row or four row. Convenient installation: no need to drill, just perform a plane test, install the lamp on the bracket, and then install the entire kit in the installation position.
Everything is normal, single row, there is still enough space to adjust the installation angle of the lamp. Material: soft rubber can protect the magnet from damage, avoid scratches on the painted surface, and restrict the magnet from sliding on a smooth surface.
If you have any questions, please contact us in time, and we will reply you within 24 hours. The universal magnetic light bar base is made of solid steel and strong magnetic base, without drilling, no falling, emergency braking and no shaking. Perfect after-sales service: we promise a one-year warranty.
5. Nilight #ad
Powerful Sucker Holder for Straight Curved Side-Mounted LED Light Bar Mounting on Hood Roof, Nilight 2PCS Magnetic Base LED Light Bar Mounting Brackets, 2 Years Warranty #adNilight #ad
- Package include: 2 x magnetic mounting brackets with sucker base. Easier mounting: no drilling needed, mount the light on the bracket, and then mount the whole kit on the mounting position. For the “l” shape bracket, or remove “L” shape bracket, you can also choose to mount them inward or outward.
Dual mounting functions & directions: can be used as a whole to mount side-mounted light, just use the magnetic base to mount bottom-mounted light.
Strong hold: each magnetic base comes with 12 pcS magnets. Fit type: Universal Fit. Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road.
All works well and still remain ample room to adjust the mounting angle of the light. High compatibility: can be used on the hood or roof to mount any side-mounted light bars, single row, double row, triple row, straight or curved, or quad row. For detailed mounting tips, just do flattest, please check the 9th picture on the left.
|Warranty||2 Years Warranty|
6. Lightronic #ad
Universal-fit 3" Round Ultra Strong Power Magnet Base/Magnetic Holder for LED Offroad Light/Work Light/Light Bar Mount on Steel Surface of Trucks & SUV, 2 Pack, w/ Rubber Pad to Prevent Scratches #adLightronic #ad
- With rubber pad to prevent stretches and protect the vehicles’ paint. Mount one light less than 1kG/2. 2lbs per mount, or use one pair of mounts to mount a single lightbar. Ultra-strong magnetic mount. Add lighting without drilling holes. Universal fit to any steel surface mount.
7. samman #ad
Samman Magnetic Base LED Light Bar Mounting Brackets Windshield Powerful Mount Bracket Sucker Holder Roof Off Road Holder for LED Work LED Pods Light Straight Curved Quad Row LED Light 2PCS … #adsamman #ad
- Anti-scratch cover: the magnetic bracket with the soft rubber cover, which is keeping your car from scratching, protect your vehicle well. No-hole drilling to fix on your vehicles and devices. Wide application: fit for 3 inch to 54 inch led pods and led light bars, suv, atV, You can use the magnetic brackets on a variety of devices, 4WD, UTV, boat, Tractor, Farming, such as most kinds of Vehicle, Truck, Marine and so on.
360 degree free rotation: these led magnetic base brackets can be rotated 360 degree to adjust LED light, allow you to change the direction of light beam which light up every corner.
Easy to install: mounting led light on the base and tighten anti-loose screws, then adsorbed it on your car. Strong magnetic brackets: 2pcs super strong magnetic mounting brackets are made of solid steel, super strong magnetic between vehicle and LED light, containing 48 pieces of powerful magnet bases, not fall down and shaking when emergency braking at 100mph.
8. AKD Part #ad
Magnetic Base LED Light Bar Mounting Brackets, AKD Part Windshield Powerful Mount Bracket Sucker Holder Roof Off Road Holder for LED Work LED Pods Light Straight Curved Quad Row LED Lighting #adAKD Part #ad
- The strong magnetic brackets perfect for almost all straight / curved light bar, SUV, driving lights in the market, suit for most kinds of Truck, ATV, Boat etc. No drilling installation: amazing magnetic mounting brackets for driving lights have strong magnetism, it can stick on the vehicle firmly.
Very simple and easy installation, no drilling and no any terrible holes on your vehicle, only use our shock absorber screw and rubber gasket to tighten the base, keep your ride a OEM factory looking without any scratching. Strong stability: add metal pads for magnet base mounting brackets during installation, work lights, to solid and steady the base and brackets, Offroad, no shaking during your driving way.
Any problem please feel free to contact us, 24 Hours Online Quick Reply Service and 2 Years 100% Quality Assurance! Advanced material: the superior strong light bar magnets mounting brackets are made of solid steel and powerful magnetic bases, no fall down, therefore these strong magnetic base mounting brackets between the vehicle and LED lights, can emergency braking in 100km/h, no shaking, protect your ride well.
We have upgraded our magnetic base mounting BRACKETS. 360 degree rotation: these mounting brackets can be perfect rotated 360 degree to adjust to any height and angle to fit the perfect installation, you can install straight / curved led light bar at any height you want. Attention: package comes with 2* magnetic base mounting brackets.
|Brand||AKD Part #ad|
|Manufacturer||AKD Part #ad|
|Warranty||Manufacturer warranty for 2 years from date of purchase|
9. omotor #ad
Omotor Powerful Mount Bracket Sucker Holder Magnetic Base f/Roof Led Light Bar Offroad #adomotor #ad
- 2pcs magnetic Base Mount Brackets. No more drifting holes all over your lovely ride, lights can be installed. Package includes: 1 Pair of mount brackets. Have rubber covers to keep from scratching surface. Material type: stainless Steel + 14pc Powerful Magnet Base.
10. FOXCID #ad
Powerful Magnet Mounting Brackets Holder with Rubber Pad for Work Light， Off-Road Driving Lamp, FOXCID 2 Pcs Magnetic Light Bar Mount, Emergency Light, Curved LED Light Bar, Roof Flashlight #adFOXCID #ad
- Multiple mounting functions: you can use a single magnetic base separately to mount small led work light, or use two or three together to mount a longer bottom-mounted LED light bar.
Wide use - our bracket is suitable for most kinds of cars, 6WD, boat, truck, ATV, SUV, UTE, etc. Easier mounting: no drilling needed, mount the light on the bracket, just do flattest, and then mount the whole kit on the mounting position.
Strong hold: each magnetic base comes with 4 PCS magnets. Once matching well with the flat surface, it is strongly held even on emergency braking or driving on the rugged mountain road. Anti-scratch: the magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation.