iFlight 2 Sets TPU Runcam Micro Swift Camera Mount Adapters 3D Printing for FPV Racing Drone Quadcopter

#ad
iFlight #ad - Compatible with iflight ix5 v2/ xl5/ ix3 v2 and other frame kits which also fit for 1177 standard camera. Pack of 2 sets of camera mount adapter. Runcam micro swift camera mount for fpv racing drone quadcopterdescriptions:These mounting adapters allow you to mount a Micro Swift in any frame that is made for a standard 28mm wide swift camera, which comes with side adjustable camera protection mounts like iX3 V2, iX5 V2.

Just use the standard screws that came with your micro swift to mount the adapters to your camera, and the included countersunk screw and nut to connect to your frame. 3d printed from flexible and durable TPU material. Now you don't need to worry about how to mount that micro swift in your standard frame, and still benefit from the weight savings!Package Included2 set x TPU Camera MountNote:camera and frame are not included These mounting adapters allow you to mount a Micro Swift in any frame that is made for a standard 28mm wide swift camera.

iFlight 2 Sets TPU Runcam Micro Swift Camera Mount Adapters 3D Printing for FPV Racing Drone Quadcopter #ad - Super lightweight, and durable.

More information about iFlight #ad

FrSky R-XSR Ultra Mini Redundancy Full Telemetry Receiver

#ad
FrSky #ad - The r-xsr is a standalone receiver with all the functions of XSR, in addition, it's almost 1/3 size and 1/3 weight of XSR receiver. Frsky ultra mini receiver R-XSR is the evolution of FrSky full range XSR receiver. Support telemetry and Smart Port enabled. Ipex connector, replaceable antennas. Supports redundancy function.

. Switchable sbuS/ CPPM signal output. Moreover, there redundancy function is integrated into this tiny receiver ensures the security, and the IPEX connector makes it more convenient for you to replace antennas. Specifications Dimension: 16*11*5. 4mm l*w*h weight: 1. 5g number of channels: 16ch 1-16ch from sbus channel, 1~8ch from cppm channel operating Voltage Range: 4~10V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Ultra mini size and light weight.

More information about FrSky #ad


Similar products



nidici RHCP Super Mini Stubby 5.8GHz 5dbi Antenna For FPV Transmitter TX Receiver RX Fatshark Goggles RC Models Toy SMA, Black

#ad
nidici #ad - Quality better than pagoda antenna. Supports redundancy function. Abs material shell,more durable than other 5. 8g antenna. Ipex connector, replaceable antennas. Works great as both a transmitting or receiving antenna. Support telemetry and Smart Port enabled. Switchable sbuS/ CPPM signal output. Short and small, easy to install on your quad drones.

Specifications: Brand Name : nidici Weight: 6. 7g length:28mm gain: 5dBi Axial Ratio:074 frequency:5000-6000mhz radiation efficiency: 98% Connector:SMA Works great as both a transmitting or receiving antenna Compatible with other styles of 5. 8ghz rhcp antennas package Included : 1 x Mini 5. 8g 5dbi antenna Ultra mini size and light weight.

More information about nidici #ad


Similar products



RunCam Micro Eagle FPV Camera 800TVL NTSC/PAL 4:3/16:9 Switchable Global WDR Micro CMOS Cam for FPV Racing Drone by Crazepony

#ad
Crazepony 4336304939 #ad - Abs material shell,more durable than other 5. 8g antenna. Support telemetry and Smart Port enabled. Runcam micro eagle fpv camera 800tvl ntsc/pal 4:3/16:9 switchable global wdr micro CMOS Cam for FPV Racing Drone Model: RunCam Micro Eagle Image Sensor: 1/1. 8" cmos sensor horizontal resolution: 800tvl fov :170 @ 16:9 fov :140 @ 4:3 screen format: 16:9 / 4:3 switchable on osd menu signal system: nTSC / PAL Switchable on OSD menu Mirror/Flip: Yes S/N Ratio: >50dB Electronic Shutter Speed: Auto Max Gain: 1-9 Level Min.

Illumination: [email protected] 2f wdr: level 1-6 available day/night: auto/external/color/b&w power: dc 5-36V Current: [email protected] / [email protected] Housing Material: ABS Net Weight: 8. 5g dimensions: l19mm*w19mm*h22mm packing include: 1 * camera 1 * aluminum bracket 1 * Set of screws 1 * OSD Key-press Board 1 * 3pin FPV silicone cable 1 * Manual Ultra mini size and light weight.

RunCam Micro Eagle FPV Camera 800TVL NTSC/PAL 4:3/16:9 Switchable Global WDR Micro CMOS Cam for FPV Racing Drone by Crazepony #ad - Short and small, easy to install on your quad drones. Professional fpv camera with global WDR, WDR level 1-6 available, best camera for FPV racing quadcopter vehicle. 100% tested, us warehouse, long time warranty, commit to FULL refund if not satisfied. Switchable sbuS/ CPPM signal output. Supports redundancy function.

19*19mm micro cmos fpv camera, it's perfect for smaller builds as it only weighs at 8.

More information about Crazepony 4336304939 #ad


Similar products



MG Chemicals Silicone Modified Conformal Coating, 55 ml Bottle with Brush Cap

#ad
MG Chemicals 422B-55ML #ad - Thin up to one half part thinner to one part coating. Silicone conformal coating 422b is a flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock. 435 thinner or Cat. Abs material shell,more durable than other 5. 8g antenna. Mirror & flip image available.

19*19mm micro cmos fpv camera, it's perfect for smaller builds as it only weighs at 8. 5g. Curing may be accelerated by applying moderate heat with either a convection oven or infrared lamps. Switchable sbuS/ CPPM signal output. Works great as both a transmitting or receiving antenna. It is essential that surfaces be free of any trace of grease or organic substances.

MG Chemicals Silicone Modified Conformal Coating, 55 ml Bottle with Brush Cap #ad - At room temperature, the product will tack free in approximately 5-7 minutes, and full cure will be achieved in approximately 48 hours. Supports redundancy function. 100% tested, us warehouse, long time warranty, commit to FULL refund if not satisfied. Maximum service Temperature of 200 °C. Ntsc/pal switchable, 16:9/4:3 switchable on OSD menu.

8310 stripper.

More information about MG Chemicals 422B-55ML #ad


Similar products



M3 Flight Controller Anti-Vibration Fixed Screws Mounting Hardware Standoffs Spacer for Naze32 CC3D F3 F4 Flight Controller

#ad
LongJinSheng #ad - Switchable sbuS/ CPPM signal output. Certified ul 94v-0 file # E203094 verticle flame test. Professional fpv camera with global WDR, WDR level 1-6 available, best camera for FPV racing quadcopter vehicle. Mirror & flip image available. 19*19mm micro cmos fpv camera, it's perfect for smaller builds as it only weighs at 8.

5g. Easy rework and repairs: solder through the coating or remove with MG Cat. Ipex connector, replaceable antennas. 8310 stripper. 435 thinner or Cat. Ntsc/pal switchable, 16:9/4:3 switchable on OSD menu. Supports redundancy function. Protects electronics from moisture, fungus, thermal shock, corrosion, and static discharges.

M3 Flight Controller Anti-Vibration Fixed Screws Mounting Hardware Standoffs Spacer for Naze32 CC3D F3 F4 Flight Controller #ad - Easy to inspect: contains an UV Indicator that glows under ultra-violet black light. Support telemetry and Smart Port enabled. Anti-vibration screws are the best way to soft mount your flight controller. Flight controller anti-vibration screws are easy to install, perfect fit, and significant vibration elimination.

Compatible with:qav250 qav-r 220 flight controller for Naze32 CC3D F3 F4 PDB PCB Power Distribution Board. Material: rubber and Ultra Hard and Durable Alloy Steel and brass.

More information about LongJinSheng #ad


Similar products



iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 smaller IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller pack of 20pcs

#ad
iFlight #ad - Short and small, easy to install on your quad drones. No. Support telemetry and Smart Port enabled. Ipex connector, replaceable antennas. Switchable sbuS/ CPPM signal output. Protects electronics from moisture, corrosion, fungus, thermal shock, and static discharges. Easy to inspect: contains an UV Indicator that glows under ultra-violet black light.

100% tested, long time warranty, US warehouse, commit to FULL refund if not satisfied. Maximum service Temperature of 200 °C. Works great as both a transmitting or receiving antenna. Easy rework and repairs: solder through the coating or remove with MG Cat. Abs material shell,more durable than other 5. 8g antenna.

iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 smaller IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller pack of 20pcs #ad - 19*19mm micro cmos fpv camera, it's perfect for smaller builds as it only weighs at 8. 5g. No. 8310 stripper. 5. 9 inch 150mm - length, rF113 Silver plated Wire Material. Supports redundancy function.

More information about iFlight #ad


Similar products



FPV Antenna Adapter SMA Male to Female 45 Degree Antenna Adapter Gold Plated Connector for FPV Race RX5808 Fatshark Goggles Pack of 2

#ad
onelinkmore OL-3310 #ad - Support telemetry and Smart Port enabled. Short and small, easy to install on your quad drones. Mirror & flip image available. Abs material shell,more durable than other 5. 8g antenna. No. Category: connectors, unused family: coaxial, interconnectsCondition: New, RF AdaptersStyle:45 degree Angle Adapter Contactor plating:GoldplatedHandy and useful converter for home internet or FPV use Ultra mini size and light weight.

Certified ul 94v-0 file # E203094 verticle flame test. Professional fpv camera with global WDR, WDR level 1-6 available, best camera for FPV racing quadcopter vehicle. 435 thinner or Cat. 100% tested, long time warranty, US warehouse, commit to FULL refund if not satisfied. Maximum service Temperature of 200 °C.

FPV Antenna Adapter SMA Male to Female 45 Degree Antenna Adapter Gold Plated Connector for FPV Race RX5808 Fatshark Goggles Pack of 2 #ad - Precision machining, High sensitivity, Low loss signal stability, High quality. A must have for frsky XM+ and X4R rx/tx field repair. Ipex connector, replaceable antennas. Sma male with a pin in center to SMA Female with A hole in center. Ntsc/pal switchable, 16:9/4:3 switchable on OSD menu.

More information about onelinkmore OL-3310 #ad


Similar products



iFlight iH3 Dual Split Mini 3 inch FPV Frame for Aerial Filming Carbon Fiber Drone Frame Mini Quadcopter

#ad
iFlight #ad - No. Supports redundancy function. Abs material shell,more durable than other 5. 8g antenna. 5. 9 inch 150mm - length, rF113 Silver plated Wire Material. Teflon insulator ; color: Gold;Material: CopperNot Alloy, Low-loss. Ntsc/pal switchable, 16:9/4:3 switchable on OSD menu. It features front & back twin-towers structure, which completely solve the problem of 'High Tower'.

Smaller ipex connector type fit for new FRSKY X4R-SB frsky xm mini receivers. Anti-vibration screws are the best way to soft mount your flight controller. Flight controller anti-vibration screws are easy to install, perfect fit, and significant vibration elimination. Compatible with:qav250 qav-r 220 flight controller for Naze32 CC3D F3 F4 PDB PCB Power Distribution Board.

iFlight iH3 Dual Split Mini 3 inch FPV Frame for Aerial Filming Carbon Fiber Drone Frame Mini Quadcopter #ad - Material: rubber and Ultra Hard and Durable Alloy Steel and brass. Recommended to use with our nylon screws, ASIN:B07214815H. 2. 4g receiver antenna with IPEX 4 Generation connector. Precision machining, Low loss signal stability, High sensitivity, High quality. A must have for frsky XM+ and X4R rx/tx field repair.

2mm thickness vertical side plates can protect the camera from damage even it's camera front protraction design.

More information about iFlight #ad


Similar products



Finware 10 Pair Amass XT30U XT30 Upgrade Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

#ad
Finware #ad - Sma male with a pin in center to SMA Female with A hole in center. Made of high temperature nylon the plug is also less likely to deform or melt. 12" black and 12" Red 3. 5mm high quality Heat Shrink Tubing 2:1 included. Professional fpv camera with global WDR, WDR level 1-6 available, best camera for FPV racing quadcopter vehicle.

Compatible with runcam split mini which make fpv and recording camera 2 in 1. No extra gopro, sq11 or hawkeye Firefly micro action cam needed which can reduce the drone weight effectively. Mirror & flip image available. Heat shrink 3. 5mm 2:1 both red and Black Included - 2 Feet Total. It features front & back twin-towers structure, which completely solve the problem of 'High Tower'.

Finware 10 Pair Amass XT30U XT30 Upgrade Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery #ad - For fpv race rx5808 fatshark goggles antenna, signal Booster, Repeaters, Radio, Extension Cable, rf coaxial coax, FPV Drone, FPV Quadcopter Multicopter. Package content :2 x SMA Adapter. 15 amp 30a instantaneous Current Handling Bullet Connectors. No. High temperature Nylon Material XT-305.

More information about Finware #ad


Similar products



Caddx FPV Camera, Turbo Micro F1 FPV Came 1/3" CMOS Sensor 1200 TVL 2.1mm IR Blocked NTSC DC 5V-40V Wide Voltage for FPV Racing Drone, 5.5g, Yellow

#ad
Caddx 4335041651 #ad - Professional fpv camera with global WDR, WDR level 1-6 available, best camera for FPV racing quadcopter vehicle. Compatible with runcam split mini which make fpv and recording camera 2 in 1. No extra gopro, sq11 or hawkeye Firefly micro action cam needed which can reduce the drone weight effectively. Teflon insulator ; color: Gold;Material: CopperNot Alloy, Low-loss.

Sma male with a pin in center to SMA Female with A hole in center. Smaller ipex connector type fit for new FRSKY X4R-SB frsky xm mini receivers. Ipex connector, replaceable antennas. 435 thinner or Cat. Support telemetry and Smart Port enabled. 19*19mm micro cmos fpv camera, it's perfect for smaller builds as it only weighs at 8.

Caddx FPV Camera, Turbo Micro F1 FPV Came 1/3" CMOS Sensor 1200 TVL 2.1mm IR Blocked NTSC DC 5V-40V Wide Voltage for FPV Racing Drone, 5.5g, Yellow #ad - 5g. 5. 9 inch 150mm - length, rF113 Silver plated Wire Material. 2mm thickness vertical side plates can protect the camera from damage even it's camera front protraction design. Super image sensor】: 1/3" cMOS sensor, low latency to provide high quality image. Wide voltage range】: d-wdr; double scan WDr and Aspect Ration: 16:9.

Xt-30u connector for rc Lipo Batteries Drones Airplanes Cars Vehicles.

More information about Caddx 4335041651 #ad


Similar products