Top 10 Oxygen Sensor Socket Set – Automotive Replacement Oxygen Sensors

As an Amazon Associate I earn from qualifying purchases.

1. ABN

#ad

29mm – All Vehicle O2 Removal and Installation, 27mm, ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm 7/8in

#ad
ABN #ad - Contents: package includes 1 29mm pressure/vacuum switch 6pt socket + 1 22mm 7/8 inch vacuum switch 6pt socket + 1 22mm 7/8 inch vacuum switch 12pt socket + 1 27mm oil pressure sending unit socket + 1 1-1/16 and 1 inch oil pressure sending unit socket + 1 7/8 inch long oxygen sensor socket wrench + 1 7/8 inch short oxygen sensor socket wrench + 1 carrying case.

Matches your car: universal fit for audi, peugeot, citroen, renault, and volkswagen; sizes include 22mm 7/8”, bmw, 27mm, mercedes, skoda, vauxhall/open gm, and 29mm; For both heated and non-heated oxygen sensors; Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions; Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires. No more hassle: the abn oxygen 02 sensor socket 7-piece tool kit – 22mm 7/8” inches, 29mm – all vehicle O2 Removal and Installation is for inspection, oil pressure sending units, vacuum switches, and installation of hard-to-reach oxygen sensors, 27mm, oil pressure switches, thermal sensor switches, removal, and brake light switches; Each socket is permanently etched with size marking for your convenience.

Easy storage: heavy-duty 9” x 2. 25” x 8” inch 22. 9cm x 5. 7cm x 203cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Built to last: constructed from chrome-vanadium steel CR-V for extra strength and longevity; Tools have a light coating of oil to protect them from rusting.
BrandABN #ad
ManufacturerABN #ad
Height7.5 Inches
Length9.25 Inches
Weight2.09 Pounds
Width2.5 Inches
Part Number3884

2. TEKTON

#ad

TEKTON 47749 3/8-Inch Drive by 7/8-Inch 22 mm Offset Oxygen Sensor Socket

#ad
TEKTON #ad - Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires. Removes and installs oxygen sensors on vehicles with computer-controlled engines. Common 6 point, 7/8 in. High-performance chrome molybdenum steel construction. Use with any 3/8 inch drive ratchet or breaker bar. 22mm socket fits most oxygen sensors.
BrandTEKTON #ad
ManufacturerTEKTON #ad
Height1.25 Inches
Length2.25 Inches
Weight0.34 Pounds
Width1.25 Inches
Part Number47749
Model47749
WarrantyAlways Guaranteed: [email protected]

3. GOHAWKTEQ

#ad

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

#ad
GOHAWKTEQ #ad - Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines. Material: these sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance.

Package: there are 5pcs sockets and wrenches included in the red case, 1-pc 1/2” dr. Extra deep broach socket 3-1/8” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc 3/8” Dr. Warranty: we offer 30 days and 365 days free replacement warranty. Usage: this tool sets are used to remove. Design: special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire. Offset crowfoot socket wrench 1-15/16” long, 1-pc 3/8” dr.
BrandGOHAWKTEQ #ad
ManufacturerGOHAWKTEQ #ad
Part NumberG3001U

4. ABN

#ad

ABN O2 Sensor Socket Tool for Oxygen Sensor 5pc Kit, 22mm Oxygen Sensor Socket and Vacuum Socket with Thread Chaser Set

#ad
ABN #ad - Remove & install sensors: use the abn oxygen sensor tool set to remove, replace, inspect, and install heated and non-heated oxygen sensors and hex vacuum switches on most vehicles with computer-controlled engines; Universal 6-point 7/8-inch 22mm socket opening fits hexagon oxygen sensor while common 3/8-inch and 1/2-inch drive ends can be used with ratchet or breaker bar; Includes 3 sockets and 2 thread chasers.

Package contents: o2 sensor tools package includes 1 3/8-inch drive deep broach socket 3-1/8-inch length, 1 3/8-inch drive m12 x 1. 25mm thread chaser, 1 1/2-inch drive offset 22m crowfoot socket wrench 1-15/16-inch length, 1 3/8-inch drive M18 x 1. 5mm thread chaser, 1 3/8-inch drive low-profile 7/8-inch 22mm crowfoot vacuum switch socket wrench 6pt 1-1/4-inch length, and 1 carrying case; Compatible with 3/8-inch and 1/2-inch driver tools not included.

Easy to use: use one of the socket wrenches to turn and loosen the sensor, then clean the manifold threads with the thread chaser; We recommend using the crowfoot socket to initially loosen the sensor as it generates more torque, then use the other socket once the sensor is free. Easy storage: heavy-duty 5” x 4. 4” x 2. 1” inch 12. 7x11. 2x5.
BrandABN #ad
ManufacturerABN #ad
Height2.1 Inches
Length5 Inches
Weight1.8 Pounds
Width4.4 Inches
Part Number5161

5. ARES

#ad

An Injector Socket and Oil Sending Unit Sockets, High Strength Chrome Vanadium Steel, Oxygen Sensor Sockets, ARES 70318-10-Piece Oxygen Sensor Socket Set, Set Includes Thread Chasers

#ad
ARES #ad - Includes: this set includes a 29mm 1/2-inch drive vacuum switch socket, 22mm 3/8-inch drive vacuum switch socket, 22mm 1/2-inch drive heated O2 Sensor Socket, 27mm 3/8-inch drive oil sender Unit 1-inch Socket, 22mm 3/8-inch drive 6-Pt Offset O2 Sensor Wrench, 27mm 3/8-inch drive oil sender unit 1-1/16-inch socket, 27mm 1/2-inch drive Injector Socket, M12 x 1.

25mm and m18 x 1. 5mm o2 sensor rethread tools, and a 22mm 1/2-inch Drive Deep Offset O2 Sensor Socket. Quality: all tools in this 10-piece oxygen Sensor Socket Set are constructed of high strength Chrome Vanadium Steel with a Manganese Phosphate coating to resist corrosion. With your support, you realize they are more than a pet, we’re proud to help this great organization. If you have a pet, they are part of the family. You are backed by our Performance Assurance Limited Lifetime Warranty.

Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. If you have any issues with your areS Oxygen Sensor Socket Set, parts, simply contact customer service for troubleshooting help, replacement, or refund. Storage: this oxygen sensor socket set comes complete with convenient storage case so you'll never misplace a socket on the job again! Reliable | effective | efficient: users trust ares to be quality tools.
BrandARES #ad
ManufacturerARES #ad
Part Number7031870319703207032170322703237032770325
WarrantyPerformance Assurance Limited Lifetime Warranty

6. Vector Tools

#ad

5Pc Set Oxygen Sensor Socket Wrench and Thread Chaser Set

#ad
Vector Tools #ad - Offset crowfoot socket wrench 1-15/16” long, 1-pc M18 x 1. 5mm and 1-pc M12 x 1. 25mm thread chasers with 3/8” drive to clean and repair damaged threads.

Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines. Low-profile crowfoot socket wrench 1-1/4” long, 1-pc 1/2” Dr. Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires. Set includes: 1-pc 3/8” dr. Extra deep broach socket 3-1/8” long, 1-pc 3/8” dr. 3 different types of sockets cover various situations of oxygen sensor locations. Universal 6-point 7/8” 22mm socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
BrandVector Tools #ad
ManufacturerJ&R Quality Tools #ad
Height4 Inches
Length6 Inches
Weight2 Pounds
Width3 Inches
Part Number20764
Model13

7. ARES

#ad

Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, ARES 70039-3/8-Inch Drive by 7/8-Inch 22mm Offset Oxygen Sensor Socket

#ad
ARES #ad - Quality: made from premium chrome molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. With your support, we’re proud to help this great organization. This oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots.

You are backed by our Performance Assurance Limited Lifetime Warranty. This tool meets and exceeds ANSI/ASME standards. Ares offers a full line of oxygen sensor tools including our complete 70318 oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more! Why you need it: even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time! Reliable | effective | efficient: users trust ares to be quality tools.

Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. Design: this socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. If you have any issues with your areS Offset Oxygen Sensor Socket, replacement, parts, simply contact customer service for troubleshooting help, or refund.
BrandARES #ad
ManufacturerARES #ad
Height1 Inches
Length5.8 Inches
Weight0.35 Pounds
Width2.71 Inches
Part Number70039
Model70039
WarrantyPerformance Assurance Limited Lifetime Warranty

8. ABN

#ad

ABN Oxygen Sensor Socket Set – 10 Piece O2 Sensor Socket Set Oxygen Sensor Removal Tool Set 1/2in and 3/8in Sq Drive

#ad
ABN #ad - Contents: this specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6pt x 110mm, 1/2 inch dr x 28mm x 12pt x 78mm, 3/8 inch dr x 7/8” x 6pt x 80mm, 1/2 inch dr x 22mm x 12pt x 78mm, 3/8 inch dr x 7/8” x 30mm, 1/2 inch dr x 29mm x 6pt x 90mm, 3/8 inch dr x 7/8” x 6pt x 90mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, and 3/8 inch dr x 1” and 1-1/6” x 74mm.

Remove oxygen sensors from your vehicle: the abn 10 piece specialty sockets o2 sensor Tool Set lets you quickly and easily remove oxygen sensors, fuel injectors, oil pressure sending unit, and vacuum switches; Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes; Remove and install parts on most domestic and some international vehicles.

Built to last: constructed of heat-treated chrome vanadium steel, durability, this oxygen sensor remover set is built for strength, and longevity; Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion. Convenient storage: the plastic blow-molded case is included to provide safe storage, fast organization, and easy transportation; Case measures at 11. 8 x 9. 8 x 2. 5 inches 29. 9 x 24. 9 x 6.
BrandABN #ad
ManufacturerABN #ad
Height2.5 Inches
Length11.8 Inches
Weight6.39 Pounds
Width9.8 Inches
Part Number4138
WarrantyThis product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

9. CARTMAN

#ad

Cartman Automotive Oxygen Sensor Socket Set 7PC Socket Set

#ad
CARTMAN #ad - Oil rubbed Black oxide coating for corrosion resistance. 7 pc sensor and sending unit socket set. Designed for the removal and installation of oxygen sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes. Blow mold case for storage. Chrome vanadium steel construction.
BrandCARTMAN #ad
ManufacturerCartman #ad
Part NumberCM-BRD-417
Model10

10. 8MILELAKE

#ad

8MILELAKE 21pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

#ad
8MILELAKE #ad - Features extended and reinforced socket body removes the most stubborn sensors without rounding them off. 7/8inches short low profile o2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket. Most comprehensive kit available. 21pcs sensor oil pressure sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen. Automotive 6pt and 12pt sensor sockets set for installing and removing oxygen sensors, injectors and thermal switches. Universal vacuum switch PVS, TVS Socket Tool.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height11.42 Inches
Length15.35 Inches
Weight11.02 Pounds
Width3.15 Inches
Part NumberSZ
ModelSocket