As an Amazon Associate I earn from qualifying purchases.
SORMOR #ad - 3. Design: dual-outlet y-style, Angle cut, equal length type, Clamps on. Just fix the screw to the appropriate location of tailpipe by Wrench. No weld and drill needed. 5. Application: fits for 2. 4" outlet universal car original exhaust tail pipe.
Corsa #ad - Dual walled design protects against heat distortion. Adorned with high definition, precision laser engraved CORSA logo. Clamp-on Tip Design. Premium Stainless Steel Construction. Corsa performance tip kits are designed to fit directly to CORSA exhaust systems.
Carven Exhaust #ad - Muffler Outlet Diameter 3 inch. Delivers aggressive tone. Muffler inlet diameter 3 inch. Low pressure sound cancellation. Perforated diffuser baffle.
NDRUSH #ad - Fitment: compatible with 2014 2015 2016 2017 chevy corvette c7 front rear side marker lights and rear reflectors NOTE: just wipe the light when using, do not spray water to the film. Give your vehicle blacked out look. Designed with special vinyl channel: adopting special technology allows you to push the liquid and bubbles out easily, no creases in the tint wrap film.
Package including: 1 pair front side marker lights vinyl film + 1 pair rear side marker lights tint covers + 1 pair rear reflectors tint overlays + 1 x squeegee + 2 x clean kits.
Light lens protection: made from the high quality cast vinyl, not easily peel off after go through heavy rain, car wash, which makes your marker light scratch-resistant and weather resistant. The back of the tint kits is adhesive, extreme heat and cold. Recommend wrapping the corners with a heat gun or hairdryer to stick better.
Dynomax #ad - To 4-in. Engineered to last -- 100% stainless-steel construction delivers longer life versus aluminized mufflers. Performance upgrade -- use premium dynomax accessories when installing DynoMax Race Series Bullet muffler for a complete exhaust system upgrade.
Specs -- available in 3. 5-in. Premium acoustic control -- exclusive continuous roving Fiberglass CRF technology absorbs unwanted interior resonance for sound reduction while maintaining a deep race tone.
BLACKHORSE-RACING #ad - Aggressive Deep Sound. Pair of single Chamber Performance Race Muffler. We will assure you will get the best solution and service. Thanks for your encouraging review and feedback! it really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review.
DC Sports #ad - Slanted tip shape. Cut type: Slant Cut. 100 percent stainless Steel With Flat Black Finish. Resonated tips Are To Enhance Sound Output.
Upower #ad - There is 1 year warranty for each purchase. Before to buy, please make sure the Brand Logo "Upower". Pack of 2 dual exhaust tips; Professional installation is highly recommended; No instruction included.
1. SORMOR
#adSormor Red Twill Carbon Fiber Dual-Outlet Y-Style Muffler Pipes Exhaust Tips with Black Stainless Steel, Inlet 63mm2.5inches Outlet 89mm3.5inches
#adMore information #ad
2. Dimension: inlet:63mm2. 5", outlet:89mm3. 5", total length:250mm 9. 8". 4. Installation: easy clamps on installation. 1. Material: sus 304 stainless steel and high quality carbon fiber, rustproof, corrosion resistance, light weight and durable.| Brand | SORMOR #ad |
| Manufacturer | YICHEN #ad |
| Weight | 2.87 Pounds |
| Part Number | YSRB6389N |
More information #ad
2. Corsa
#adCORSA 14131 Exhaust X-Pipe
#adMore information #ad
| Brand | Corsa #ad |
| Manufacturer | CORSA #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 21.5 Pounds |
| Width | 0 Inches |
| Part Number | 14131 |
| Model | 14131 |
| Warranty | Limited Warranty to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were origianlly installed. Corsa Performances obligation under warranty shall be limited to the repair or replacement of parts that are determinded by Corsa Performance to be defective, or refund of the products original purchase prices, at Corsa Performance's option, of the alleged defective product. This warranty does not extend to damaged or defect in the finish of the product or to any product, that in the opinion of Corsa Performance, has been misused, damaged by accident or, negligence, altered or modified in any way, installed contrary to Corsa Performance installation instructions, or repaired by an unauthorized service facility. Corsa Performance makes no warranty for products installed on vehicles used for race or competition purposes. |
More information #ad
3. Corsa
#adCORSA 14062 Exhaust Tip Kit
#adCorsa #ad - Corsa performance tip kits are designed to fit directly to CORSA exhaust systems. Adorned with high definition, precision laser engraved CORSA logo. Dual walled design protects against heat distortion. Clamp-on Tip Design. Premium Stainless Steel Construction.More information #ad
| Brand | Corsa #ad |
| Manufacturer | Corsa Performance #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 10.7 Pounds |
| Width | 0 Inches |
| Part Number | 14062 |
| Model | 14062 |
| Warranty | Limited Warranty to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were origianlly installed. Corsa Performances obligation under warranty shall be limited to the repair or replacement of parts that are determinded by Corsa Performance to be defective, or refund of the products original purchase prices, at Corsa Performance's option, of the alleged defective product. This warranty does not extend to damaged or defect in the finish of the product or to any product, that in the opinion of Corsa Performance, has been misused, damaged by accident or, negligence, altered or modified in any way, installed contrary to Corsa Performance installation instructions, or repaired by an unauthorized service facility. Corsa Performance makes no warranty for products installed on vehicles used for race or competition purposes. |
More information #ad
4. Carven Exhaust
#adCarven Exhaust R-Series Performance Muffler 3"
#adMore information #ad
| Brand | Carven Exhaust #ad |
| Manufacturer | Carven Exhaust #ad |
| Height | 5 Inches |
| Length | 11 Inches |
| Width | 6 Inches |
| Part Number | 942 |
| Model | 942 |
More information #ad
5. NDRUSH
#adNDRUSH Blackout Side Marker Lights & Reflectors Vinyl Tint Film Precut Overlay Sidemarker Wrap Covers Compatible with Chevy Corvette C7 2014 2015 2016 2017
#adPackage including: 1 pair front side marker lights vinyl film + 1 pair rear side marker lights tint covers + 1 pair rear reflectors tint overlays + 1 x squeegee + 2 x clean kits.
More information #ad
Easy to install: this is precut overlays, no modification or trimming needed, just tear off the film and apply the tint cover to your lights. 180 days manufacturer warranty since order purchase date, feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period. Light lens protection: made from the high quality cast vinyl, not easily peel off after go through heavy rain, car wash, which makes your marker light scratch-resistant and weather resistant. The back of the tint kits is adhesive, extreme heat and cold. Recommend wrapping the corners with a heat gun or hairdryer to stick better.
| Brand | NDRUSH #ad |
| Manufacturer | NDRUSH #ad |
| Part Number | FBARFMP24901 |
More information #ad
6. Dynomax
#adDynomax Race Bullet 24250 Exhaust Resonator
#adSpecs -- available in 3. 5-in. Premium acoustic control -- exclusive continuous roving Fiberglass CRF technology absorbs unwanted interior resonance for sound reduction while maintaining a deep race tone.
More information #ad
Inlet/outlet configurations; see product specifications for more information. Flexible solution -- customizable design offered in a variety of styles and sizes for universal fitment may require specialized fabrication and/or welding. Body diameter; 3-in. Ultra-compact design -- features a lightweight, 100% welded ultra-compact design for maximum durability and is ideal for vehicles with limited space. To 4-in.| Brand | Dynomax #ad |
| Manufacturer | Dynomax #ad |
| Height | 4 Inches |
| Length | 6.5 Inches |
| Weight | 2.5 Pounds |
| Width | 4 Inches |
| Part Number | 24250 |
| Model | 24250 |
| Warranty | No Warranty |
More information #ad
7. BLACKHORSE-RACING
#adPair of Single Chamber Performance Race Muffler 2.5" Center / Center Universal Muffler 2.5 Inch
#adMore information #ad
Check product details chart below for other sizes. 7" muffler body length, 2. 5" muffler inlet and outlet diameter, 12" Overall Length, Body Type: 4" x 9" Oval. Universal single chamber race street muffler 2. 50" center in / 2. 50" center out.| Brand | BLACKHORSE-RACING #ad |
| Manufacturer | blackhorseracing #ad |
| Part Number | ER39201-1 |
| Model | ER39201-1 |
More information #ad
8. DC Sports
#adMatte Black Powdercoat, DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Fitment on Most Cars, Sedans, and Trucks
#adMore information #ad
3 bolt clamping system, outlet: 3. 75 inch, inlet: 2. 25 inch, length: 9 Inch. Coated stainless steel Resonated Bolt-On Exhaust Tip- Black. Product dimensions: 2-1/4in inlet X 3-3/4In Outlet X 9In Long.| Brand | DC Sports #ad |
| Manufacturer | DC Sports #ad |
| Height | 2.25 Inches |
| Length | 9 Inches |
| Weight | 1.8 Pounds |
| Width | 3.75 Inches |
| Part Number | EX-1012B |
| Model | EX-1012B |
More information #ad
9. Upower
#adPair of Dual Exhaust Tips Staggered Single Wall 304 Stainless Steel for ID: 2.5 inch/OD: 3.5"/ Length: 10.25"
#adMore information #ad
Weld on installation and Single Layer-Staggered-Straight Cut design. Fits: to ensure proper fit make sure your exhaust INLET diameter is 2. 5 inch. Materials: made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.| Brand | Upower #ad |
| Manufacturer | PartsSquare #ad |
| Height | 7.48 Inches |
| Length | 10.63 Inches |
| Width | 7.48 Inches |
| Part Number | 184284 |
More information #ad
