Top 8 Smittybilt Hi Lift Jack Base – Jack Stands

As an Amazon Associate I earn from qualifying purchases.

1. ROCCS

#ad

ROCCS Jack ORB Off- Road Base Fit for Hi Lift Jack/Sky Jack/Trail Jack to Alleviate Jack Hoisting Sinkage

#ad
ROCCS #ad - With serrated teeth: use the teeth to level out the ground before Jacking, to create a clean, the jagged edge helps to scrape at hard dirt or gravel, flat surface for the base to sit on while in use. Easy to store and carry: it can be stored under the seats or put the Hi Lift Jack base in the trunk.

Also a drilled hole in center of base attached to your jack bar. Note: d0es not fit for smittybilt 2722 & hi lift Jack PP-300 Post Popper. This base was enough to keep the Hi-Jack from slipping and sinking into the mud while you are hoisting the vehicle. Compatibility: this off raod base compatible with most hi lift jacks, cast/steel jack, like All-Cast Jack, UTV Jack, x-tREME Jack, patriot edition jack, Equipment/Agriculture JackEJ-550.

Quality material & heavy duty: made of a tough pp synthetic material, thick and sturdy materials. Thick & bright color: the widened bottom plate is suitable for use on soft ground to prevent the jack from sinking and slipping; The bottom is hexagonal which increases the contact area between the base and the ground, it is more stable and does not slip during use. The red color is very easy to be found in the mud, you won't lose it.
BrandROCCS #ad
ManufacturerROCCS #ad
Height3 Inches
Length28 Inches
Weight3 Pounds
Width28 Inches
Part NumberHi-Lift Jack Base

2. Seven Sparta

#ad

Seven Sparta Off-Road Base Compatible with Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage Red

#ad
Seven Sparta #ad - Heavy duty and easy to carry: made of a tough pp synthetic material, better more than a chunk of wood will not rot or break. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass.

No-risk purchase! unconditional 30-day money-back guarantee. A drilled hole in center of base attached to your jack bar, store it easy. Compatible with most hi-lift jacks:designed and used for most of hi-lift jacks, cast/steel jack, Patriot Edition Jack, Includes model All-Cast Jack, UTV Jack, X-TREME Jack, Equipment/Agriculture JackEJ-550.

Do not fit for posT POPPER Jack. Give the off-road Base better footing and greater stability during the lifting process. One side with serrated teeth: helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price.
BrandSeven Sparta #ad
ManufacturerSeven Sparta #ad
Part NumberSeven Sparta-091401
ModelSeven Sparta-091401

3. Nerdllwin

#ad

Tough PP Pad to Alleviate Jack Hoisting Sinkage, Nerdllwin Off Road Base Compatible with Hi Lift Jacks Farm Jacks

#ad
Nerdllwin #ad - Compatible with most Hi-Lift Jacks / Farm Jacks. Warranty we offer12 Months Warranty for this item! Alleviates jack sinkage on Soft Surfaces like sand, grass, mud, making the lifting better stability. Product size: 29. 5x29. 5x7 cm, 1. 5kg. Rugged construction for strength and durability. The off road base was made of tough PP synthetic materials.
BrandNerdllwin #ad
ManufacturerNerdllwin #ad
Height3 Inches
Length12 Inches
Weight3.31 Pounds
Width12 Inches
Part NumberYS008

4. Smittybilt

#ad

2722", Smittybilt 54 Trail Jack

#ad
Smittybilt #ad - Color: Gray/Black. All hardware is zinc plated. Constructed of solid cast steel and finished in durable powder coat. Large base and adjustable connector clamp. 54 inches in height with a 4660lbs rated weight capacity.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height6 Inches
Length55 Inches
Weight6.82 Pounds
Width11 Inches
Part Number2722
Model2722

5. Seven Sparta

#ad

Seven Sparta Base Stand & Handle Keeper Compatible with Hi Lift Jack Accessories Handle Bar Protector

#ad
Seven Sparta #ad - Give the off-road Base better footing and greater stability during the lifting process. Handle keeper for securing jack: this handle bar is a must have item used to keep jack handle in place, when you install the jack in your truck bed or to the side during transportation and storage, especially off-roading or on the highway.

This handle bar keeper is crafted from durable rubber, which is rustproof and solid. Eliminate noise & friction: handle bar does eliminate rattling and avoids friction and rubbing between the Jack or truck body, no rattling while driving. Heavy duty & solid material: the jack stand is made of a tough PP synthetic material, better more than a chunk of wood will not rot or break.

Do not fit for posT POPPER Jack. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass. This set of handle keeper & jack base compatible with most jacks: designed and used for most of jacks, Includes model All-Cast Jack, X-TREME Jack, Patriot Edition Jack, UTV Jack, Cast/Steel Jack, Equipment/Agriculture JackEJ-550.
BrandSeven Sparta #ad
ManufacturerSeven Sparta #ad
Part NumberJack Base with Black Jack Handle-Keeper

6. Hi-Lift

#ad

Hi-Lift ORB Off Road Base

#ad
Hi-Lift #ad - Rugged construction for strength and durability. This item is not compatible with the First Responder Jack by Hi-Lift. Compatible with all standard Hi-Lift brand jacks. Alleviates jack sinkage on soft surfaces. Drilled hole in center of base for convenient storage on jack bar. Fit type: Universal Fit. Serrated teeth along one side helps scrape or level ground for base.
BrandHi-Lift #ad
ManufacturerHi-Lift #ad
Height3 Inches
Length12 Inches
Weight2.9 Pounds
Width12 Inches
Part NumberORB
ModelORB
Warranty12 months from the date of purchase, only to the original owner, against defective materials and workmanship.

7. CRMENO

#ad

CRMENO Off-Road Lifting Jack Base Prevent Jack Sinking Compatible with Hi Lift Jack 11.8x11.8inch

#ad
CRMENO #ad - Do not fit for posT POPPER Jack. The widened bottom plate is suitable for most of hi-lift jacks, utv jack, including model All-Cast Jack, X-TREME Jack, Cast/Steel Jack, Patriot Edition Jack, Equipment/Agriculture JackEJ-550.

Package includes: 1 x Off-Road Lifting Jack. Material: abs. Size: 300 x 300 x 71 mm11. 8 x 11. 8 x 2. 8inch, suitable for jack base within 4. 4inch. Give the off-road Base better footing and greater stability during the lifting process. Abs material has good toughness and load-bearing capacity, and its weight is lighter than iron base, it will not rust, and it is convenient to use and store. Serrated teeth along one side of the base allows you to scrape at hard soil or gravel and create a clean, flat surface to prevent the jack from sinking.
BrandCRMENO #ad
Manufacturerchenge #ad
Weight3.31 Pounds
Part NumberJK-0670

8. X-BULL

#ad

X-BULL Base for Hi Lift Jack Off-Road Base for Hi Lift Jack ,Heavy Duty Off-Road Lifting,PP Pad to Alleviate Jack Hoisting Sinkage Red

#ad
X-BULL #ad - Helps scrape hard dirt or gravel to have a clean, flat surface. Light weight and easy to carry: Made from a tough PP synthetic material, it doesn't rot or break like a hunk of wood.

Suitable for most types of lifting jacks, mud, designed and applied to most lifting jacks in order to relieve jacks from sinking on soft surfaces such as sand, and grass. During the lifting process, the off-road foundation is given a better foundation and greater stability during the lifting process. Made of a tough pp synthetic material, rugged structural strength and durability. Better than a piece of wood that won't rot or break. And this is high visibility red.
BrandX-BULL #ad
ManufacturerX-BULL #ad
Height2.8 Inches
Length11 Inches
Width11 Inches
Part NumberUSAM-XBHLJB001