As an Amazon Associate I earn from qualifying purchases.
Magnet Paint & Shellac #ad - Designed to deliver trouble-free, consistent performance. Made from high-quality materials for ultimate durability. Right for your vehicle and lifestyle.
KBS Coatings #ad - Rustseal applications includes chassis, heavy transport, axles, floor pans, steam pipes, boat chain lockers, boat fuel tanks, engines, hand rails, boat bilges, Concrete Sealing, Wheel wells, Lawn equipment, Suspension parts, boat decks, appliances, Air conditioning repair, fenders, support beams, fuel & waste-water treatment tanks, boat heat exchangers, Fiberglass repair, Boat trailers, Frame, Boat engine rooms, Rebar coating, springs, Car Doors, Garage floors, Boat pumps, Boat masts, Pipe work, Trunks, Roof drains, Boat hulls, Steel roof, Lead-based paint encapsulation and so much more.
Rustseal is much more durable than powder coating. Rustseal will withstands temps up to 600°F 316°C and RustSeal is VOC compliant. Rustseal will not crack, oils, chip, flake or peel. Rustseal is ideal for a brush, roll or spray application. Rustseal has superior flow and leveling properties. Rustseal is a waterproof coating strengthened by repeated exposure to moisture. Rustseal has high abrasion and chemical resistance make it ideal for thousands of applications.
More than 350 townships, highway, public works departments and local DOT fleet maintenance facilities use CHASSIS SAVER for protection of snow and ice removal equipment, off road and general vehicle maintenance.
Extensively used on snow and ice removal equipment saving thousands of dollars in costly repairs.
It dries to touch in 30-60 minutes. Por-15 top coat can take 3-4 days to reach maximum hardness, wax, grease, oil, soap, and longer in temperatures below 55°F 15°C. When do i need this? - por-15 top coat is essential for that extra layer of durability and provides optimum protection against UV light that won’t fade over long term exposure.
Our direct-to- metal coating is essential in all applications where there is a need to help preserve substrates susceptible to corrosion. Known for the unbeatable 3-step stop rust system, quality control, POR-15 is trusted by DIY & Professionals. It can be applied directly to metal substrates or previously painted surfaces without need for primer or undercoat. Application - all surfaces must be clean and free of all dirt, loose rust, loose paint & any other matter.
Known for the unbeatable 3-step stop rust system, POR-15 is trusted by DIY & Professionals. Stir por-15 rust preventive Coating thoroughly, oil, typically 2 to 5 hours. Once cured, the coating forms an indestructible, hammer tough finish.
May be recoated or top coated when dry to the touch, do not shake. It has the opposite chemistry of ordinary paints. Our coating has excellent surface tolerance on porous surfaces, such as wood, commercial marine, and construction industries all use POR-15 Rust Preventive Coating to protect valuable equipment against rust, concrete, industrial, and more!. Cured by moisture – the secret strength lies in the curing process.
Eastwood #ad - Eastwood extreme chassis Black Satin Qt Improves Corrosion Scratches Resistant. Apply multiple coats without lifting. 85% + gloss Level. Matches OEM automotive paint. Helps seal rust and improves resistance against chips and scratches.
1. Magnet Paint Co
#adAntique Satin Black, Magnet Paint Co. UCP970-04 Chassis Saver 1 Quart Can Rust Preventive Truck and Auto Underbody Coating
#adMagnet Paint Co #ad - Optimum results can be achieved by sandblasting a medium blast profile to surfaces. High solids, voc compliant, single component chassis paint and underbody coating.More information #ad
| Brand | Magnet Paint Co #ad |
| Manufacturer | Magnet Paint Co. #ad |
| Height | 5 Inches |
| Length | 6 Inches |
| Weight | 2 Pounds |
| Width | 5 Inches |
| Part Number | UCP970-04 |
| Model | UCP970-04 |
More information #ad
2. Magnet Paint & Shellac
#ad1 Gallon, Satin Black, Magnet Paint UCP970-01 Chassis Saver Rust Preventative Paint
#adMore information #ad
Manufactured to meet or exceed strict quality requirements. If you have any questions or need fitment information for your vehicle, please contact with us.| Brand | Magnet Paint & Shellac #ad |
| Manufacturer | Magnet Paint & Shellac #ad |
| Height | 7 Inches |
| Length | 7 Inches |
| Width | 8 Inches |
| Part Number | UCP97001 |
| Model | UCP970-01 |
More information #ad
3. Eastwood
#adEastwood Chassis Black Satin Quarts Resists Corrosion Chips Scratches Solvents
#adEastwood #ad - Eastwood chassis black Satin Quarts Resists Corrosion Chips Scratches Solvents. Chasis black also resists brake fluid fuel and solvents, UV resistant. Resistant corrosion chips and scratches. Undercoating matches OEM finish. 25%-35% gloss Level.More information #ad
| Brand | Eastwood #ad |
| Manufacturer | Eastwood #ad |
| Weight | 2.38 Pounds |
| Part Number | 10043ZP |
More information #ad
4. KBS Coatings
#adProven Rust Prevention, Covers 50 Sq Ft, KBS Coatings 4402 Satin Black Rustseal -1 quart
#adMore information #ad
Rustseal forms permanent non-porous barrier against moisture and oxygen. Rustseal repels fuels, most acids & alkalis, and graffiti. Rustseal is much more durable than powder coating. Rustseal will withstands temps up to 600°F 316°C and RustSeal is VOC compliant. Rustseal will not crack, oils, chip, flake or peel. Rustseal is ideal for a brush, roll or spray application. Rustseal has superior flow and leveling properties. Rustseal is a waterproof coating strengthened by repeated exposure to moisture. Rustseal has high abrasion and chemical resistance make it ideal for thousands of applications.
| Brand | KBS Coatings #ad |
| Manufacturer | KBS Coatings #ad |
| Part Number | 4402 |
| Model | 4402 |
| Warranty | Quite simply, if one follows application instructions & applies proper mil thickness, and you don’t believe our products perform just as well if not better than the products you are currently using, we will refund your product purchase. |
More information #ad
5. Magnet Paint Co
#ad1 Gallon, Magnet Paint UCP99-01 Chassis Saver Rust Preventative Paint Gloss Black
#adMagnet Paint Co #ad - Application note: while chassis saver has incredible rust and corrosion resistance and can be used for all underbody applications without top coating, it is sensitive to UV light sun and its initial appearance will change over time.More than 350 townships, highway, public works departments and local DOT fleet maintenance facilities use CHASSIS SAVER for protection of snow and ice removal equipment, off road and general vehicle maintenance.
More information #ad
Chassis saver has proven itself over 10 years under the harshest conditions. Ucp99 gloss black as a primer or finish coat, under fenders, floor boards, trunk areas, rocker panels, behind bumpers, Chassis Saver has become the industry standard for high performance protection on all vintage truck and auto underbody surfaces including frames, fire walls, engine compartments, etc. Extensively used on snow and ice removal equipment saving thousands of dollars in costly repairs.
| Brand | Magnet Paint Co #ad |
| Manufacturer | Magnet Paint Co #ad |
| Height | 7 Inches |
| Length | 8 Inches |
| Width | 7 Inches |
| Part Number | UCP99-01 |
| Model | UCP99-01 |
More information #ad
6. POR-15
#adDirect to Metal Paint | Sheds Moisture & UV Light | Long-term Sheen & Color Retention, POR-15 Chassis Black Top Coat Paint -1 qt
#adPOR-15 #ad - Our satisfaction commitment – at por-15 we strive to bring the ultimate in rust prevention. Why choose por-15 chassis black top coat paint? – por-15 is an industry standard for high performance protection against corrosion and rust. Formulated to form a robust barrier that sheds moisture.It dries to touch in 30-60 minutes. Por-15 top coat can take 3-4 days to reach maximum hardness, wax, grease, oil, soap, and longer in temperatures below 55°F 15°C. When do i need this? - por-15 top coat is essential for that extra layer of durability and provides optimum protection against UV light that won’t fade over long term exposure.
More information #ad
Por-15 top coat provides excellent adhesion and best when used over POR-15 Rust Preventive Coating, works to provide a permanent barrier. Long lasting protection - por-15 top coat has exceptional long-term sheen and color retention, with a hammer tough finish that won’t crack or peel. Our direct-to- metal coating is essential in all applications where there is a need to help preserve substrates susceptible to corrosion. Known for the unbeatable 3-step stop rust system, quality control, POR-15 is trusted by DIY & Professionals. It can be applied directly to metal substrates or previously painted surfaces without need for primer or undercoat. Application - all surfaces must be clean and free of all dirt, loose rust, loose paint & any other matter.
| Brand | POR-15 #ad |
| Manufacturer | POR-15 #ad |
| Height | 5 Inches |
| Length | 4.25 Inches |
| Weight | 1 Pounds |
| Width | 4.25 Inches |
| Part Number | 45904 |
| Model | 45904 |
More information #ad
7. POR-15
#adPOR-15 Rust Preventive Paint, Rust Preventive Paint | Stop Rust & Corrosion Permanently | Anti-Rust Protective Barrier, 1 qt, Gloss Black
#adPOR-15 #ad - We are committed to innovation, quality control, and excellent customer service. Application - remove grease, minimum of two. Why choose por-15 rust preventive coating – por-15 is the gold standard in high performance coatings. No other paint, or even powder coat can match POR-15 Rust Preventive Coating when applied using the 3-Step Stop Rust System.Known for the unbeatable 3-step stop rust system, POR-15 is trusted by DIY & Professionals. Stir por-15 rust preventive Coating thoroughly, oil, typically 2 to 5 hours. Once cured, the coating forms an indestructible, hammer tough finish.
More information #ad
Our satisfaction commitment – at por-15 we strive to bring the ultimate in rust prevention. When do i need this – automotive, farm, bricks, abrasion, fiberglass, & corrosion. Unlike most paints that dry through evaporation, POR-15 Rust Preventive Coating dries faster when moisture is present. May be recoated or top coated when dry to the touch, do not shake. It has the opposite chemistry of ordinary paints. Our coating has excellent surface tolerance on porous surfaces, such as wood, commercial marine, and construction industries all use POR-15 Rust Preventive Coating to protect valuable equipment against rust, concrete, industrial, and more!. Cured by moisture – the secret strength lies in the curing process.
| Brand | POR-15 #ad |
| Manufacturer | POR-15 #ad |
| Height | 5 Inches |
| Length | 4 Inches |
| Weight | 2.2 Pounds |
| Width | 4 Inches |
| Part Number | 45004 |
| Model | 45004 |
| Warranty | As labelled |
More information #ad
8. Eastwood
#adEastwood Extreme Chassis Black Satin Qt Improves Corrosion Scratches Resistant
#adMore information #ad
| Brand | Eastwood #ad |
| Manufacturer | Eastwood #ad |
| Weight | 2.38 Pounds |
| Part Number | 11176ZP |
More information #ad
