Top 9 Starter heat shield – Automotive Replacement Exhaust Heat Shields

As an Amazon Associate I earn from qualifying purchases.

1. Design Engineering

#ad

Design Engineering 010402 Versa-Shield 7" x 24" Starter Heat Shield Wrap

#ad
Design Engineering #ad - Easy to install with hook & loop closure system - no need to remove starter for installation. Additional uses include protecting master cylinders, cool cans, distributors, fuel pumps, and more. Withstands 500 degrees fahrenheit of direct heat and 2000 degrees Fahrenheit of radiant heat. 7-inch wide 24-Inch long. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier. Protect your starters from potential failure caused by under-hood heat soak conditions.
BrandDesign Engineering #ad
ManufacturerDesign Engineering #ad
Height11 Inches
Length8.25 Inches
Weight0.4 Pounds
Width1.25 Inches
Part Number010402
Model010402
WarrantyDEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.

2. A-Team Performance

#ad

A-Team Performance 010402 Starter Heat Shield Barrier Cover Wrap Insulation High Temperature Fiberglass Versa-Shield Aluminized Protection Silver 7"x 24"

#ad
A-Team Performance #ad - Includes 1x a-team performance 7"x 24" Versa-Shield Starter Heat Shield Wrap 010402. Withstands 500 degrees fahrenheit of direct heat and 2000 degrees Fahrenheit of radiant heat. Easy to install with hook & loop closure system - no need to remove starter for installation. An aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier. 7-inch wide by 24-Inch long.
BrandA-Team Performance #ad
ManufacturerA-Team Performance #ad
Part Number010402

3. SWI

#ad

SWI Parts Starter Heat Shield 7" X 22" Wrap Kit W/2 Stainless Steel Zip Ties

#ad
SWI #ad - Prolong your starter's life and improve its performance, Contains no asbestos, and Easy Installation. The starter heat shield is a universal kit that fits all starters; Help prevent starter failure caused by overheating. Non-conductive strap-on heat shield with a highly-reflective mylar surface. The starter heat shield will reflect over 90 per cent of radiant heat up to 2000 degrees Fahrenheit adding life to the starter and assuring reliable starts. 7in x 22in starter heat shield W/2 18 inches long Stainless Steel Zip Ties.
BrandSWI #ad
ManufacturerSW INDUSTRIAL #ad
Height0.1 Inches
Length7 Inches
Weight0.2 Pounds
Width22 Inches
Part Number43237-2
ModelAS722

4. Thermal Zero

#ad

Universal Starter Heat Shield Barrier Blanket, Big Block engines and many more., prevents premature starter failure, Fits starters on Chevrolet, Chrysler, Ford, Small Block, Thermal Zero

#ad
Thermal Zero #ad - Simple, easy to install heat shield wrap with an extremely effective radiant heat reflective surface. Inexpensive, durable solution for starters solenoids that overheat due to exhaust in close proximity. Aluminized layer reflects over 90% of radiant heat up to 2000°F allowing the starter to last longer. Proudly manufactured in the USA. Material can easily be cut to fit most all starters. Very thick aluminized insulation helps to eliminate intermittent starter failure due to radiant heat.
BrandThermal Zero #ad
ManufacturerThermal Zero #ad
Height1.5 Inches
Length8 Inches
Width4.5 Inches
Part NumberUSHB
ModelUSHB

5. A-Team Performance

#ad

A-Team Performance Heat Sheath Aluminized Sleeving for Ultimate Heat Shield Protection Barrier 1/2" x 36" 3ft

#ad
A-Team Performance #ad - Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Provides ultimate protection from extreme heat as well as Chemical and Oil spills, Dirt, Grease and Road grime. Includes 1 x a-team performance heat sheath aluminized Sleeving for Ultimate Heat Shield Protection Barrier 1/2" x 36" 3ft. Withstands 500 degrees f direct, continuous heat and 2000 degrees F radiant heat. Pliable for tight bends, Trim to desired length.
BrandA-Team Performance #ad
ManufacturerA-Team Performance #ad
Part Number010418

6. Thermo-Tec

#ad

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier, 12" x 24"

#ad
Thermo-Tec #ad - Made up of woven silica with a flexible aluminized finish. Can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance. Highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000 degrees Fahrenheit. Adhesive backed side handles direct and continuous temperatures up to 300 degrees Fahrenheit. Protect parts and components, like painted surfaces and plastic parts, from damaging radiant heat.
BrandThermo-Tec #ad
ManufacturerThermo-Tec #ad
Height0 Inches
Length0 Inches
Weight0.1 Pounds
Width0 Inches
Part Number200-10045
Model13575

7. Mr. Gasket

#ad

Mr. Gasket Starter Motor Heat Shield

#ad
Mr. Gasket #ad - Easy installation. Protects the starter. Designed to prevent starter overheat due to extreme exhaust temperature. Durable and long lasting. Heat resistant material sandwiched between 2 aluminum plates.
BrandMr. Gasket #ad
ManufacturerMr Gasket #ad
Height0 Inches
Length0 Inches
Weight0.8 Pounds
Width0 Inches
Part Number3678
Model3678
WarrantyNot applicable

8. Design Engineering

#ad

7" x 2', Design Engineering 010236 ONYX Series Starter Heat Shield

#ad
Design Engineering #ad - Can be trimmed to size and fastens with a hook and loop system that makes it easy to install without removing the starter. Dual layered for maximum thermal control. Multi-purpose in design and fit, distributors, this shield also can be used to wrap most master cylinders, fuel pumps and many other components. Protect your starter from up to 1350 degrees Fahrenheit of direct heat. Provides reliable heat protection for starters under severe duty or extreme heat, preventing starter malfunction due to heat soak.
BrandDesign Engineering #ad
ManufacturerDesign Engineering, Inc. #ad
Height10.94 Inches
Length8.06 Inches
Weight0.46 Pounds
Width0.88 Inches
Part Number010236
Model010236
WarrantyDEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.

9. SWI

#ad

SWI PARTS Universal Starter heat shield 7 X 24 in Wrap Self Attaching

#ad
SWI #ad - The starter heat shield will reflect over 90 per cent of radiant heat up to 2000 degrees Fahrenheit adding life to the starter and assuring reliable starts.

Universal starter heat shield 7 X 24 in Wrap Self-Attaching. The starter heat shield is a universal kit that fits all starters; Help prevent starter failure caused by overheating, Contains no asbestos, Prolong your starter's life and improve its performance, and Easy Installation. Non-conductive strap-on heat shield with a highly-reflective mylar surface. Material: aluminum heat shielding on one side and heat blanketing material fiberglasss.
BrandSWI #ad
ManufacturerSW INDUSTRIAL #ad
Part NumberSW-AS724-1