As an Amazon Associate I earn from qualifying purchases.
1. Zixtec #ad
Zixtec 10 Pack LM2596 DC-DC Buck Converter Step Down Module Power Supply DIP Output 1.25V-30V 3A ZT001 #adZixtec #ad
- 36u thick circuit boards. Input voltage range: dc 3. 2v to 35v input voltage must be higher than the voltage output to 1. 5v or more can not be boosted.
All solid capacitors using SANYO. Output: 1. 25v to 30v dc voltage is continuously adjustable, high efficiency and maximum output current of 3A. High-q inductors with high power output LED indicator.
2. Valefod #ad
Valefod 3 Pack LM2596 DC to DC Voltage Regulator 4-40V to 1.5-35V Buck Converter with LED Display #adValefod #ad
- Factory default stays a high voltage, 1 circle means +/- 1V. Output voltagedc 1. 5v to 35v voltage is continuously adjustable, maximum output current is 3A. Mini size62*35*14 mm with potentiometer.
High precisionthe buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise.
Easy to diyconnect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, clockwise to step up voltage and counterclockwise to step down voltage.3
3pcs included. Suitable for various electronic projects. Input voltagedc 4v to 40v input voltage must be 1. 5v higher than the output voltage, no boost.
3. Jectse #ad
Short Circuit, Over Temperature Protection, Voltage Converter Module DC 5-30V to 1.25-30V,Automatic Step Up/Down Converter,Boost/Buck Voltage Regulator,Regulated Converter Module,Over Current #adJectse #ad
- Regulated power converter module - this is a non-isolated DC regulated power converter module with long service life. High power and stable output, it converts 5-30VDC to 1. 25-30vdc. Note -if reverse input protection is required, input is IN, connect a diode in series with the input.
Wiring method: terminal output, output is OUT. High quality- high quality components ensures high conversion efficiency, up to 93%. Designed with two heat sinks for better heat dissipation.
It supports over current, short circuit, over temperature protection. Product - voltage converter module dc 5-30v to 1. 25-30v, short circuit, regulated converter module, Automatic Step Up/Down Converter, over Current, Boost/Buck Voltage Regulator, Over Temperature Protection.
Specification - input voltage: dc5-30vinput current: 8a, please reduce rated value when output high voltage, within 6a for long-term workOutput Voltage: 1. 25-30v continuously adjustableoutput current: 10a max long-term natural cooling within 5A, MAX 10A, enhance heat dissipation or reduce rated value when module temperature is over 65℃Constant Current Output Range: 02-10a.
4. KOOBOOK #ad
KOOBOOK 2Pcs DC-DC Step Up Down Boost Buck Voltage Converter Module Regulator LM2596 LM2577 4-35V to 1.25-25V #adKOOBOOK #ad
- Size: 50 x 37 x 13mm. Output current: 12v to 5v, maximum 2a output other voltage, calculate current by 15W, formula 15 / output voltage = output current. This module properties: it is non-isolated step-down constant current, constant voltage module CC CV charging module.
This module power output is affect by the module itself-capacity and pre-and post-class load and other factors; the following data for professional equipment measured results, without considering other factors. Input voltage :4-35v;output voltage: 1. 25-25v continuously adjustableDefault voltage 4. 2v, current 1A.
5. RioRand #ad
2 pcs LM2596 DC-DC Buck Converter Step Down Module Power Supply Output 1.23V-30V #adRioRand #ad
- Output: dc 1. 5v to 35v voltage continuously adjustable, high-efficiency maximum output current of 3A. Features: all sanyo solid capacitors, the 36u thickening circuit boards, high-Q inductance with output value of high-power LED indicator.
Input: dc 3v to 40v input voltage must be higher than the output voltage to 1. 5v above can not boost. Dimensions: 45 l * 20 w * 14 H mm with potentiometer. Powered by RioRand advanced technology.
6. DZS Elec #ad
DZS Elec LM2596 DC-DC Buck Converter 4-40V to 1.25-37V Step-Down Regulator Power Module Volt Stabilizer with LED Voltmeter Display Cooling Fin and Copper Cylinder Holder #adDZS Elec #ad
- With reverse voltage protection and short-circuit protection, use more safely. The digital transistor shows the input and or output value more conveniently.
Please note that the input voltage should be higher than the output voltage at least 1. 5 v. High conversion efficiency, simple regulating operation, rotate the top screw of potentiometer clockwise to boost, anti clockwise to reduce voltage.
The continuous and adjustable output range is 1. 25-37 v. The display error of voltage is ¡À 005 v. The matched heat sink and copper cylinder make the usage more conveniently, safely and stably. Self-calibration, adopt lm2596s decompression chip, output stably. The digital can be turn on or off, to show input or output voltage.
7. DORHEA #ad
Dorhea 7PCS LM2596 DC to DC Buck Converter Voltage Regulator 3.0-40V to 1.5-35V Buck Converter DIY Adjustable Power Supply Step Down Module #adDORHEA #ad
- The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise.
Factory default stays a high voltage, you need to contrarotate about 7-8 circles before the voltage starts ramping down, 1 circle means +/- 1V. The lm2596 buck module input and output interface can not be reversed. Dc 1. 5v to 35v voltage is continuously adjustable, maximum output current is 3A.
Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step down voltage. Dc 3v to 40v input voltage must be 1. 5v higher than the output voltage, no boost. Suitable for various electronic projects. The input voltage must be higher than the output voltage.
8. DZS Elec #ad
DZS Elec 2PCS LM2596 DC-DC Step Down Variable Volt Regulator Input 3.2V-40V Output 1.25V-35V Adjustable Buck Converter Electronic Voltage Stabilizer Power Supply Module #adDZS Elec #ad
- The output voltage: 1. 25v-35v. The output current: rated current 2A, Maximum 3A Additional Heat Sink Is Required. The module properties: Non-isolated Constant Current and Voltage Of The Module. Input voltage: 3. 2v-41v. Rectification:Non-Synchronous Rectification.
9. McIgIcM #ad
DC to DC 3.0-40V to 1.5-35V Step Down Power Supply High Efficiency Voltage Regulator Module, 6 Pcs MCIGICM LM2596 Buck Converter #adMcIgIcM #ad
- Output current: 2A Max. Input: dc 3 v to 40 v. Steps: turn the screws before you apply voltage， then connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.
Output: dc 1. 5 v to 35 v. Current: 2a **note** input voltage must be 1. 5 v higher than the output voltage, no boost. All products are tested for stability, consistency and reliability. Ensure product excellence.