FPVDrone Matek PDB-XT60 Power Distribution Board BEC-5V/2A 12V/0.5A with XT60 Plug for DIY Quadcopter Helicopter

#ad
Matek #ad - Stacked right on top of the CC3D with plenty of room. Description: general: -input voltage range 3s-4s lipo operation: 9 - 18v dc -regulated 5v and 12v outputs -led power indicators 5v & 12v outputs -6 esc outputs & 1 pair VCC/GND pads ESC outputs: -Continuous current: 25A*4 or 15A*6 -Peak current 10 seconds/minute: 30A*4 or 20A*6 BEC 5V output: -Designed for RC Receivers, OSD, Flight controllers, and Servos.

Dc/dc synchronous buck regulator. Voltage: 5. 0 +/- 01vdc -continuous current: 2 Amps Max. 2. 5a 10s/minute -output ripple: 40mv vin=16v, [email protected] load -short-circuit tolerant 5 seconds/minute BEC 12V output: -Designed for Video TX or FPV camera with linear regulator. This board makes the wiring nice, with the bonus of having the XT60 option.

Built-in xt60 socket total 6 pairs esc solder tabs are fit for h or x type frame 5v & short circuit tolerant Package included: 1 x Matek Systems PDB-XT60 The pdb-xt60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 12V Output LED indicators & 4 layers PCB.

FPVDrone Matek PDB-XT60 Power Distribution Board BEC-5V/2A 12V/0.5A with XT60 Plug for DIY Quadcopter Helicopter #ad - It distributes power from a lipo pack to 6 escs, rc receiver, LEDs, flight controllers, Servos, Video Transmitters, as well as providing synchronised regulated DC 5V outputs linear regulated DC 12V for powering Cameras, etc. The pdb-xt60 offers a authentic Amass XT60 plug to connect the LiPo pack conveniently.

4-layer pcb board, high current power and BEC stratification, avoid ground disturbance BEC power current;. The battery should be 4s lipo 13~18V DC - Voltage: 12.

More information about Matek #ad

HOBBYMATE 180Pcs Assorted M3 Nylon Screws Nut Standoffs Spacers for DIY Building of FPV RC Quadcopter Drone, PC mods

#ad
HOMEMART #ad - Total 180 pieces. Come with the plastic box: spacers male-female 6mm + 6mm, m3 10pcs spacers male-female 12mm + 6mm, m3 10pcs spacers male-female 20mm + 6mm, m3 10pcs spacers male-female 15mm + 6mm, m3 10pcs Spacers Male-Female 10mm + 6mm, M3 10pcs Spacers Male-Female 8mm + 6mm, M3 10pcs Screws M3 x 6mm 60pcs Nuts M3 60pcs Package include: 1 Nylon Hex Screw Nut Assortment Kit in box 180pcs nylon hex spacers/ Screws/ Nuts Assorted Kit.

Multifunction: the assortment come with Nylon Hex Spacers, Screw, Nut, Stand-off, applies to many area. There are 3 millimeter bouth size come with beautiful single plastic box. Premium quality: all products are made of durable nylon, Strong, anticorrosive, compact and portable. What you get: 180pcs black m3 nylon hex Spacers Screw Nut Assortment, and our 18-month warranty and friendly customer service.

More information about HOMEMART #ad


Similar products



Frsky XM Plus Mini Full Range Receiver Failsafe D16 Mode Support SBUS Up to 16CH Compatible with Frsky X9D / X9D Plus X9E X12S Transmitter.

#ad
Frsky #ad - Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter. Mini -- weight:16. G, dimension: 21. 5*12*3. 5mml x w x h. Frsky xm plus mini receiver is perfect for those racers who are looking to lower their AUW, especially for FPV racing drone, mini drone, such as 130 110 drone . Package including: 1 * Frsky XM Plus receiver.

. This insanely tiny 2. 4ghz diversity receiver available from Frsky is the next big thing in miniaturization of racing craft. Weighing in at under 2g, this receiver is perfect for those racers who are looking to lower their AUW. These are rated to "full range", so identical to your X4R and D4R setups. Specification- Dimension: 21.

Frsky XM Plus Mini Full Range Receiver Failsafe D16 Mode Support SBUS Up to 16CH Compatible with Frsky X9D / X9D Plus X9E X12S Transmitter. #ad - 5*12*3. 5mml x w x h- Weight: 1. 6g- number of channels: up to 16ch from sbus 1-15ch for PWM, 16ch RSSI for FC- Operating Voltage Range: 3. 7~10v- operating current: 30ma 5v- operating Range: Full range- With RSSI output on board: Analog 0~3. 3v- firmware upgradeable- compatibility: frsky d16 mode--------------------Package Including1 * Frsky XM Plus receiver 180pcs nylon hex spacers/ Screws/ Nuts Assorted Kit.

Multifunction: the assortment come with Nylon Hex Spacers, Stand-off, Screw, Nut, applies to many area. There are 3 millimeter bouth size come with beautiful single plastic box.

More information about Frsky #ad


Similar products



Tattu LiPo Battery Pack 1300mAh 75C 4S 14.8V with XT60 Plug for RC Boat Heli Airplane UAV Drone FPV

#ad
Tattu TA-75C-1300-4S1P #ad - Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter. Mini -- weight:16. G, dimension: 21. 5*12*3. 5mml x w x h. Frsky xm plus mini receiver is perfect for those racers who are looking to lower their AUW, mini drone, especially for FPV racing drone, such as 130 110 drone . Package including: 1 * Frsky XM Plus receiver.

Dedicating to providing better flight experience, Tattu has been continuously putting great efforts in technology research & development and now has become the most famous and professional UAV battery brand over the world. 3. All rights Reserved by Gensace&Tattu. Full range, so identical to your X4R and D4R setups.

Tattu LiPo Battery Pack 1300mAh 75C 4S 14.8V with XT60 Plug for RC Boat Heli Airplane UAV Drone FPV #ad - Failsafe -- frsky xm plus receiver supports failsage function for all channels. Details: brand: tattu capacitymAh: 1300mAh VoltageV: 14. 8v discharge rate c: 75c max burst discharge Rate C: 150C Configuration: 4S1P Net Weightdev. 20g: 155g Lengthdev. 5mm: 72mm Widthdev. 2mm: 36mm Heightdev. 2mm: 29.

More information about Tattu TA-75C-1300-4S1P #ad


Similar products



RunCam Swift2 600TVL FPV Camera FOV 130 Degree 2.5mm Lens Integrated OSD DC 5-36V Support Audio NTSC Orange

#ad
RunCam #ad - Protect your perfectly henever the control signal is lost for a period of time. Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter. Mini -- weight:16. G, dimension: 21. 5*12*3. 5mml x w x h. Frsky xm plus mini receiver is perfect for those racers who are looking to lower their AUW, mini drone, especially for FPV racing drone, such as 130 110 drone .

Package including: 1 * Frsky XM Plus receiver. Full range, so identical to your X4R and D4R setups. Failsafe -- frsky xm plus receiver supports failsage function for all channels. With integrated OSD and Support Audio. Support sbus -- up to 16ch from sbus ch1-ch15 for pwm, ch16 rssi for fc, such as f3, naze32 flight controller .

RunCam Swift2 600TVL FPV Camera FOV 130 Degree 2.5mm Lens Integrated OSD DC 5-36V Support Audio NTSC Orange #ad - Tattu professional lipo Battery; Superior Japan and Korea Lithium Polymer raw materials. Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. Parameter: weight, 155g; dimensionl*w*h, 72*36*29. 4mm; connector, XT60 Plug. Applications: nemesis 240 mini, mini shredder 200, flip fpv frame, zmr 250, mojo 280, mini h, emax nighthawk 250, skylark m4-fpv250, HOVERSHIP MHQ2, hovership mhq2 270, danaus, qav250, indy250 plus, vortex 285, zmr 250, QAV180/210, Emax Nighthawk 250, mini h, etc.

What you get: tattu lipo battery pack with XT60 Plug & Local after-sales service located in Dublin, CA.

More information about RunCam #ad


Similar products



Apex RC Products #3030 - 5 PACK 20mm x 200mm HD Rubberized Battery Straps Non-Slip

#ad
Apex RC Products #ad - Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter. Mini -- weight:16. G, dimension: 21. 5*12*3. 5mml x w x h. Frsky xm plus mini receiver is perfect for those racers who are looking to lower their AUW, mini drone, especially for FPV racing drone, such as 130 110 drone . Package including: 1 * Frsky XM Plus receiver.

We now pack these in a way to avoid the rubber from peeling off the strap when being unpacked. Dc 5-36v /14g / 28. 5mm * 26mm * 26mm. Fits most 3s-4s lipo batterys - perfect For Most 250mm FPV Racer Batteries. Tattu professional lipo Battery; Superior Japan and Korea Lithium Polymer raw materials. Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density.

Apex RC Products #3030 - 5 PACK 20mm x 200mm HD Rubberized Battery Straps Non-Slip #ad - Parameter: weight, 155g; dimensionl*w*h, 72*36*29. 4mm; connector, XT60 Plug. Applications: nemesis 240 mini, qav180/210, mini shredder 200, emax nighthawk 250, hovership mhq2, qav250, indy250 plus, mojo 280, mini h, danaus, zmr 250, mini h, zmr 250, flip fpv frame, hovership mhq2 270, vortex 285, emax nighthawk 250, skylark m4-fpv250, etc.

What you get: tattu lipo battery pack with XT60 Plug & Local after-sales service located in Dublin, CA. Runcam swift 2 600TVL Camera. Works with quads, Drones, Helis, Planes and Cars.

More information about Apex RC Products #ad


Similar products



Spektrum DSMX Quad Race Receiver with Diversity

#ad
Horizon Hobby SPM4648 #ad - Great for Securing Batteries and Electronics. Dsmx quad race Serial Receiver with Diversity. 1/3" sony super had ii ccd / min. Illumination 001lux/1. 2f. Dual antennas provide receiver diversity for solid signal and the long coax antennas help to provide maximum signal strength in all orientations for challenging installations where carbon fiber, metal and batteries shield the antenna.

And with spektrum DSMX 2. 4ghz rf protocol the spektrum DSMX Quad Race receiver provides unsurpassed range and interference free performance for quad racing. Full range, so identical to your X4R and D4R setups. Failsafe -- frsky xm plus receiver supports failsage function for all channels. It also features auto-Bind so you no longer need to carry a separate receiver to bind.

Spektrum DSMX Quad Race Receiver with Diversity #ad - 180pcs nylon hex spacers/ Screws/ Nuts Assorted Kit. Multifunction: the assortment come with Nylon Hex Spacers, Nut, Stand-off, Screw, applies to many area. There are 3 millimeter bouth size come with beautiful single plastic box. Premium quality: all products are made of durable nylon, Strong, anticorrosive, compact and portable.

What you get: 180pcs black m3 nylon hex Spacers Screw Nut Assortment, and our 18-month warranty and friendly customer service.

More information about Horizon Hobby SPM4648 #ad


Similar products



Matek Systems PDB XT60 Power Distribution Board BEC 5V 2A 12V 0.5A with XT60 Plug for DIY Quadcopter Output Support 6 ESC for X or H Design FPV Racing Quad

#ad
HobbyKing PDB-XT60 #ad - The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a lipo pack to 6 escs, servos, flight controllers, rc receiver, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Video Transmitters, LEDs, etc.

Total 6 pairs esc solder tabs are fit for H or X type frame. Protect your perfectly henever the control signal is lost for a period of time. It also provides linear regulated dc 12v for powering Cameras, LEDs, Video Transmitters, Servos, Flight Controllers, RC receiver, etc. With integrated OSD and Support Audio.

Matek Systems PDB XT60 Power Distribution Board BEC 5V 2A 12V 0.5A with XT60 Plug for DIY Quadcopter Output Support 6 ESC for X or H Design FPV Racing Quad #ad - Great for Securing Batteries and Electronics. Fits most 3s-4s lipo batterys - perfect For Most 250mm FPV Racer Batteries. 5v & 12v output led indicators & Short circuit tolerant. Works with quads, Helis, Drones, Planes and Cars. Non-slip rubberized coating - Keeps Batteries & Electronics Securely in Place! Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter.

Mini -- weight:16. G, dimension: 21.

More information about HobbyKing PDB-XT60 #ad


Similar products



RJXHOBBY SP Racing F3 EVO Betaflight Flight Controller for 180 184 195 210 250 280 FPV Racing Drone

#ad
RJXHOBBY #ad - The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a lipo pack to 6 escs, rc receiver, servos, Flight Controllers, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Video Transmitters, LEDs, etc.

Total 6 pairs esc solder tabs are fit for H or X type frame. Support sbus -- up to 16ch from sbus ch1-ch15 for pwm, ch16 rssi for fc, such as f3, naze32 flight controller . Save 4. We now pack these in a way to avoid the rubber from peeling off the strap when being unpacked. Great for Securing Batteries and Electronics.

RJXHOBBY SP Racing F3 EVO Betaflight Flight Controller for 180 184 195 210 250 280 FPV Racing Drone #ad - Microsd: the spracing f3evo supports MicroSD/SDHC up to 32GB. The flight controller is linked by pins, comes with all pins and mounts required. Works with quads, Helis, Drones, Planes and Cars. Non-slip rubberized coating - Keeps Batteries & Electronics Securely in Place! Set mag_hardware=auto 2. Save 4. Support 2-6s, when the input voltage is 2-3S, can choose the 12V output via welding spot for battery voltage.

Press enter; if you need barometer, if you need Magnetic and Barometer, please input: 1.

More information about RJXHOBBY #ad


Similar products



SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2

#ad
onelinkmore OL0444-X #ad - Commercial Grade Connector. With integrated OSD and Support Audio. Dsmx quad race Serial Receiver with Diversity. Great for Securing Batteries and Electronics. The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a lipo pack to 6 escs, rc receiver, servos, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, LEDs, Video Transmitters, Flight Controllers, etc.

Total 6 pairs esc solder tabs are fit for H or X type frame. Press eNTER. Do not forget to make solder bridges on the back side to set the voltage to the front-top camera connection, and the front-rear video-transmitter. Please do read the descriptions and Pictures Manual Carefully to Make Sure You Can Use Our Flight Controller Correctly!

SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2 #ad - Compatible -- compatible with Frsky X9D Plus X9E X12S transmitter. Mini -- weight:16. G, dimension: 21. 5*12*3. 5mml x w x h. Frsky xm plus mini receiver is perfect for those racers who are looking to lower their AUW, mini drone, especially for FPV racing drone, such as 130 110 drone . Package including: 1 * Frsky XM Plus receiver.

More information about onelinkmore OL0444-X #ad


Similar products



NIDICI 50pcs FPV Sponge Mat Landing Pad Anti-vibration Foam Sticky Tape for X QAV-X Quadcopter Multicopter Frame

#ad
NIDICI #ad - Press enter; if you need barometer, if you need Magnetic and Barometer, please input: 1. Package content : 2 x SMA Female to Male Adapter. With integrated OSD and Support Audio. Microsd: the spracing f3evo supports MicroSD/SDHC up to 32GB. The flight controller is linked by pins, comes with all pins and mounts required.

Sma 90 degree angle adapter jack to Plug; Commercial Grade SMA Series Adapters. Teflon insulator ; Color: Gold. We now pack these in a way to avoid the rubber from peeling off the strap when being unpacked. Sma male with a pin in center to SMA Female with A hole in center. Better than Aluminum column. 5v & 12v output led indicators & Short circuit tolerant.

NIDICI 50pcs FPV Sponge Mat Landing Pad Anti-vibration Foam Sticky Tape for X QAV-X Quadcopter Multicopter Frame #ad - 1/3" sony super had ii ccd / min. Illumination 001lux/1. 2f. Dsmx quad race Serial Receiver with Diversity. The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a lipo pack to 6 escs, rc receiver, servos, Flight Controllers, Video Transmitters, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, LEDs, etc.

More information about NIDICI #ad


Similar products