As an Amazon Associate I earn from qualifying purchases.
Hengs Industiries #ad - Easy installation. Fits select Heng's exhaust vent kits. 9" fan blade. Quick and easy installation. Easily replaceable without compromising the rooftop seal.
Heng's #ad - 9" blades. Dimensions: 13. 5" x 13. 5" x 3. 5". Fast and easy installation with a Phillips screwdriver. Universal fit for Elixir, Ventline, Jensen, and Heng's.
Heng's #ad - Also works on non-power Vents With Some Simple Wiring. Replaces old ineffecient Fans With New High Velocity Fan. No need to risk the roof Seal By Replacing The Entire Vent. Can be retrofitted To Any Existing Vent. Can be done easily with Only A Phillips Screwdriver Instructions Included.
Maxx Air #ad - Fan runs with lid closed to circulate air Ceiling Fan Mode. Installs into all standard 14 inch x 14 inch RV roof openings. Remote control not included.
RUSFOL #ad - Decide your rotation: the direction of spin is determined by looking down through the motor, which allows turning in both clockwise or counterclockwise. Compatibility: the 6" fan blade fits for heng's, and jensenpre-1995 range hood roof vents and range hoods or any 12 Volt motor with a 0094-inch round-shaped shaft.
And the motor compatible with heng's, Ventline, Elixir, Elixir, Ventline pre-1995, Jensen and similar 6-inch fan blades. And all our motor had been tested before you got it, we care a lot about your device safety. And the vent fan motor has reverse polarity, just reverse the wires on the motor.
5” individual blades; 1. 75” diameter center bore plate; 2/25” diameter center round bore hole; motor1/8” diameter x 3/5” length half-moon D-shaped shaft; 1-2/5” diameter x 2-1/5” length body;, 1 year replacement warranty! Keep good air quality: using our motor with fan on your rv, can effectively exhaust lingering smells in the bathroom and built-up moisture, provide a healthy environment for you! Long lifespan: the fan blade made of durable plastic which can resist rust and corrosion, and last for a long time.
Fan-Tastic Vent #ad - Rain sensor that automatically closes when the dome gets wet. Fits standard 14" x 14" openings. Built-in thermostat; High profile base. Manual lift dome; Quiet operation. Three fan blade speeds; Reversible air flow.
1. Hengs Industiries
#ad90046-CR Vortex II Replacement Fan Kit 501.1099 , White, Hengs Industiries
#adMore information #ad
| Brand | Hengs Industiries #ad |
| Manufacturer | Heng's #ad |
| Height | 6 Inches |
| Length | 16 Inches |
| Width | 16 Inches |
| Part Number | 90046-CR |
| Model | 90046-CR |
More information #ad
2. Heng's
#adHeng's 90043-CR Replacement Vortex I Fan
#adHeng's #ad - 9" fan blade. Fits heng's Vortex I vents. Note : this replacement will only work on vents that are around the dates of 2010-2018. Easy installation.More information #ad
| Brand | Heng's #ad |
| Manufacturer | Heng's #ad |
| Height | 3.5 Inches |
| Length | 14.13 Inches |
| Weight | 3.82 Pounds |
| Width | 14.13 Inches |
| Part Number | 90043CR |
| Model | 90043-CR |
More information #ad
3. Heng's
#adVortex Ii Vent Fan Upgrade
#adMore information #ad
| Brand | Heng's #ad |
| Manufacturer | HENG'S #ad |
| Height | 3.5 Inches |
| Length | 13.5 Inches |
| Weight | 4 Pounds |
| Width | 13.5 Inches |
| Part Number | 90046-CR |
| Model | 90046-CR |
More information #ad
4. Heng's
#adHeng's 90043-CR Vortex Fan Replacement Kit
#adHeng's #ad - Just replace your existing screen with the Vortex upgrade kit. Don't just move air; 7 inch height x 17 inch Width x 17 inch length. Make your outdated vent more powerful without buying a whole new and expensive vent.More information #ad
Inefficient powered vent easily without replacing the entire vent or compromising the rooftop seal. Create a vortex update your old; Single Speed with 9 Inch blade.| Brand | Heng's #ad |
| Manufacturer | Heng's #ad |
| Height | 3.5 Inches |
| Length | 14.13 Inches |
| Weight | 1 Pounds |
| Width | 14.13 Inches |
| Part Number | 90043-CR |
| Model | 90043-CR |
More information #ad
5. Heng's
#adVortex High Velocity RV Roof Vent Retrofit Kit
#adMore information #ad
| Brand | Heng's #ad |
| Manufacturer | Hengs Industries #ad |
| Part Number | 90043 |
| Model | 90043 |
More information #ad
6. Heng's
#adHeng's New Vortex I White Single Speed 12V 12 Volt RV Camper Motorhome Ceiling Vent Fan Replacement Upgrade KIT Model 90043-CR
#adHeng's #ad - New vortex have a pre-stamped cut-out in the housing for the fuse necessary for Canada. This is not a factory defect, please see photos**. Heng's single speed vortex i fan insert Not Complete Roof Vent - NO Interior Garnish Ring.More information #ad
12 volt single speed fan motor 9' fan blade On/Off Switch Push Button Style 1. 8 amps of power required. Screen removable fine mesh screen included cRANK HANDLE Manual Crank Style Handle Included You must install this.| Brand | Heng's #ad |
| Manufacturer | HENGS #ad |
| Part Number | 8078545 |
More information #ad
7. Maxx Air
#adMaxxair 00-04000K 12V Roof Top Fan/Vent
#adMore information #ad
White lid, manual opening. Remote control models now include backup controls at ceiling, a MaxxFan exclusive. Flush mounted, thermostat, easy to clean keypad controls fan speed, air intake and exhaust.| Brand | Maxx Air #ad |
| Manufacturer | Maxxair #ad |
| Height | 10 Inches |
| Length | 17.4 Inches |
| Weight | 12 Pounds |
| Width | 17.2 Inches |
| Part Number | 00-04000K |
| Model | 00-04000K |
More information #ad
8. RUSFOL
#adVentline, Elixir, Jensen RV, 6" Replacement White RV Vent Fan Blade with 12V D-Shaft RV Vent Motor,Compatible with Heng's
#adAnd the motor compatible with heng's, Ventline, Elixir, Elixir, Ventline pre-1995, Jensen and similar 6-inch fan blades. And all our motor had been tested before you got it, we care a lot about your device safety. And the vent fan motor has reverse polarity, just reverse the wires on the motor.
More information #ad
You can determine the direction yourself if it rotates in the wrong direction, at the top of the blade. Only for RV! Please compare this unit measurements with your current exhaust fan motors to ensure exact fit. Dimension: fan shade6”overall diameter :2” x 1. 5” individual blades; 1. 75” diameter center bore plate; 2/25” diameter center round bore hole; motor1/8” diameter x 3/5” length half-moon D-shaped shaft; 1-2/5” diameter x 2-1/5” length body;, 1 year replacement warranty! Keep good air quality: using our motor with fan on your rv, can effectively exhaust lingering smells in the bathroom and built-up moisture, provide a healthy environment for you! Long lifespan: the fan blade made of durable plastic which can resist rust and corrosion, and last for a long time.
| Brand | RUSFOL #ad |
| Manufacturer | RUSFOL #ad |
| Part Number | RU019 |
| Model | RU019 |
More information #ad
9. Fan-Tastic Vent
#adFan-Tastic Vent RV Roof Vent with Thermostat, Model 3350, Manual and Automatic Speed 12 Volt RV Vent Fan, White, Smoke Dome RV Vent Cover
#adMore information #ad
| Brand | Fan-Tastic Vent #ad |
| Manufacturer | Dometic USA #ad |
| Height | 12 Inches |
| Length | 14 Inches |
| Weight | 11 Pounds |
| Width | 10.5 Inches |
| Part Number | 803350 |
| Model | 803350 |
More information #ad
10. Maxx Air
#adMaxxair 00-05100K MaxxFan Ventillation Fan with White Lid and Manual Opening Keypad Control
#adMaxx Air #ad - Includes a powerful 3-speed fan. 10 fan speeds; Intake and exhaust. It has controls at ceiling. Built-in Rain shield. Maxxfan, a new, one-of-a kind ventilator system that protects your RV interior always in any weather rain or shine.More information #ad
Thermostat. Easy to remove interior insect screen, simply rotate four retaining knobs to remove for cleaning. A complete all in one system that fits standard 14 inch x 14 inch.| Brand | Maxx Air #ad |
| Manufacturer | Maxxair #ad |
| Height | 11.9 Inches |
| Length | 25.5 Inches |
| Weight | 18.6 Pounds |
| Width | 19.5 Inches |
| Part Number | 0005100K |
| Model | 00-05100K |
More information #ad
