Top 7 NMO Antenna Mount – Two-Way Radio Accessories

As an Amazon Associate I earn from qualifying purchases.

1. BTECH

#ad

And Cars Multi Axis Adjustable; Includes 20' of RG-58A/U Cable with a PL-259 Connector Includes Rain Cap, Nagoya RB-700N Heavy Duty Universal NMO Lip Mount for Trucks, Hatchbacks, SUVs

#ad
BTECH #ad - 2 axis adjustable 360 rotation base, Heavy duty Recommended for larger antennas Trunk / Lip / Hatchback Mount. Rubber pads on the lip mount protect your vehicle from rubbing directly to the mount. No holes or drilling required. Includes: rb-700n with 20ft of rb-58a/u cable pl-259 connects to SO-239, Two Allen Wrenches, Rain Cap. Certified original nagoya Antenna Mount - with an exclusive manufacturing partnership with BTECH.
BrandBTECH #ad
ManufacturerBTECH #ad
Height0.1 Inches
Length17 Inches
Weight0.09 Pounds
Width0.5 Inches
Part NumberNagoya RB-700N
ModelNagoya RB-700N

2. Midland

#ad

Midland, MXTA12 Antenna Mag Mount with NMO Connector and 12' Cable, Works with Midland MicroMobile MXT105, MXT400, MXT115, MXT275

#ad
Midland #ad - Antenna not included. Cable length: 12 ft Silver. For use with microMobile antennas. Cable type: rg-58A/U. Includes rubber boot. Specific frequency: 0 - 1000 MHz.
BrandMidland #ad
ManufacturerMidland Radio Corporation #ad
Part NumberMXTA12
Model8542133165

3. Tram

#ad

Tram 1290 Rain Cap

#ad
Tram #ad - Fits all Nmo mounts. Protects mounts when antenna is taken off. Black heavy-duty plastic. O-ring type Gasket.
BrandTram #ad
ManufacturerPetra Industries (sports) #ad
Height1 Inches
Length3.15 Inches
Weight0.03 Pounds
Width3.15 Inches
Part Number1290
Model1290
WarrantyAs Labeled

4. Superbat

#ad

Superbat Nmo Antenna Mount to PL-259UHF Male Cable RG58 1M Extension Cable with L-Bracket + SO239 to BNC Adapter + SO239 Coupler for Yaesu Kenwood HYT Vertex Icom Trunk Mobile Radios 1PS

#ad
Superbat #ad - Work for wouxun, used for antennas, cb radio handheld & amateur radio equipment, ham radio Transceiver, Uniden Base/Mobile Scanner scanners, Linton etc Two-Way Radio, radio Scanner, coaxial cable, Baofeng, Quasheng, for UHF VHF Coax NMO Mount Cable Car Truck Hood install by tram-browning.

Cable type: connector a: uhf plug, male pin | Connector B: NMO Mount | Impedance: 50 Ohm. Cable type: impedance: 50 ohm | rf cable type: RG58 | Cable Length: 1m/3. 28". We are confident in the quality of our Cable and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. Type:pl259uhf male to nmo mount coax cable + nmo l-bracket + sO239 to BNC Adapter + SO239 Coupler Connector KIT. Never worry about any security problems. If you unfortunately get a defective one, please contact our customer support.
BrandSuperbat #ad
Manufacturerwlaniot #ad
Part NumberGP-KIT-HAM-06

5. AEcreative

#ad

AEcreative Low Profile NMO Mount Wide-Band Mobile Scanner Receive Antenna Whip for Uniden Bearcat RadioShack Motorola

#ad
AEcreative #ad - Package include: 1x nmo type antenna whip, NMO antenna base not included. Low-profile antenna whip, Fit Motorola NMO type antennat base. Receive frequency: 50mhz - 1200 MHz, antenna overall height: 4".
BrandAEcreative #ad
ManufacturerAEcreative #ad

6. Comet Antennas

#ad

Comet Antennas DG2ANTPF Vehicle Specific Fender Bracket Antenna Mount No Holes to Drill for Dodge Trucks

#ad
Comet Antennas #ad - 3/4″ hole accepts the standard nmo mount, or choose a comet so-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole.

Note: for stability, our brackets are made of 14 gauge stainless steel. Most nmo mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place. The larsen nmoK mount does not have any problem. Drivers side installation only. Fits these vehicles: dodge ram 1500: 2009-2018, 3500: 2010-2018, ram 2500, ram chassis cab: 4500, 5500: 2011-2018. Uses the existing fender bolt, the bracket fits between the hood and fender gap.
BrandComet Antennas #ad
ManufacturerDG2ANTPF #ad
Weight0.3 Pounds
Part NumberDG2ANTPF
ModelDG2ANTPF

7. Rugged Radios

#ad

Rugged Radios 1.75" Diameter Bar Clamp and Horizontal Mount for Antennas & GoPro Cameras

#ad
Rugged Radios #ad - 1. 75" diameter Bar Mount. Can be used with gopro Cameras with Tripod Mount not included. 2 possible Positions for Mounting. Includes horizontal Mount for 3/8" NMO Antennas.
BrandRugged Radios #ad
ManufacturerRugged Radios #ad
Part NumberAMH-1.75
ModelAMH-1.75