Top 10 Mttp Solar Charge Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Victron

#ad

Victron SmartSolar MPPT 100/50 Charge Controller

#ad
Victron #ad - The intelligent load output function prevents damage caused by running batteries 'flat'. Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.

The smartsolar charge controller will even recharge a severely depleted battery. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. Smartsolar mppt 100-volt 50 amp: a solar charger gathers energy from your solar panels, fastest technology, Using the latest, and stores it in your batteries, SmartSolar maximises this energy-harvest.

By constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
BrandVictron #ad
ManufacturerVictron #ad
Height2.76 Inches
Length5.12 Inches
Weight3.24 Pounds
Width7.48 Inches
Part NumberSCC110050210
ModelSCC110050210

2. Autoday-3C

#ad

Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A

#ad
Autoday-3C #ad - If the voltage of battery is back to normal and the load will restart working. Mppt solar charge controller mppt10-60: compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.

Note: the regulator is only suitable for lead acid batteries: OPEN, GEL. Any problem please contact with us, we will try our best to solve your problem and make you satisfied within 24 hours. It is not suited for nickel metal hydride, AGM, lithium ions or other batteries. This mppt controller has perfect soc function, control charge current, and supply power to the loads. Prevent the battery from over-charging, over-discharging and reverse charging to solar panels during nights. When the battery voltage is low, the controller will automatically cut off the load from the system.
BrandAutoday-3C #ad
ManufacturerAutoday #ad
Part NumberAutoday-771

3. EPEVER

#ad

Solar Charge Controller Max 100V Input Negative Grounded Solar Regulator, EPEVER MPPT Solar Charge Controller 30A 12V 24V Auto, for Lead-Acid and Lithium Batteries

#ad
EPEVER #ad - The tracer an's charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging Bulk, Boost, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance.

It protect the battery from being over-charged by the solar modules and over-discharged by the loads. Die-cast aluminum design allows for efficient heat dissipation. This mppt controller protection built-in against reverse polarity, over-discharging, overload, overcharging, short-circuiting, and reverse current. Solar charge regulator support pc software, flooded and lithium. Mppt charge controller with blackligh LCD screen for displaing system information and working condition.

Maximizing the energy from solar panels to charge your system. Negative ground charge controller featuring advanced MPPT technology with high tracking efficiency up to 99. 5% and peak conversion efficiency of 98%. Auto identifying 12V/24V DCsystem voltage. Also compatible with various Deep Cycle battery options: Sealed, Gel,. Multiple load control method, APP and MT-50 .
BrandEPEVER #ad
ManufacturerEPEVER #ad

4. PowMr

#ad

PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto, Max 190VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium BatterySoftware Update VersionMPPT-60A

#ad
PowMr #ad - What you getour fan-favorite 24-month warranty from powmr. We consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. Intelligence fan-on temperature >45℃ and off < 40℃, Porous heat dissipation.

And fan use bearing technologies increase life UP TO 5000hrs in normal use. Blacklight lcd dispaly pv voltage/output power/battery voltage/charging current/working mode/Temperature, TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. Fit for usercan be set lithium, lifepo4, linicomno2/vented/flooded/Sealed/Gel/NiCd battery.

User programmable for absorption voltage/Floating voltage/Low voltage disconnect. Load Timer. Software update version100% mppt 60a solar charge controller intelligent, pv utilization ≥99%. Built-in dsp controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Max efficiency ≥98. 1%, make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller. Copper wires:9AWG. Hope you love it.
BrandPowMr #ad
ManufacturerPowMr #ad
Part NumberMPPT-60A

5. SolarEpic

#ad

EPEVER 40A MPPT Solar Charge Controller 100V Input Tracer 4210AN with Display Negative Ground Lithium Battery Charger Work with LiFePO4

#ad
SolarEpic #ad - Die-cast aluminum design and nature cooling. Four battery type options:Sealed, Gel, Flooded, and USER define. Epever tracer 4210an series negative Ground and compatible with LithiumLiFePO4 Battery Charging. High tracking efficiency up to 99%. Compatible with 12v or 24V battery system. Multiple load control modes: manual control, light ON/OFF, light On+Timer and test mode.
BrandSolarEpic #ad
ManufacturerEPEVER #ad
Height2.48 Inches
Length9.92 Inches
Weight4.19 Pounds
Width7.09 Inches
ModelTracer4210A
Warranty2 years warranty by solarepic from the date of purchase.

6. Renogy

#ad

Renogy Rover 20 Amp 12V/24V DC Input MPPT Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

#ad
Renogy #ad - After pairing is done You can monitor your system and change parameters directly from you cell phone or tablet. Conversion efficiency of 98%. Rs232 port allows the rover to communicate with the bt-1 bluetooth module, which can pair with the Renogy BT Smart phone app.

Automatically detect 12v or 24v dc system voltages innovative mppt technology with High tracking efficiency up to 99% and peak. Compatible with various deep cycle battery options: sealed, and lithium. Reverse protection: any combination of solar module and Battery, overload, gel, boost, over-discharging, without causing damage to any component. Customizable charging voltages. Error code detection for easy self diagnoses. Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring.

The bt-1 bluetooth module is a great addition to any Renogy charge controllers with a Rs232 port and is used to pair charge controllers with the Renogy BT app. Charges over-discharged Lithium-Ion batteries. 4-stage charging: bulk, and equalization and LCD screen with programmable charging parameters. Electronic protection: overcharging, Flooded, Float, and short circuit.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.34 Inches
Length5.94 Inches
Weight1.5 Pounds
Width8.27 Inches
Part NumberRNG-CTRL-RVR20
ModelCharge Controller

7. Onesolar

#ad

Sealed, and Flooded Batteries, 60A MPPT Solar Charge Controller DC 12V24V48V Auto Battery Regulator PV 150V Input MPPT Charge Controller for Lithium, Gel

#ad
Onesolar #ad - Display the daily power generation curve and current curve. Display fault records, to facilitate customer troubleshooting in a timely manner. Support 4 charging options: Sealed, Gel, Flooded and User-defined.

Perfect protection function. Lcd display-clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes, Chinese and English, multi-function LCD screen and operation menu. The tracking rate of maximum power is ≥98. 5% and the maximum conversion rate is >98%, 、Intelligent maximum power point tracking technology increases efficiency 25%~30%. Ultra-fast tracking speed, tracking 1 times per second. Solar panel: fit for 900w12v;1700w24v;3400w48v;Max input Voltage:150V PV.
BrandOnesolar #ad
ManufacturerTop One Power #ad
Height3.58 Inches
Length12.32 Inches
Width9.06 Inches
Part NumberB07GW57RN5

8. Onesolar

#ad

60A MPPT Solar Charge Controller 48V 36V 24V 12V Auto Battery System,Max 150VDC Input Solar Regulator Negative Grounded with LCD Display for Sealed Gel AGM Flooded Lithium Battery

#ad
Onesolar #ad - Support 4 charging options: sealed, Gel, Flooded and User-defined, 12V 24V 48V Auto. Multiple protection against overcharge, over discharge, reverse polarity, over load, short circuit, over heat and battery under voltage. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%. Solar panel: fit for 900w12v;1700w24v;3400w48v;Max input Voltage:150V PV. Lcd display-clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes.
BrandOnesolar #ad
ManufacturerTop One Power #ad
Height5.51 Inches
Length12.32 Inches
Width10.63 Inches

9. Renogy

#ad

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

#ad
Renogy #ad - Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Smart 4-stage pwm charging bulk, overcharging, short-circuit, Boost, Float, and Equalization increases battery life and improves system performance.

Then secure each cable by rotating the screws clockwise CW to the closed position. Compact in size makes it easy to install virtually anywhere. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app.

Capable of charging over-discharged lithium batteries. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Intelligent protection against reverse polarity, and reverse current. Backlit lcd screen displays system operation, diverse load control, and error codes. Power source Type: Solar-Powered. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Weight0.27 Pounds
Width3 Inches
Part NumberCharge Controller
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty

10. Binen

#ad

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display

#ad
Binen #ad - Please be careful to install the charger controller on a flat, well-ventilated place. Note: the charge controller will heat up when it is running. Fully 3-stage pwm charge management, open-circuit protection, reverse protection, improve system efficiency and prolong the life span of the battery.20a solar charge controller : binen solar charger controller are ul 1741 certified, automatically manage the working of solar panel and battery in solar system.

Dual usb output 5V/2. 5a max, the solar charger controller compatibility with 12V 24V system. Easy to install and operate: the charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, low heat production. Discharge current: 10A, build-in industrial micro controller, to support mobile phone chargeing. Multiple protection functions: binen solar controller has short-circuit protection, over-load protection.

Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, GEL, or other batteries. For protecting the lifespan of your battery, aGM, lithium, Liions, once the voltage of the battery drop below 8V, it is not suited for nickel hydride, the solar controller will turn off automatically. Lcd display: comes with a display that can clearly indicate the status and data, suitable for home, industrial, it can be conveniently switched modes and parameter configuration, commercial etc.
BrandBinen #ad
ManufacturerBinen #ad
Weight0.37 Pounds
Part Number4332694907