Top 9 Crankshaft Pulley Removal Tool – Automotive Replacement Engine Crankshaft Pulleys

As an Amazon Associate I earn from qualifying purchases.

1. BETOOLL

#ad

BETOOLL 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit for Honda and Acura Engines

#ad
BETOOLL #ad - Backed by a lifetime replacement guarantee. Use with square socket driver. 1/2" square drive use with breaker bar. Designed with hardened chrome molybdenum steel construction. This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt. Professional grade 50mm socket with offset design for removing/installing many Acura and Honda engine crank bolts.
BrandBETOOLL #ad
Manufacturerszbrt #ad
Part NumberBET-HW3053
ModelBET-HW3053

2. LE-JX

#ad

LE-JX Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder Removal Wrench Tool Compatible with Toyota and Lexus

#ad
LE-JX #ad - Great service support - our offer comprehensive pre-sales and after-sales service for this tools. If you have any questions, please contact us right now. When installing the pulley, insert the drive breaker lever into the tool, you need to bolt the pulley fixing tool to the pulley using the two bolts provided, and align the breaker lever up in the engine compartment, then tighten the crank nut.

Function - easy to install or remove crank bolts on Lexus and Toyota engines. How to use - used with an inch drive impact wrench and a 22 mm impact sleeve to unscrew the crank bolt. Fitment - compatible with engine model: toyota 1996 and later: 3. 0 v6, 4. 0 v6, 3. 0 v6, 4. 7 v8 or 4 cyl: 1983-1995 22re, 4. 3 v8, 1995-2004 2rz & 1995-2004 3rz or lexus 1990 and later: 3. 0 l6, 3. 3 v6, 4. 0 v8, 3. 3 v6, 4. 7 v8.
BrandLE-JX #ad
ManufacturerLE-JX #ad
Part NumberAPTOOLS-FORDSCREWS-02

3. OEMTOOLS

#ad

OEMTOOLS 27019 Harmonic Balancer

#ad
OEMTOOLS #ad - Ideal for Any Shop or Garage. Comes in a sturdy Blow-Mold Storage Case. Set includes: yoke, Pressure Screw, and Pulling Screws. Floating swivel Prevents Damage to Shaft Ends. Great for Pulling Balancers and More.
BrandOEMTOOLS #ad
ManufacturerOEM #ad
Height1.9 Inches
Length9 Inches
Weight2.7 Pounds
Width7 Inches
Part Number27019
Model27019

4. ARES

#ad

Storage Case Included, Harmonic Balancer Puller Set, Remove Damper Pulleys in Tight Engine Compartments Without Removing The Radiator, ARES 71002

#ad
ARES #ad - Includes: this high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. If you have a pet, you realize they are more than a pet, they are part of the family.

It also includes a high quality storage case so you'll never have to go looking for a tool again! Common applications: this set is compatible with Chrysler, SUVs, compatible with Cadillac, vans, compatible with Mitsubishi, and compatible with Oldsmobile cars, compatible with GM, and pickup trucks. The steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES harmonic balancer puller set set, replacement, parts, simply contact customer service for troubleshooting help, or refund.

Reliable | effective | efficient: users trust ares to be quality tools. Item specifications: our harmonic balancer puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. With your support, we’re proud to help this great organization. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program.
BrandARES #ad
ManufacturerARES #ad
Part Number71002
Model8542036071
WarrantyPerformance Assurance Limited Lifetime Warranty

5. Yoursme

#ad

Yoursme for Lexus and Toyota Harmonic Damper Pulley Holder Crankshaft Crank Holding Removal Wrench Tool with 2PCS Crank Bolts

#ad
Yoursme #ad - Compatibility: compatible with lexus 1990 and later: 3. 0 l6, 4. 0 v8, 4. 7 v8; toyota 1996 and later: 3. 0 v6, 4. 7 v8. Great design: small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley.

Satisfaction guarantee: yoursme aims to provide the best service for our customer, simply return it for a full refund in 30 days, if you're not 100% satisfied with our item, no questions asked money back guarantee with 12 months’ warranty. Application: developed to aid in the removal and installation of the crank bolt on Lexus and Toyota engines.

Superior quality: machined from high quality 40Cr steel, abrasion, providing enough strength and durability; and its powder coating is resistant to cracking, rust and damage due to chemical exposure. Also 4 cyl: 1983-1995 22re, 3. 0 v6, 4. 3 v8, 4. 0 v6, 3. 3 v6, 3. 3 v6, 1995-2004 2rz & 1995-2004 3rz. The hole in center of the tool allows access to removal of crank shaft bolt.
BrandYoursme #ad
ManufacturerYoursme #ad
Height2.1 Inches
Length7 Inches
Weight3.06 Pounds
Width4.5 Inches
Part NumberDA784

6. Sunluway

#ad

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

#ad
Sunluway #ad - A must-have tool kit: harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley; Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt. Fitment: harmonic damper pulley holder works on lexus 1990 and later: 3.

0 l6, 4. 0 v6, 3. 0 v6, toyota, 3. 3 v6, nissan, 4. 7 v8; toyota 1996 and later: 3. 0 v6, 4. 3 v8, 4. 7 v8; and 4 cyl: 1983-1995 22re, 3. 3 v6, 1995-2004 2rz & 1995-2004 3rz; cam pulley holder fits many Camry, Mazda, 4.00 v8, ohc and many others please kindly check the size before purchase. Application:  harmonic damper pulley tool helps to remove and install the crank bolt on Lexus and Toyota engines; Cam Holding Tool is great for timing belt changes, cam gear removal, cam seal replacement, camshaft pulleys installation etc.

Premium support & 12-Month Warranty. Satisfaction guarantee: if you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. High quality: this tool kit is constructed from high quality 40Cr steel to provide enough strength and durability; and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
BrandSunluway #ad
ManufacturerSunluway #ad
Part NumberSY0058

7. HFS

#ad

Crankshaft Pulley Puller Toolset, HFSR Professional Harmonic Balancer Tool, Harmonic Balancer Puller

#ad
HFS #ad - This tool eases the removal of the harmonic damper pulleys found on many Chrysle engines. Eliminates the need og a technician to go through the time consuming process of first removing the radiator before being anle to remove the pully. Entire puller set comes packed in a handy blow molded case for ease of storage. Low progflie puller and Time saving tool provides increased productivity.
BrandHFS #ad
ManufacturerHFS #ad
Part NumberHBT-4PCS

8. MOSTPLUS

#ad

MOSTPLUS Damper Crankshaft Crank Pulley Holder Wrench Holder Removal Tool Compatible with Honda Acura Harmonic 50mm

#ad
MOSTPLUS #ad - When servicing the engine and powertrain, it can be used for the removal and installation greatly improve the convenience. Used when loosening/tightening the retaining bolt.

The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt. Used with a 1/2 inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt. Detailed fitment below, pls check it before purchase. Mostplus 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolt compatible with Honda and compatible with Acura engines.
BrandMOSTPLUS #ad
ManufacturerMOSTPLUS #ad
Part NumberB1083

9. EWK

#ad

EWK Crankshaft Crank Pulley Wrench Holder Tool for Honda Acura

#ad
EWK #ad - Great compatibility small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain. Specialty tool ewk professional grade acura and Honda crank pulley tool; holds the harmonic damper pulley in place and keep it from rotating as you tighten or loosen the crankshaft bolt.

Ewk provides you premium Quality tools with 12 months warranty. Best seller on amazon service and safety guaranteed! Qualified ISO and TUV manufacturing process. Tough and sturdy highly recommended by professional mechanics! Constructed with hardened Chrome-Molybdenum steel alloy, extremely durable and solid for life time use.

Wide applications works with a 1/2 inch breaker bar or ratchet, this crankshaft pulley holder fits the hex shape of harmonic balancer on many Honda and Acura 4 cylinder models and V6 engines manufactured after 1990 .
BrandEWK #ad
ManufacturerEWK #ad
Height1.97 Inches
Length4.72 Inches
Width3.15 Inches
Part NumberFBA_EB0036
ModelFBA_EB0036