As an Amazon Associate I earn from qualifying purchases.
1. ABN #ad
And Flywheel, Pulley, ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears #adABN #ad
- Built to last: constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
Damage-free removal: the abn 6" inch 2-jaw gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free. Specifications: 8.
75-inch 22. 2cm jaw spread; 4. 75-inch 12. 1cm jaw reach. Get into tight areas: removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application. 8-position design: the universal and reversible jaws offer versatile inside or outside grip along with short, long, standard, or extra-long reach.
2. TAO+ #ad
6 Inch Single Hook Two Claws Puller Separate Lifting Device #adTAO+ #ad
- The product is forged from chrome vanadium steel, durable, rust-proof and non-slip. The reasonable design of the pulling claw makes it not easy to fall off when applying force. Specification:pulling diameter: 95mm, bracket length: 159mm, screw Length: 165mm, screw diameter bottom: 13mm, Claw Length: 140mm, screw Diameter top: 14mm, Claw Thickness: 3-5mm.
Ultra-thin claw, ultra-high strength, with elastic metal resistance, not easy to pull bad, easy installation. The tip of the ejector pin is a heat-treated rotating head that does not injure other parts and is durable and labor-saving.
3. ABN #ad
And Flywheel, Pulley, ABN 4in 2-Jaw Gear Puller – Removal Tool for Gears #adABN #ad
- Built to last: no need to worry about this hub puller tool falling apart when you need it most; Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
Optimal reach: struggling to access tight, cramped spaces is a thing of the past; Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
Perfect size: 2-jaw transmission gear puller measures 6. 25 inches 15. 9cm with jaw spread; Universal pulley puller has 2. 5-inch 6. 4cm jaw reach for your vehicle maintenance projects; Use any 15mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Perform maintenance with ease: remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool; Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles. Adjustable performance: whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
4. ChgImposs #ad
ChgImposs 8 Inch CR-V Single Hook Two Claws Puller Separate Lifting Device Strengthen Bearing Puller Rama for Auto Car Repair Hand Tools #adChgImposs #ad
- Can be used for automotive flywheel, car wheel, bicycle wheel, machine wheel, motorcycle wheel, etc. Removal tool kit for slide gears, pulley, and flywheel makes removal simple and damage-free. The tip of the ejector pin is a heat-treated rotating head without damage that is durable and labor-saving.
Adjustable clamping depth. The reasonable design of the claws makes them not fall off when the force is applied. Made of chrome vanadium steel for strength and longevity, it is durable.
5. Posi Lock #ad
2 Ton Capacity 3 Jaw Puller, Posi Lock 103 3" Reach, 0.25", 4.5" Spread #adPosi Lock #ad
- Tapered jaws for better access in tight spaces. Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action. Investment cast steel alloy jaws for strength and durability.
Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, gears, wheels, bushings, and pulleys.2-ton pulling capacity, 3" 76. 2mm reach and a spread range of 025 to 4. 25 inches 6. 4 to 114. 3 mm for increased pulling leverage.
6. OTC #ad
7 Ton, Long 2 Jaw, OTC 1036 Mechanical Grip-O-Matic Puller #adOTC #ad
- Maximum reach of 8-3/4 inches. 7 ton capacity, long 2 jaw. Jaw thickness is 11/32 inch. Maximum spread of 9-1/2 inches. Jaw width is 1 inch.
|Warranty||Limited lifetime warranty|
7. Sydien #ad
Sydien Adjustable 2-Jaw Gear Puller Motorcycle Car Auto Removal Tool Kit for Gears, and Flywheel Size : 8", Pulley #adSydien #ad
- Get into tight areas: it can remove gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application. Perfectly fit for automotive flywheel, car wheel, motorcycle wheel, scooter motorcycle bearing and gear and so on.
Widely use: widely use in various bearings that are not easy to disassemble. It has large torque and longevity. Size: 8inch; type: two claws; claw size: 160mm*100mm/ 6. 3" * 3. 94"l*w. Package content: 1 pcs x Two Jaw Puller Tool; Color: Bronze Tone. High quality: made of carbon steel with high strength and heat treatment.
8. DURATECH #ad
Pulleys, DURATECH 8-Inch 3-Jaw Gear Puller, Bearings and Flywheels, Removal Tool for Gears #adDURATECH #ad
- Drive screw is covered by black phosphating, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection.
Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach. This 3-jaw removal tool works with your wrench, ratchet, pulley puller, bearing puller, or spanner as a gear puller, sprocket puller, flywheel puller and more.
Perfect for you to smoothly and safely slide gear, bearing, pulley, and flywheel off the shaft. Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside.
Achieve more with its adjustable and reversible jaws. Drop-forged cr-v steel jaws are heat-treated for extra strength and durability. No need to assemble yourself is the advantage of DURATECH. Make it deal for pulling work in confined areas. Jaw spread: 8in, jaw reach: 9-1/16in, puller: 12t. Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears.
9. ABN #ad
ABN 3-Jaw Gear Puller Set – 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel #adABN #ad
- Damage-free removal: manual bearing pullers remove slide gears, bushings, bearings, pulleys, and flywheels without causing damage to your application. Multi-position design: universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths.
Built to last: forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
Works with your tools: tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal. Durable 3 jaw puller set: use the abn 3, 4, and 6-inch small gear puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears.