As an Amazon Associate I earn from qualifying purchases.
HPS Performance #ad - Red light weight 2. 3 ft/lbs. 6 whp horsepower, +9. Fit type: vehicle specific fit. Heavy duty powder coated steel heat shield blocks out heat from engine and delivers maximum cooling effect.
Torque and improve throttle response; Does NOT require tuning after the install. Fine-tuned by hps to deliver dyno proven performance gains +7.
DNA MOTORING #ad - Micro cotton gauze type filter material, washable with water or soup, and reusable. Increases 5-10 hps horsepower, 6-8% power of torque, and improve the gas mileage. Lightweight high air flow racing performance. Performance: Improves up to 95% filtration efficiency.
GOOACC #ad - Save time and money - you can find 240pcs automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
All the necessary retainers for exact replacement of old and broken retainer. Universal fit kit - great assortment push retainer kit with 12 popular size, Chrysler, Toyota, GM, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, fitting for door trim, Honda and more.
K&N #ad - Dyno tested: dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required. High quality: Made in America. Easy to install: bolt-on power in less than an hour with basic hand tools.
K&n air intake systems are one of the easiest ways to guarantee an increase in horsepower. Improved engine sound: Hear the power under the hood. World class protection: Pushing the limits of engine protection by protecting your engine from harmful contaminants.
nibbi #ad - It can be used to lengthen the air intake duct to fit the body of the motorcycle, and it can be used where there are not enough places or where extension is needed. This is a curved aluminum pipe. Please contact us if you have any questions, Nibbi will always be your trusted partner.
K&N #ad - Guaranteed increase in horsepower: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube. Racetrack approved: the official Air Filter of NASCAR. Improved engine sound: Hear the power under the hood.
World class protection: Pushing the limits of engine protection by protecting your engine from harmful contaminants. Ultimate longevity: 10-year/Million Mile Limited Warranty protects for the life of your vehicle.
Trusted on the racetrack—made for your vehicle. Easy to install: bolt-on power in less than an hour with basic hand tools. High quality: Made in America. Easy maintenance: no filter cleaning required for up to 100, 000 miles. K&n air intake systems are one of the easiest ways to guarantee an increase in horsepower.
G-PLUS #ad - Inlet / outlet size: 2 3/8". Perfect Fit. Max horsepower Capacity: 500hp+. Vehicle tested. 50 % + more volume air Flow Then Oem Intercooler. 1 year Manufacturer Warranty. Replacement for bmw 1 series f20 116i / 3 series f30 f31 / 2 Series F22 F23 / 4 Series F32 F33.
K&N #ad - Guaranteed increase in horsepower: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube. K&n air intake systems are one of the easiest ways to guarantee an increase in horsepower.
Better towing: improves acceleration and uphill performance when towing by improving throttle response. Dyno tested: dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required.
Racetrack approved: the official Air Filter of NASCAR. Easy to install: bolt-on power in less than an hour with basic hand tools. Improved engine sound: Hear the power under the hood. World class protection: Pushing the limits of engine protection by protecting your engine from harmful contaminants. Trusted on the racetrack—made for your vehicle.
PARTOL #ad - Can washable and reusable. Air filter features dry density fibers which can obstruct foreign materials entering the engine. This air intake hose is designed for horsepower increase, it universally fit for any 76mm / 3inch air intake hose.
This air intake kit system is the complete solution to optimize throttle response and generate explosive horsepower output. Universal cold air intake induction kit, please measure the diameter of the exhaust pipe of your vehicle before purchase to make sure your exhaust pipe is 3 inch and have enough space to install.
High air flow with excellent filtration. Carbon surface, a stainless air filter will last the life of your automobile. Wide application, also applicable to air intake systems on modified on modified vehicles.
1. HPS Performance
#adHPS Performance Red Shortram Air Intake Kit + Heat Shield Cool Ram Compatible for 2014-2015 Ford Fiesta ST 1.6L Turbo, 827-553R
#adTorque and improve throttle response; Does NOT require tuning after the install. Fine-tuned by hps to deliver dyno proven performance gains +7.
More information #ad
75" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Fits 2014-2015 ford fiesta st 1. Carb exempt: No. The included installation instruction has clear pictures and description to guide the installer throughout the whole process. No modification is required. 6l turbo.| Brand | HPS Performance #ad |
| Manufacturer | HPS Performance Products #ad |
| Weight | 9 Pounds |
| Part Number | 827-553R |
| Model | 827-553R |
| Warranty | 2 year manufacturer warranty |
More information #ad
2. DNA MOTORING
#adRed, DNA MOTORING AIPBK-CC57L-RD Short Ram Air Intake System
#adMore information #ad
| Brand | DNA MOTORING #ad |
| Manufacturer | DNA motoring #ad |
| Height | 9 Inches |
| Length | 17 Inches |
| Width | 11 Inches |
| Part Number | AIPBK-CC57L-RD |
| Model | AIPBK-CC57L-RD |
More information #ad
3. Rtunes Racing
#adRtunes Racing Short Ram Air Intake Kit + Filter Combo RED Compatible For 04 05 06 07 Honda Accord2.4L L4 SULEV
#adRtunes Racing #ad - All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture. High quality built Washable and Reusable Air Filter as shown in the picture.More information #ad
The air intake kit can help your engine to draw more cold air resulting in better throttle response and higher explosive horsepower output. No additional parts will be needed for installation after you purchase this kit. Item condition: Brand New.| Brand | Rtunes Racing #ad |
| Manufacturer | Rtunes Racing #ad |
| Part Number | SI-HD-12RD |
More information #ad
4. GOOACC
#adGOOACC 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler
#adAll the necessary retainers for exact replacement of old and broken retainer. Universal fit kit - great assortment push retainer kit with 12 popular size, Chrysler, Toyota, GM, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, fitting for door trim, Honda and more.
More information #ad
High quality - high quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use. Compact size, convenient to store or carry with in your car. Easy storage - comes with a plastic box with 12 compartments for organized storage. Most common sizes - don not worry about lost or damaged body fasteners.| Brand | GOOACC #ad |
| Manufacturer | GOOACC #ad |
| Part Number | GRC-33 |
| Model | GRC-33 |
| Warranty | 2 Years Warranty |
More information #ad
5. K&N
#adK&N Cold Air Intake Kit: High Performance, 2.4L L4, Increase Horsepower: Compatible with 2013-2017 Honda Accord, 69-1213TS
#adK&n air intake systems are one of the easiest ways to guarantee an increase in horsepower. Improved engine sound: Hear the power under the hood. World class protection: Pushing the limits of engine protection by protecting your engine from harmful contaminants.
More information #ad
Better towing: improves acceleration and uphill performance when towing by improving throttle response. Easy maintenance: no filter cleaning required for up to 100, 000 miles. Guaranteed increase in horsepower: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube. Ultimate longevity: 10-year/Million Mile Limited Warranty protects for the life of your vehicle.| Brand | K&N #ad |
| Manufacturer | K&N Engineering #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 7.28 Pounds |
| Width | 0 Inches |
| Part Number | 69-1213TS |
| Model | 69-1213TS |
| Warranty | 1,000,000 Miles |
More information #ad
6. nibbi
#adNIBBI High Performance Air Filter Intake Curve Pipe Air Filter Elbow Air Intake Pipe Air Intake Elbow For GY6 Engine
#adMore information #ad
This is an air intake pipe specially manufactured by Nibbi. It does not have any effect on the exhaust emissions of motorcycles, and it will not affect the power system and it does not participate in emissions.| Brand | nibbi #ad |
| Part Number | Curve Pipe-01 |
More information #ad
7. K&N
#adYukon Denali, Yukon, K&N Cold Air Intake Kit: High Performance, Guaranteed to Increase Horsepower: Fits 2014-2020 Chevy/GMC/Cadillac Silverado 1500, Tahoe, Escalade V8,63-3082, Suburban, Sierra 1500
#adWorld class protection: Pushing the limits of engine protection by protecting your engine from harmful contaminants. Ultimate longevity: 10-year/Million Mile Limited Warranty protects for the life of your vehicle.
More information #ad
Dyno tested: dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required. Better towing: improves acceleration and uphill performance when towing by improving throttle response. Trusted on the racetrack—made for your vehicle. Easy to install: bolt-on power in less than an hour with basic hand tools. High quality: Made in America. Easy maintenance: no filter cleaning required for up to 100, 000 miles. K&n air intake systems are one of the easiest ways to guarantee an increase in horsepower.
| Brand | K&N #ad |
| Manufacturer | K&N #ad |
| Height | 14.49 Inches |
| Length | 24.09 Inches |
| Weight | 13.22 Pounds |
| Width | 15.51 Inches |
| Part Number | 63-3082 |
| Model | 63-3082 |
| Warranty | 1,000,000 Miles |
More information #ad
8. G-PLUS
#adBolt On Front Mount Performance Intercooler Kit Replacement For BMW 1 Series F20 116i / 2 Series F22 F23 / 3 Series F30 F31 / 4 Series F32 F33 Black
#adMore information #ad
| Brand | G-PLUS #ad |
| Manufacturer | Gplusmotor #ad |
| Weight | 23.48 Pounds |
| Part Number | 02OCB0003FBK |
| Warranty | 1 year warranty |
More information #ad
9. K&N
#adK&N Cold Air Intake Kit: High Performance, Guaranteed to Increase Horsepower: 50-State Legal: Fits 2011-2014 Ford F150, 3.5L V6,57-2583
#adBetter towing: improves acceleration and uphill performance when towing by improving throttle response. Dyno tested: dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required.
More information #ad
Easy maintenance: no filter cleaning required for up to 100, 000 miles. High quality: Made in America. Ultimate longevity: 10-year/Million Mile Limited Warranty protects for the life of your vehicle. Racetrack approved: the official Air Filter of NASCAR. Easy to install: bolt-on power in less than an hour with basic hand tools. Improved engine sound: Hear the power under the hood. World class protection: Pushing the limits of engine protection by protecting your engine from harmful contaminants. Trusted on the racetrack—made for your vehicle.
| Brand | K&N #ad |
| Manufacturer | K&N Engineering #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 11.97 Pounds |
| Width | 0 Inches |
| Part Number | 57-2583 |
| Model | 57-2583 |
| Warranty | LIMITED WARRANTY |
More information #ad
10. PARTOL
#adUniversal Cold Air Intake Induction Kit Aluminum Air Intake Pipe Hose With Filter, Blue, Partol 3" Cold Air Intake Pipe
#adThis air intake kit system is the complete solution to optimize throttle response and generate explosive horsepower output. Universal cold air intake induction kit, please measure the diameter of the exhaust pipe of your vehicle before purchase to make sure your exhaust pipe is 3 inch and have enough space to install.
More information #ad
Please verify that this part fits your vehicle before you purchase. The aluminum injection pipe coupled with the funnel-shaped air filter allow cold airflow channeling leading to minimal intake turbulence, air speed boosting and, in turn, creating pure horsepower and improving fuel / gas mileage. High air flow with excellent filtration. Carbon surface, a stainless air filter will last the life of your automobile. Wide application, also applicable to air intake systems on modified on modified vehicles.
| Brand | PARTOL #ad |
| Manufacturer | Partol #ad |
| Weight | 1.76 Pounds |
| Part Number | QP0B01L47U6 |
More information #ad
