VIFLY Finder V2 FPV Drone Buzzer with Battery Lost Drone Alarm Compatible with Racing Drone and RC Plane as Normal Buzzer or Standalone Beeper 1pc Pack

#ad
VIFLY #ad - 2 light sensor to detect light intensity automatically and help find the quad in the darkness easier. No extra setting required, it will automatically recognize the device to connect. Vifly finder 2 is programmed to be compatible with any flight controllers to support FPV quad, and receivers for RC airplane.

3 not only work with FPV quad, but also fixed-wing quad. Besides, it enables the buzzer automatically enter into sleep mode at night to save power and not disturb. With its visense-based technology, the VIFLY Finder 2 can power itself to beep even the quad battery has been ejected. Tech specs: sizel x w x h: 24x13x16 mm weight: 5 gramsvolume: Up to 110 dBWorking Time: Up to 30 hoursCharge Time: 1.

VIFLY Finder V2 FPV Drone Buzzer with Battery Lost Drone Alarm Compatible with Racing Drone and RC Plane as Normal Buzzer or Standalone Beeper 1pc Pack #ad - 5 hoursbattery: 80mAh LiPoInput Voltage: 4. 5 - 8. 5 v with the built-in battery, it can work as a normal buzzer or standalone buzzer that beeps loudly after the main battery has been ejected. Super loud that the volume is over 100dB. The built-in light sensor can detect light intensity and then smartly control the LED light to flash.

One-button operation to disarm the buzzer, very easy operation. Be compatible with both FPV quadcopter and RC Airplane.

More information about VIFLY #ad

MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle

#ad
MG Chemicals 422B-55ML #ad - Heat curing will improve the physical strength of this coating. Thinner Cleaner. It is essential that surfaces be free of any trace of grease or organic substances. Curing may be accelerated by applying moderate heat with either a convection oven or infrared lamps. It protects and insulates electrical and electronic components and assemblies, transformers, relays, motors, including generators, and solenoid coils.

At room temperature, the product will tack free in approximately 5-7 minutes, and full cure will be achieved in approximately 48 hours. Ideal for high temperature environments. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Thin up to one half part thinner to one part coating.

MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle #ad - We recommend curing in a convection oven at 65 degree C for one hour, but other temperature and time combinations can work well. Easy rework and repairs: solder through the coating or remove with MG Cat. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. Best results will be obtained by applying to thoroughly cleaned and dried parts or materials.

Rohs compliant. No.

More information about MG Chemicals 422B-55ML #ad


Similar products



Ovonic 14.8V 1550mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY Parts

#ad
Emate #ad - Dimension: 2. 7*1. 26*1. 4inch 69*32*36mm; Net weight: 6. 79oz/pc192g. To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using. Voltage note: please check whether the battery surface is alright when you get it and whether the voltage is between 3.

7~4. 2v before using. No. Specification: material: lithium polymer; battery voltage: 14. 4v; cell: 4s; Cell voltage: 3. 7~4. 2v; capacity: 1550mah; discharge: 100C; Discharge plug: XT60 If the new battey won't hold a full charge or loss the charge very quickly in short time, please use Balance Charger to charge and recycle several times first.

Ovonic 14.8V 1550mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY Parts #ad - . Maximum constant service temperature of 200 °C 392 °F. Application: nemesis 240 mini, danaus, flip fpv 250s mini, vortex, lrc freestyle v1270-296, drone and FPV Only if the voltage, Tweaker 180 Micro Quad, mxp180 fpv quadcopter, dimension and the plug match, flip fpv 260h mini, then it will fit. What you get: ovonic 4s 14.

8v 1550mah 100c xt60 Plug lipo battery. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage.

More information about Emate #ad


Similar products



elechawk 5pcs Silicone Non-Slip Mat Battery Anti Skid Pad Anti-Slip Mat 2mm Thickness Sticker for Racing Drone Quadcopter Multicopter RC

#ad
XTORI #ad - It can effectively prevent the battery from sliding in the frame kit. Easy to cut and easy to use, stick to the battery well. Material: Silicone. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. No. Voltage note: please check whether the battery surface is alright when you get it and whether the voltage is between 3.

7~4. 2v before using. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. 8309 liquid or 8310A Gel stripper formulations. Dimension: 100mm*30mm*2mm. Application: nemesis 240 mini, dimension and the plug match, danaus, tweaker 180 micro quad, flip FPV 250S MINI, vortex, drone and FPV Only if the voltage, LRC Freestyle V1270-296, flip fpv 260h mini, mxp180 fpv quadcopter, then it will fit.

elechawk 5pcs Silicone Non-Slip Mat Battery Anti Skid Pad Anti-Slip Mat 2mm Thickness Sticker for Racing Drone Quadcopter Multicopter RC #ad - What you get: ovonic 4s 14. 8v 1550mah 100c xt60 Plug lipo battery. It can effectively prevent the battery from sliding in the frame kit. Remote control Peripherals/Devices:Battery. Package included: 5 x battery mat Features: This mat is made of silicone with 3M adhesive paste in one side. Specification: material: lithium polymer; battery voltage: 14.

More information about XTORI #ad


Similar products



Team BlackSheep TBS Crossfire Nano RX

#ad
Team BlackSheep #ad - No. Easy to cut and easy to use, stick to the battery well. Material: Silicone. 8309 liquid or 8310A Gel stripper formulations. Team BlackSheep. Voltage note: please check whether the battery surface is alright when you get it and whether the voltage is between 3. 7~4. 2v before using. Full range, listening to our customer requirements, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, and pushing ourselves to the maximum or in this case, designed specifically for mini- and micro-quads! TBS is stepping up the Long Range / UHF game, the minimum!.

Tbs-crossfire-nano-rx. Specificationsweight: 05g receiver onlysize: 11mm x 18mmRequires: Firmware V2. 25 includes1x tbs crossfire nano receiver1x tbs crossfire micro receiver antenna1x spare shrink tube6x 30awg silicon connection wires 2 black, 1 white, 2 red, 1 yellow1 x pin header 1x4 DOWNLOADSTBS Crossfire - RED Declaration of Conformity: http://www.

Team BlackSheep TBS Crossfire Nano RX #ad - Team-blacksheep. Com/doc_ce/id:2028quickstart Guide / Manual: http://www. Team-blacksheep. Com/tbs-crossfire-nano-quickstart. Pdf certified ul 94 v-0 file# E203094.

More information about Team BlackSheep #ad


Similar products



iFlight 25pcs M5 Lock Nuts CW Flanged Nylon Insert Aluminum Alloy Self-Locking Nuts for RC Drone Quadcopter Motor Prop Adapter FPV Parts Mix Colors

#ad
iFlight #ad - Application: nemesis 240 mini, drone and fpv only if the voltage, tweaker 180 micro quad, mxp180 fpv quadcopter, danaus, vortex, dimension and the plug match, LRC Freestyle V1270-296, flIP FPV 250S MINI, flip fpv 260h mini, then it will fit. What you get: ovonic 4s 14. 8v 1550mah 100c xt60 Plug lipo battery.

Voltage note: please check whether the battery surface is alright when you get it and whether the voltage is between 3. 7~4. 2v before using. This mat is made of silicone with 3M adhesive paste in one side. M5 cw flanged nylon insert screw lock nutsspecificationitem name: m5 locknutscolor: black, goldenmaterial:aluminum alloysuitable for 5" / 6" FPV Racing Quadcopter brushless motor installation diameter 5mmFeatureLightweight, red, blue, purple, non-slip locking more reliable than propeller nutsHold super tight with no slippage, secures the props perfectlyPackage included:5pcs m5 locknuts black5pcs m5 locknuts red5pcs m5 locknuts purple5pcs m5 locknuts blue5pcs m5 locknuts golden Certified ul 94 v-0 file# E203094.

iFlight 25pcs M5 Lock Nuts CW Flanged Nylon Insert Aluminum Alloy Self-Locking Nuts for RC Drone Quadcopter Motor Prop Adapter FPV Parts Mix Colors #ad - Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. Dimension: 100mm*30mm*2mm. Maximum constant service temperature of 200 °C 392 °F. Compatible with all 5mm shaft motors 1800 - 2400 brushless motor 2204 2205 2206 2305 2406, DYS, such as ARRIS, EMAX etc.

More information about iFlight #ad


Similar products



AKK X2-Ultimate 5.8GHz 0.01mW/25mW/200mW/600mW/1000mW Switchable FPV Transmitter Compatible with Betaflight OSD FC Configuring Upgraded Long Range Version

#ad
AKK #ad - M5 low profile, ultra-light aluminum flange lock nuts. These flanged lock nuts are very low profile making them perfect for mini motors that don't have a tall prop adapter. Output power: 25mw/200mw/600mw/1000mw port connector: jst, 6pin Antenna connector: MMCX to SMA Dimensions: 32x22mm Weight: 6. 8g without antenna Package includes: 1x 5.

8g x2-ultimate vtx 1x cable  1x mmcx antenna 1x product manual note:  5645, E7, 5925, 5945E4, E8 channels are not available due to FCC regulation. Features: Support Betaflight3. 3 5v output for your camera 001mw power with zero interference 25mw/200mw/600mw/1000mw power switchable One button setup channel/band/power with LED display Support OSD Configuring via Betaflight Flight Control Board LC Filtered power ensure super clean video, born for racing.

AKK X2-Ultimate 5.8GHz 0.01mW/25mW/200mW/600mW/1000mW Switchable FPV Transmitter Compatible with Betaflight OSD FC Configuring Upgraded Long Range Version #ad - Dimension: 2. 7*1. 26*1. 4inch 69*32*36mm; Net weight: 6. 79oz/pc192g. 8309 liquid or 8310A Gel stripper formulations. It can effectively prevent the battery from sliding in the frame kit. Remote control Peripherals/Devices:Battery.

More information about AKK #ad


Similar products



AKK 5pcs 5.8GHz 90 Degrees MMCX to SMA Female FPV Antenna Connector

#ad
AKK #ad - AKK 5pcs 5.8GHz 90 Degrees MMCX to SMA Female FPV Antenna Connector #ad - Specifications: Frequency Range: 5. 8ghz impedance: 50Ω VSWR:.

More information about AKK #ad


Similar products



TBS Crossfire Immortal T Antenna V2 - Extended

#ad
Team BlackSheep #ad - Application: nemesis 240 mini, drone and fpv only if the voltage, dimension and the plug match, vortex, Tweaker 180 Micro Quad, flIP FPV 250S MINI, danaus, mxp180 fpv quadcopter, flip fpv 260h mini, LRC Freestyle V1270-296, then it will fit. What you get: ovonic 4s 14. 8v 1550mah 100c xt60 Plug lipo battery.

Compatible with all 5mm shaft motors 1800 - 2400 brushless motor 2204 2205 2206 2305 2406, such as ARRIS, DYS, EMAX etc. Use these self locking nuts to customize your air-frame and secure your props do not come loose during flight. Tbs-crossfire-nano-rx. Easy rework and repairs: solder through the coating or remove with MG Cat.

TBS Crossfire Immortal T Antenna V2 - Extended #ad - Package included: 5pcs MMCX Antenna. Team BlackSheep. These flanged lock nuts are very low profile making them perfect for mini motors that don't have a tall prop adapter. 001mw/25mw/200mw/600mw/1000mW power switchable. M5 low profile, ultra-light aluminum flange lock nuts. Team blacksheep tbs has managed to improve the immortal T on durability and signal sensitivity.

More information about Team BlackSheep #ad


Similar products



iFlight 4pcs FPV 5V Programmable RGB LED Lights Strip + 40A PDB 3535 Multi-Colors Race Wire for FPV Racing Drone Quadcopter10 Lamps Board

#ad
iFlight #ad - This ensures the nylon inside the nut can actually engage even on short adapters. These flanged lock nuts are very low profile making them perfect for mini motors that don't have a tall prop adapter. The overall size is 45 x 8 x 4mm, suitable for most RC FPV Quadcopte. Easy rework and repairs: solder through the coating or remove with MG Cat.

Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Race wire fpv is designed with 2oz copper and a 2 layer board, it liberates you from extra soldering RGB LED strips job, which is perfect for frames with slim arms. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK.

iFlight 4pcs FPV 5V Programmable RGB LED Lights Strip + 40A PDB 3535 Multi-Colors Race Wire for FPV Racing Drone Quadcopter10 Lamps Board #ad - 001mw/25mw/200mw/600mw/1000mW power switchable. Application: nemesis 240 mini, danaus, drone and fpv only if the voltage, mxp180 fpv quadcopter, LRC Freestyle V1270-296, Tweaker 180 Micro Quad, flip fpv 260h mini, vortex, dimension and the plug match, flIP FPV 250S MINI, then it will fit. What you get: ovonic 4s 14.

8v 1550mah 100c xt60 Plug lipo battery. This mat is made of silicone with 3M adhesive paste in one side. Pack of 25pcs locknuts each color 5pcs, all CW thread. Maximum constant service temperature of 200 °C 392 °F.

More information about iFlight #ad


Similar products



iFlight 5pcs RC LiPo Battery Tie Down Rubberized Straps Non-Slip 20x200mm for FPV Racing Drone Quadcopter Black

#ad
iFlight #ad - Maximum constant service temperature of 200 °C 392 °F. Bottom pdb separated from the top led and works independently, the bottom PDB can withstand 40A continuous current, replaced a section of motor cable for quick and easy installation. Dimension: 2. 7*1. 26*1. 4inch 69*32*36mm; Net weight: 6. 79oz/pc192g. Support parameter adjusted and work with Betaflight, fligth controller, OSD.

Specification: material: lithium polymer; battery voltage: 14. 4v; cell: 4s; Cell voltage: 3. 7~4. 2v; capacity: 1550mah; discharge: 100C; Discharge plug: XT60 Compatible with all 5mm shaft motors 1800 - 2400 brushless motor 2204 2205 2206 2305 2406, such as ARRIS, DYS, EMAX etc. Use these self locking nuts to customize your air-frame and secure your props do not come loose during flight.

iFlight 5pcs RC LiPo Battery Tie Down Rubberized Straps Non-Slip 20x200mm for FPV Racing Drone Quadcopter Black #ad - Dimension: 100mm*30mm*2mm. Voltage note: please check whether the battery surface is alright when you get it and whether the voltage is between 3. 7~4. 2v before using. Race wire fpv is designed with 2oz copper and a 2 layer board, it liberates you from extra soldering RGB LED strips job, which is perfect for frames with slim arms.

More information about iFlight #ad


Similar products