Top 10 Nb Miata Exhaust – Automotive Replacement Exhaust Headers

As an Amazon Associate I earn from qualifying purchases.

1. Hooker

#ad

Hooker Headers BH10309 Header 1999-2000 Mazda Miata Mx-5 Nb 1.8L-L4

#ad
Hooker #ad - Tuned-length primary tubes for maximum exhaust scavenging and velocity. Industry’s best welds for durability. Designed for optimal performance. Mandrel-bent tubing for smooth exhaust flow. All necessary hardware included for a complete installation.
BrandHooker #ad
ManufacturerHooker Headers #ad
Part NumberBH10309
ModelBH10309

2. Borla

#ad

Borla 14411 Cat-Back System Exhaust

#ad
Borla #ad - Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses. Includes a rear exit single round angle-cut intercooled tip. Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles. Borla uses patented straight-through and multi-core technology to help increase horsepower and torque.
BrandBorla #ad
ManufacturerBorla #ad
Height0 Inches
Length0 Inches
Weight22 Pounds
Width0 Inches
Part Number14411
Model14411

3. MagnaFlow Exhaust Products

#ad

Miata Performance Exhaust Kit, Single Straight Passenger Rear Exit, Stainless Steel 2.25in Main Piping, MagnaFlow Cat-Back Performance Exhaust System 15715, Polished 4in Exhaust Tip, Street Series

#ad
MagnaFlow Exhaust Products #ad - Limited lifetime construction warranty - Performance that lasts. Bolt-on installation - magnaflow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit AND outperform the original equipment. Moderate sound/street series - street series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels.

This exhaust kit is specifically designed for the 1990-1997 Mazda Miata. These systems are 50-state legal and designed to optimize power based on the factory calibration. It is designed to replace the original exhaust components following the catalytic converter. Enjoy worry-free ownership knowing that you're backed by MagnaFlow’s limited lifetime construction warranty.

Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Cat-back performance - extensive testing and dyno-proven power make this exhaust truly developed for the driven. Built to be the exhaust that lasts the lifetime of your vehicle. Stainless steel construction - highly corrosion resistant, stainless steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity.
BrandMagnaFlow Exhaust Products #ad
ManufacturerMagnaFlow Exhaust Products #ad
Height0 Inches
Length0 Inches
Weight1 Pounds
Width0 Inches
Part Number15715
Model15715
WarrantyLifetime Parts Only

4. High performance parts

#ad

High Performance Parts Short Ram Air Intake Kit & Black Filter Combo Compatible for 1999-2005 Mazda Miata MX-5 1.8L L4 Engine

#ad
High performance parts #ad - Quick install easy to assemble with all parts and installation guide included. No additional parts needed. Please feel free to contact us if you have any questions regarding this product.

Customer satisfaction is our number one priority. Fitment please check to make sure this intake will fit your vehicle. A fitment guide has been provided on the top left, for your reference. Durability premium parts made from brushed t-306 aluminum and industrial grade stainless steel clamps. Increase horse power and torque by 6 to 10 percent. High quality, long lasting, washable and reusable air filter included. Performance ultimate intake kit with higher explosive horsepower output and improved throttle response. Satisfaction we have an experience team of service representative ready to assist you with any of your questions or concerns.
BrandHigh performance parts #ad
ManufacturerHigh Performance Parts #ad
Part NumberSI-MZ-04CK

5. Yonaka Motorsports

#ad

Yonaka Mazda Miata 1990-1997 2.5" Stainless Steel Performance Catback Exhaust

#ad
Yonaka Motorsports #ad - 2. 5" mandrel bent piping. Direct bolt on fit to OEM, all installation hardware included. Quiet, and deep hum, clean, without the irritating mid range raspy sound.3. 5" stainless steel exhaust tip. Fully polished stainless steel.
BrandYonaka Motorsports #ad
ManufacturerYonaka Motorsports #ad
Height18 Inches
Length48 Inches
Weight26 Pounds
Width10 Inches
Part NumberYMCB-MIA9097

6. DC Sports

#ad

Matte Black Powdercoat, Sedans, DC Sports EX-1011B Performance Bolt-On Resonated Muffler Tip with Clamps and Adapters for Universal Fitment on Most Cars, and Trucks

#ad
DC Sports #ad - Resonated to enhance sound. 3 bolt clamp System. Fits 1. 75" to 2. 5" pipes. Flat black finish. Easy install, bolts on in minutes. Inlet diameter : 2. 875", outlet diameter : 3. 75", length : 9".
BrandDC Sports #ad
ManufacturerDC Sports #ad
Height9 Inches
Length3.9 Inches
Weight1.8 Pounds
Width3.9 Inches
Part NumberEX-1011B
ModelEX-1011B

7. Victor Reinz

#ad

Victor Reinz 71-53527-00 Engine Valve Cover Gasket Set for Select 01-05 Mazda Miata 1.8L

#ad
Victor Reinz #ad - Valve cover gasket set for 1. 8l engines found in 2001-2005 Mazda Miata vehicles. Victor reinz valve cover gaskets deliver the quality materials you demand.

Where appropriate, splitting, victor reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, or the need to retorque. Oem equivalent part number: bp6d-10-235 A; Vs50602R; Vs50485. Fit type: Vehicle Specific. Although the primary task of valve cover gaskets is to seal oil and oil spray, exhaust crossovers in the cylinder heads, they must withstand high temperatures brought on by nearby exhaust manifolds, and EGR systems. Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs.
BrandVictor Reinz #ad
ManufacturerVictor Reinz #ad
Part Number71-53527-00
Model71-53527-00
WarrantyVictor Reinz Products are warranted to be free from defects in workmanship or material for a period of one (1) year from the date of purchase. The remedy for such defect is limited to the free replacement of the defective product. Liability for neglect, misuse, special, incidental, direct, indirect and consequential damages is specifically disclaimed. NO OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, IS MADE.

8. Jones Exhaust

#ad

Jones Exhaust FLX1346B

#ad
Jones Exhaust #ad - 6 inch long. Internal braid. Jones exhaust flx1346b stainless steel flex tube features 1. 75 inch diameter. Necks are expandable and aluminized. 2 ply 16 gauge stainless Steel Wire Braid.
BrandJones Exhaust #ad
ManufacturerJones Exhaust #ad
Height6.3 Inches
Length2.9 Inches
Weight0.9 Pounds
Width2.6 Inches
Part NumberFLX1346B
ModelFLX1346B

9. Walker's

#ad

Walker Exhaust Quiet-Flow 55559 Exhaust Muffler Assembly

#ad
Walker's #ad - Design validated -- acoustic and flow tested for quality OE-style sound you can count on. Easy to install -- direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn't require specialized fabrication and/or welding.

Premium acoustic control -- oe-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes. Built to last -- internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life.

Corrosion resistant stainless steel -- the only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection.
BrandWalker's #ad
ManufacturerTenneco (Dynomax, Walker, Thrush) #ad
Height10.5 Inches
Length57 Inches
Weight1 Pounds
Width19.5 Inches
Part Number55559
Model55559
WarrantyLimited Lifetime Warranty

10. Mishimoto

#ad

Mishimoto MMRAD-MIA-99 Performance Aluminum Radiator Compatible With Mazda MX-5 Miata 1999-2005

#ad
Mishimoto #ad - Inlet & outlet: 1. 25" / core thickness: 2. 05" / tank wall Thickness: 008". Overall size: 26. 2" x 17. 2" x 2. 55" / core size: 12. 8" x 22. 17" / rows: 2. Mishimoto Lifetime Warranty. Tig-welded aluminum radiator includes high-pressure rad cap and magnetic drain plug. Direct fit for the 1999-2005 Mazda Miata, manual.
BrandMishimoto #ad
ManufacturerMishimoto #ad
Height60.96 Inches
Length77.47 Inches
Weight5 Pounds
Width19.05 Inches
Part NumberMMRAD-MIA-99
ModelMMRAD-MIA-99
WarrantyManufacturer Warranty