Top 9 Steering Wheel Lock Plate Removal Tool – Steering Wheel Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Lisle

 #ad

Lisle 57340 Steering Wheel Lock Plate Tool

#ad
Lisle #ad - Fits domestic lock plates, including tilt and telescoping. Comes with standard and metric adapters, plus two puller frames. Tool depresses lock plate for easy removal of lock ring.
BrandLisle #ad
ManufacturerLisle #ad
Height1 Inches
Length9.25 Inches
Weight1.4 Pounds
Width5.5 Inches
Part Number57340
Model57340
WarrantyLIMITED LIFE TIME WARRANTY

2. ABN

 #ad

ABN Steering Wheel Lock Plate Removal Tool

#ad
ABN #ad - Limited Lifetime Warranty. Designed for use on air bagged equipped vehicles. Designed to depress lock plate and remove steering wheel lock plate. Includes 9/16" x 18 and m14 x 1. 55mm adapters. Steering wheel lock plate Removal Tool. Allows for the removal and install on steering wheel lock plate.
BrandABN #ad
ManufacturerABN #ad
Height4.8 Inches
Length1.5 Inches
Weight1.2 Pounds
Width11.3 Inches
Part Number9340
Model13

3. ABN

 #ad

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

#ad
ABN #ad - Package contents: steering wheel removal kit package includes a steering wheel puller and bolts, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements M8-1. 25 x 90 mm, 5/16"-24 x 3-1/2", 3/8"-16 x 3-1/2", non-threaded puller legs, 5/16"-18 x 4" and a carrying case for your convenience; Pivot pin removing tool not included.

Built to last: when used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil not included on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate. Various applications: for most american domestic and import cars and light trucks; remove steering wheels with or without a telescoping tilt or tilt steering columns first remove the horn cover plate and the steering wheel nut when applicable; Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.

Effortlessly remove steering wheels: use the abn | steering wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column. Easy storage: heavy-duty 12. 6” x 2. 25” x 10” inch 32cm x 5.
BrandABN #ad
ManufacturerABN #ad
Height10 Inches
Length12.6 Inches
Weight4.34 Pounds
Width2.25 Inches
Part Number2299
Model8542035858

4. A ABIGAIL

 #ad

A ABIGAIL Steering Wheel Lock Plate Removal Remover Tool

#ad
A ABIGAIL #ad - Functionsteering wheel lock plate removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Service100% satisfaction guarantee, parts, replacement, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for troubleshooting help, or refund.

Our aim is to make you satisfy the parts and the service we provide for you. High qualitya abigail steering wheel lock plate is made made of premium quality materials which is rust and corrosion resistant. Sizereversible adapter includes 9/16"-18and M14-1. 5 threads. Designed for use on air bagged equipped vehicles. It gives the tools high strength and long time performance. Applicationfor depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate.
BrandA ABIGAIL #ad
ManufacturerA ABIGAIL #ad
Part NumberA7631F

5. Powerbuilt

 #ad

Powerbuilt Steering Wheel Lock Plate Remover, 648466

#ad
Powerbuilt #ad - Allows removal of round wire snap ring that retains lock plate. Reversible adapter includes 9/16"-18and M14-1. 5 threads. Depresses lock plate. Reversible adapter includes 9/16 inch-18 and M14-1. 5 threads. Lifetime warranty. Allows removal of round wire snap ring that retains lock plate. For depressing lock plates on GM and Chrysler vehicles.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools, LLC #ad
Height9.75 Inches
Length1.25 Inches
Weight0.75 Pounds
Width4.88 Inches
Part Number648466
Model648466

6. OEM TOOLS

 #ad

OEMTOOLS 25134 Steering Wheel Lock Plate Remover, Standard Yoke | Easy Removal & Installation of Lock Plate Snap Rings When Servicing Steering Wheel Columns | For Tilt & Telescoping Columns

#ad
OEM TOOLS #ad - Heat treated for strength. Heat treated for strength. Works on tilt and telescoping columns. Metric and standard adapter. Works on tilt and telescoping columns. Applicable for professional auto mechanics as well as heavy duty applications. Applicable for professional auto mechanics as well as heavy duty applications. Steering wheel lock plate remover for easy removal and installation of lock plate snap rings. Steering wheel lock plate remover for easy removal and installation of lock plate snap rings when servicing steering wheel columns. Metric and standard adapter.
BrandOEM TOOLS #ad
ManufacturerOEM #ad
Height1.6 Inches
Length11.4 Inches
Weight1.15 Pounds
Width4.6 Inches
Part Number25134
Model25134
WarrantyOEMTOOLS Limited Lifetime

7. Alltrade

 #ad

22 Piece | For Repairing Steering Wheel & Steering Column Components | Storage Case & Instruction Photos Included with Kit, Alltrade 648748 Kit 36 Master Steering Wheel & Lock Plate Puller Tool Set

#ad
Alltrade #ad - Storage case includes usage photos. For servicing steering wheel and steering column components. Kit 36 includes 22-Piece for servicing steering wheel and steering column components.

Tool set for servicing steering wheel and steering column components. Includes lock plate removal tool. Also includes lock plate removal tool. Includes universal steering wheel Puller with 5 different pairs of cap screws to fit the different thread sizes found on most steering wheels. Kit 36 includes 22-Piece for servicing steering wheel and steering column components. Includes 5 different pairs of cap screws. Includes 5 different pairs of cap screws. Storage case includes usage photos. Tool set for servicing steering wheel and steering column components.
BrandAlltrade #ad
ManufacturerAlltrade Tools #ad
Height3.1 Inches
Length15.7 Inches
Width12.6 Inches
Part Number648748
ModelAlltrade 648748
WarrantyManufacturer Warranty

8. ABN

 #ad

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

#ad
ABN #ad - Car maintenance made easy: when removing harmonic balancers, gear pulleys, and crank shaft pulleys, steering wheels, depend on the ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit. Blow-molded case: steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure efficient identification and organization of harmonic balancer puller parts.

Even application: no need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts; Yoke allows for 2 and 3-hole application; Harmonic balancer puller allows even pressure to parts.

Built to last: steering wheel puller kit bits are hardened and tempered to ensure longevity and strength; Machine precision flywheel puller tool designed to withstand extended, repeated use. Fit for your tool kit: wheel puller set includes 1 floating swivel, 2 5/16 by 4 inch 7. 9mm x 101mm bolts, 2 1/4 by 3 inch 6. 3mm x 76mm bolts, 3 1/4 by 2 inch 6. 3mm x 50mm bolts, 3 5/16 by 2 inch 7. 9mm x 50mm bolts.
BrandABN #ad
ManufacturerABN #ad
Height7 Inches
Length9 Inches
Weight2.49 Pounds
Width1.8 Inches
Part Number3224
Model3224

9. Ucostore

 #ad

Shop-Tek/Cal-Hawk Steering Wheel Lock Plate Removal Tool BZSWP, Sold by Ucostore Only

#ad
Ucostore #ad - Works on tilt and telescoping columns. Applicable for professional auto mechanics as well as heavy duty applications. Includes 9/16" x 18 and m14 x 1. 55mm adapters. Steering wheel lock plate remover for easy removal and installation of lock plate snap rings when servicing steering wheel columns. Steering wheel lock plate remover for easy removal and installation of lock plate snap rings.
BrandUcostore #ad
ManufacturerUcostore #ad
Part NumberBZSWP