As an Amazon Associate I earn from qualifying purchases.


Black braided ptfe fuel line can be used as fuel injection hose, eFI fuel line, fuel return line, carb fuel line, vacuum line, LS engine swap fuel line, turbo oil feed and boost line, transmission oil cooler line, vapor return line, fuel supply line and other high temperature high pressure applications.
Outside Diameter: 0543inch. Please measure before purchase! Fit for 8AN PTFE hose end fitting ONLY. Inner diameter: 13/32". Professional installation is highly recommended. Bursting pressure psi: 8000psi. 8an ptfe fuel injection fuel line length: 20 feet6m. Maximum working pressure psi: 2500 psi. Ptfe hose relatively hard, it can't be bend and folding in half.






1. ACDelco
#ad
ACDelco Specialty 32348 Multi-Port Fuel Injection Hose
#adACDelco #ad - Aramid reinforced spiral braid for superior burst strength. 225 psi working pressure rating. Recommended for any fuel injection applications for superior service life.More information #ad
Exceeds sae j30r14t2, except for kink resistance as well as low-permeation requirements for CARB. Has a thermoplastic barrier layer and an oil, heat, ozone, and abrasion resistant cover for enhanced durability.Brand | ACDelco #ad |
Manufacturer | ACDelco #ad |
Height | 3.3 Inches |
Length | 12.4 Inches |
Weight | 1.85 Pounds |
Width | 3.3 Inches |
Part Number | 32348 |
Model | 32348 |
Warranty | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details. |
More information #ad
2. ACDelco
#ad
ACDelco Professional 32104 25 ft Bulk Reel of 3/8 in Fuel Line/PCV/EEC Hose
#adACDelco #ad - Warning: do not use for pressure lines on fuel injected engines or for cooling system applications. Use an acdelco specialty Premium Fuel Injection Hose MPI for fuel injection applications. Nbr-pvc cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.More information #ad
Vacuum rating of 24 in/hg for sizes less than 1/2 in I. D. And 10 in/hg for sizes 1/2 in to 3/4 in I. D. At ambient temperatures. Intended for use with fuels where MTBE concentrations are no greater than 15% by volume. Nitrile tube that is spiral reinforced for enhanced durability.Brand | ACDelco #ad |
Manufacturer | ACDelco #ad |
Height | 1.4 Inches |
Length | 6.5 Inches |
Weight | 3 Pounds |
Width | 1.4 Inches |
Part Number | 32104 |
Model | 32104 |
Warranty | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details. |
More information #ad
3. EVIL ENERGY
#ad
EVIL ENERGY 8AN PTFE E85 Hose Braided Fuel Injection Line 20FT Nylon Stainless Steel Black Hose ID: 0.394 Inch
#adEVIL ENERGY #ad - Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. An-8 nylon and stainless steel braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances.Black braided ptfe fuel line can be used as fuel injection hose, eFI fuel line, fuel return line, carb fuel line, vacuum line, LS engine swap fuel line, turbo oil feed and boost line, transmission oil cooler line, vapor return line, fuel supply line and other high temperature high pressure applications.
More information #ad
Outside Diameter: 0543inch. Please measure before purchase! Fit for 8AN PTFE hose end fitting ONLY. Inner diameter: 13/32". Professional installation is highly recommended. Bursting pressure psi: 8000psi. 8an ptfe fuel injection fuel line length: 20 feet6m. Maximum working pressure psi: 2500 psi. Ptfe hose relatively hard, it can't be bend and folding in half.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Part Number | EV-00422BK-6 |
More information #ad
4. Gates
#ad
Gates 27348 Barricade Fuel Injection Hose-15' Length, Inner Diameter 5/16"
#adGates #ad - Multi-fuel compatibility. Extremely low permeation rate. Hnbr tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Oil, ozone, heat, and abrasion-resistant cover. Meets sae 30r14 t2 except for kink resistance, CARB and EPA non-road fuel lines.More information #ad
Brand | Gates #ad |
Manufacturer | Gates #ad |
Height | 7 Inches |
Length | 7 Inches |
Weight | 1.85 Pounds |
Width | 5 Inches |
Part Number | 27348 |
Model | 27348 |
Warranty | Please contact retailer/seller for assistance |
More information #ad
5. ACDelco
#ad
ACDelco Professional 32103 25 ft Bulk Reel of 5/16 in Fuel Line/PCV/EEC Hose
#adACDelco #ad - At ambient temperatures. Vacuum rating of 24 in/hg for sizes less than 1?2 in I. D. And 10 in/hg for sizes 1?2 in to 3?4 in I. D. Warning: do not use for pressure lines on fuel injected engines or for cooling system applications. Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.More information #ad
Use an acdelco specialty Premium Fuel Injection Hose MPI for fuel injection applications. Nbr-pvc cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Nitrile tube that is spiral reinforced for enhanced durability.Brand | ACDelco #ad |
Manufacturer | ACDelco #ad |
Height | 6 Inches |
Length | 6.5 Inches |
Weight | 2.6 Pounds |
Width | 6 Inches |
Part Number | 32103 |
Model | 32103 |
Warranty | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details. |
More information #ad
6. Gates
#ad
Gates 27349 Barricade Fuel Injection Hose-15' Length, Inner Diameter 3/8"
#adGates #ad - Meets sae 30r14 t2 except for kink resistance, CARB and EPA non-road fuel lines. Oil, heat, ozone, and abrasion-resistant cover. Hnbr tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Multi-fuel compatibility. Extremely low permeation rate.More information #ad
Brand | Gates #ad |
Manufacturer | Gates #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 2.28 Pounds |
Width | 0 Inches |
Part Number | 27349 |
Model | 27349 |
Warranty | Please contact retailer/seller for assistance |
More information #ad
7. Gates
#ad
Gates 27341 Barricade Fuel Injection Hose-25' Length, Inner Diameter 3/8"
#adGates #ad - Multi-fuel compatibility. Hnbr tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Oil, ozone, heat, and abrasion-resistant cover. Meets sae 30r14 t2 except for kink resistance, CARB and EPA non-road fuel lines. Extremely low permeation rate.More information #ad
Brand | Gates #ad |
Manufacturer | Gates #ad |
Height | 7 Inches |
Length | 7 Inches |
Weight | 2 Pounds |
Width | 5 Inches |
Part Number | 27341 |
Model | 27341 |
Warranty | Please contact retailer/seller for assistance |
More information #ad
8. ACDelco
#ad
GM Genuine Parts 12679525 Fuel Injection Throttle Body with Throttle Actuator
#adACDelco #ad - Gm genuine parts are designed, engineered and tested to rigorous standards, and are backed by General Motors. Some gm genuine parts may have formerly appeared as ACDelco GM Original Equipment OE. Gm regularly updates production and service part designs to integrate new materials and technologies.More information #ad
This part requires programming and/or special setup procedures. Gm engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle. Gm service information describes the procedures and special tools needed to ensure proper operation in the vehicle.Brand | ACDelco #ad |
Manufacturer | ACDelco #ad |
Height | 4.6 Inches |
Length | 10.6 Inches |
Weight | 3.75 Pounds |
Width | 6.3 Inches |
Part Number | 12679525 |
Model | 12679525 |
Warranty | 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details. |
More information #ad
9. Continental
#ad
SAE 30R9, 25' Length, Continental 65153 3/8" ID Fuel Injection Hose, Max 100 psi
#adContinental #ad - 25 feet of fuel injection hose designed specifically for auto and truck fuel injection systems. Features high heat resistance. Temperature range: -29°f to 275°f -34°c to 135°c intermittent use at 302°F 150°C. Ensures maximum performance.More information #ad
Highly durable. Maintains full flow. Can be used with gasoline, biodiesel B5, oxidized sour gas, extended gasoline, diesel fuel, b10, ethanol, B20 and lubrication oil. Precision engineered and tested. Working pressure: max 100 psi | Burst Pressure: 900 psi. Inner diameter id: 3/8". 375" | outer diameter OD:. 63".Brand | Continental #ad |
Manufacturer | Continental ContiTech #ad |
Height | 6.1 Inches |
Length | 6.2 Inches |
Width | 6.1 Inches |
Part Number | 65153 |
Model | 65153 |
More information #ad