As an Amazon Associate I earn from qualifying purchases.
Yonaka Motorsports #ad - Direct bolt on fit to OEM, all installation hardware included. 4" stainless steel exhaust tip. Fully polished stainless steel. Quiet, and deep hum, clean, without the irritating mid range raspy sound.3" mandrel bent piping.
Yonaka Motorsports #ad - Direct bolt on fit to OEM, all installation hardware included. 3. 5" stainless steel exhaust tip. Quiet, clean, and deep hum, without the irritating mid range raspy sound.2. 5" mandrel bent piping. Fully polished stainless steel.
IKON MOTORSPORTS #ad - Fit for 2006-2011 honda civic 4 door sedan oNLY. Package includes: 1x Trunk Spoiler. 30 days limited Warranty. Instructions not included, Professional Installation is Highly Recommended. Material: high quality ABS Plastic | Color: Glossy Black.
EVIL ENERGY #ad - Warranty- evil energy provide muffler have 2-month warranty. We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will serve you within 24 hours.
Quality- straight-through muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound.
Size and material- polished stainless steel, 3 inch outlet, 2 inch inlet, 14.8 inch length just need to measure the inlet of your car before purchase. Working principle- a muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption.
Yonaka Motorsports #ad - Direct bolt on fit to OEM, all installation hardware included. Quiet, and deep hum, clean, without the irritating mid range raspy sound. Fully polished stainless steel. 2. 5" mandrel bent piping. 4. 25" stainless steel exhaust tip.
Walker's #ad - Easy to install -- direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn't require specialized fabrication and/or welding. Premium acoustic control -- oe-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes.
Design validated -- acoustic and flow tested for quality OE-style sound you can count on. Built to last -- internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life.
Yonaka Motorsports #ad - 2. 5" mandrel bent piping. Clean, deep hum, without the irritating mid range raspy sound. Fully polished stainless steel. 4. 25" stainless steel exhaust tip. Direct bolt on fit to OEM, all installation hardware included.
DC Sports #ad - It helps to create a more aggressive sound while adding a sporty look to your vehicle. Design: the multiple point clamp-on exhaust is made using T304 stainless steel that resists corrosion.
Resonated tips are to enhance sound output. Fits 1. 5" to 2" diameter piping. Affordable performance: the exhaust tip is designed to boost the intensity of the exhaust notes.
1. Invidia
#adInvidia HS12HC4GTT N1 Cat-Back Exhaust System with Titanium Tip for Honda Civic Si Sedan
#adInvidia #ad - Package weight: 42. 35 pounds. Country of Origin : Taiwan. Piping diameter: 70 millimeter. Package dimensions: 29. 718 h x 152. 4 l x 48. 768 w centimeters.More information #ad
| Brand | Invidia #ad |
| Manufacturer | Invidia #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 5 Pounds |
| Width | 0 Inches |
| Part Number | HS12HC4GTT |
| Model | HS12HC4GTT |
More information #ad
2. Yonaka Motorsports
#adYonaka 3" Performance Catback Exhaust Compatible/Replacement for Honda Civic 2012-2015 2DR Coupe Si
#adMore information #ad
| Brand | Yonaka Motorsports #ad |
| Manufacturer | Yonaka Motorsports #ad |
| Height | 21 Inches |
| Length | 50 Inches |
| Weight | 29 Pounds |
| Width | 9 Inches |
| Part Number | YMCB-CIV1215-SI-2DR |
More information #ad
3. Yonaka Motorsports
#adYonaka Stainless Steel Performance Catback Exhaust Compatible/Replacement for Honda Civic 2001-2005 2DR/4DR 1.7L only
#adMore information #ad
| Brand | Yonaka Motorsports #ad |
| Manufacturer | Yonaka Motorsports #ad |
| Height | 15 Inches |
| Length | 51 Inches |
| Weight | 29 Pounds |
| Width | 13 Inches |
| Part Number | YMCB-CIV0105 |
More information #ad
4. IKON MOTORSPORTS
#adABS Painted Glossy Black Trunk Boot Lip Rear Spoiler Wing Deck Lid Other Color Available By IKON MOTORSPORTS, Pre-painted Trunk Spoiler Compatible With 2006-2011 Honda Civic, 2007 2008 2009 2010
#adMore information #ad
| Brand | IKON MOTORSPORTS #ad |
| Manufacturer | MUGEN RR #ad |
| Weight | 6 Pounds |
| Part Number | AST-HC064MU-GBK |
More information #ad
5. EVIL ENERGY
#adEVIL ENERGY 2" Inlet 3" Outlet Exhaust Tip Burnt Muffler Universal 14.8" Length
#adQuality- straight-through muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound.
More information #ad
Widely use-evil energy muffler is densely packed with premium, and easy to install, use the soft porous things to absorb sound vibration energy, deep tone, resonated to enhance sound, sound-absorbing cotton producing a low, bolts on in minutes. Size and material- polished stainless steel, 3 inch outlet, 2 inch inlet, 14.8 inch length just need to measure the inlet of your car before purchase. Working principle- a muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption.
| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | ES00060 |
More information #ad
6. Yonaka Motorsports
#adYonaka 2.5" Performance Catback Exhaust Compatible/Replacement for Honda Civic 2006-2011 2DR Coupe 2.0L Si Only
#adMore information #ad
| Brand | Yonaka Motorsports #ad |
| Manufacturer | Yonaka Motorsports #ad |
| Height | 15 Inches |
| Length | 48 Inches |
| Weight | 28 Pounds |
| Width | 11 Inches |
| Part Number | YMCB-CIV0611-SI-2DR |
More information #ad
7. Walker's
#adWalker Exhaust Quiet-Flow 54668 Exhaust Muffler Assembly
#adMore information #ad
Corrosion resistant stainless steel -- the only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection. Design validated -- acoustic and flow tested for quality OE-style sound you can count on. Built to last -- internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life.
| Brand | Walker's #ad |
| Manufacturer | Tenneco (Dynomax, Walker, Thrush) #ad |
| Height | 7.2 Inches |
| Length | 37.5 Inches |
| Weight | 11 Pounds |
| Width | 9.5 Inches |
| Part Number | 54668 |
| Model | 54668 |
| Warranty | Limited Lifetime Warranty |
More information #ad
8. Yonaka Motorsports
#adYonaka 2.5" Performance Exhaust Compatible/Replacement for Honda Civic 2006-2011 2DR Coupe 1.8L DX DX-G EX EX-L LX
#adMore information #ad
| Brand | Yonaka Motorsports #ad |
| Manufacturer | Yonaka Motorsports #ad |
| Height | 15 Inches |
| Length | 48 Inches |
| Weight | 29 Pounds |
| Width | 11 Inches |
| Part Number | YMCB-CIV0611-DX-2DR |
More information #ad
9. DC Sports
#adMatte Black Powdercoat, Sedans, DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Fitment on Most Cars, and Trucks
#adResonated tips are to enhance sound output. Fits 1. 5" to 2" diameter piping. Affordable performance: the exhaust tip is designed to boost the intensity of the exhaust notes.
More information #ad
The exhaust tip is TIG-welded by hand. It has a 3-bolt clamp system for easy installation. It has a straight-through design for top power output. 100 percent stainless steel with Flat Black Finish. Product dimensions: 2-1/4in inlet x 3-3/4in outlet x 9in long. Slanted Tip Shape.| Brand | DC Sports #ad |
| Manufacturer | DC Sports #ad |
| Height | 2.25 Inches |
| Length | 9 Inches |
| Weight | 1.8 Pounds |
| Width | 3.75 Inches |
| Part Number | EX-1012B |
| Model | EX-1012B |
More information #ad
